The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
High-Performance and Rapid-Response Electrical Heaters Based on Ultraflexible, Heat-Resistant, and Mechanically Strong Aramid Nanofiber/Ag Nanowire Nanocomposite Papers
Abstract
High-performance and rapid response electrical heaters with ultraflexibility, superior heat resistance, and mechanical properties are highly desirable for the development of wearable devices, artificial intelligence, and high-performance heating systems in areas such as aerospace and the military. Herein, a facile and efficient two-step vacuum-assisted filtration followed by hot-pressing approach is presented to fabricate versatile electrical heaters based on the high-performance aramid nanofibers (ANFs) and highly conductive Ag nanowires (AgNWs). The resultant ANF/AgNW nanocomposite papers present ultraflexibility, extremely low sheet resistance (minimum R s of 0.12 Ω/sq), and outstanding heat resistance (thermal degradation temperature above 500 °C) and mechanical properties (tensile strength of 285.7 MPa, tensile modulus of 6.51 GPa with a AgNW area fraction of 0.4 g/m 2 ), benefiting from the partial embedding of AgNWs into the ANF substrate and the extensive hydrogen-bonding interactions. Moreover, the ANF/AgNW nanocomposite paper-based electrical heaters exhibit satisfyingly high heating temperatures (up to ∼200 °C) with rapid response time (10–30 s) at low AgNW area fractions and supplied voltages (0.5–5 V) and possess sufficient heating reliability, stability, and repeatability during the long-term and repeated heating and cooling cycles. Fully functional applications of the ANF/AgNW nanocomposite paper-based electrical heaters are demonstrated, indicating their excellent potential for emerging electronic applications such as wearable devices, artificial intelligence, and high-performance heating systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Ri Kim, H., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,136
Vosgueritchian, M., Lipomi, D. J., & Bao, Z. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101775 · Cited by 1,174
Dispersions of Aramid Nanofibers: A New Nanoscale Building Block
Yang, M., Cao, K., Sui, L., Qi, Y., Zhu, J., Waas, A., Arruda, E. M., Kieffer, J., Thouless, M. D., & Kotov, N. A. (2011) · ACS Nano · doi:10.1021/nn2014003 · Cited by 852
Highly Stretchable and Transparent Metal Nanowire Heater for Wearable Electronics Applications
Hong, S., Lee, H., Lee, J., Kwon, J., Han, S., Suh, Y. D., Cho, H., Shin, J., Yeo, J., & Ko, S. H. (2015) · Advanced Materials · doi:10.1002/adma.201500917 · Cited by 788
Chen, J., Huang, X., Sun, B., & Jiang, P. (2019) · ACS Nano · doi:10.1021/acsnano.8b06290 · Cited by 768
Choi, S., Park, J., Hyun, W., Kim, J., Kim, J., Lee, Y. B., Song, C., Hwang, H. J., Kim, J. H., Hyeon, T., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b02790 · Cited by 568
Personal Thermal Management by Metallic Nanowire-Coated Textile
Hsu, P.-C., Liu, X., Liu, C., Xie, X., Lee, H. R., Welch, A. J., Zhao, T., & Cui, Y. (2015) · Nano Letters · doi:10.1021/nl5036572 · Cited by 544
High-Performance Graphene-Based Transparent Flexible Heaters
Kang, J., Kim, H., Kim, K. S., Lee, S.-K., Bae, S., Ahn, J.-H., Kim, Y.-J., Choi, J.-B., & Hong, B. H. (2011) · Nano Letters · doi:10.1021/nl202311v · Cited by 539
Transparent Film Heater Using Single‐Walled Carbon Nanotubes
Yoon, Y. ‐., Song, J. ‐., Kim, D., Kim, J., Park, J. ‐., Oh, S. ‐., & Han, C. ‐. (2007) · Advanced Materials · doi:10.1002/adma.200701173 · Cited by 354
Performance enhancement of metal nanowire transparent conducting electrodes by mesoscale metal wires
Hsu, P.-C., Wang, S., Wu, H., Narasimhan, V. K., Kong, D., Ryoung Lee, H., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms3522 · Cited by 308
Cited by
Fabrication, Applications, and Prospects of Aramid Nanofiber
Yang, B., Wang, L., Zhang, M., Luo, J., Lu, Z., & Ding, X. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000186 · Cited by 484
Self-citationZeng, Z., Jiang, F., Yue, Y., Han, D., Lin, L., Zhao, S., Zhao, Y., Pan, Z., Li, C., Nyström, G., et al. (2020) · Advanced Materials · doi:10.1002/adma.201908496 · Cited by 336
MXene‐Reinforced Cellulose Nanofibril Inks for 3D‐Printed Smart Fibres and Textiles
Cao, W., Ma, C., Mao, D., Zhang, J., Ma, M., & Chen, F. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201905898 · Cited by 332
He, H., Liu, J., Wang, Y., Zhao, Y., Qin, Y., Zhu, Z., Yu, Z., & Wang, J. (2022) · ACS Nano · doi:10.1021/acsnano.1c10144 · Cited by 282
Metadata
- Authors
- Ma, Z., Kang, S., Ma, J., Shao, L., Wei, A., Liang, C., Gu, J., Yang, B., Dong, D., Wei, L., & Ji, Z.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-06-18
- Volume
- 13
- Issue
- 7
- Pages
- 7578-7590
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2950650854
- Cited by
- 450
- References
- 49
- FWCI
- 20.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: High-Performance and Rapid-Response Electrical Heaters Based on Ultraflexible, Heat-Resistant, and Mechanically Strong Aramid Nanofiber/Ag Nanowire Nanocomposite Papers. https://app.cochat.ai/papers/10.1021/acsnano.9b00434
- The paper
- Ma, Z., Kang, S., Ma, J., Shao, L., Wei, A., Liang, C., Gu, J., Yang, B., Dong, D., Wei, L., & Ji, Z. (2019). High-Performance and Rapid-Response Electrical Heaters Based on Ultraflexible, Heat-Resistant, and Mechanically Strong Aramid Nanofiber/Ag Nanowire Nanocomposite Papers. ACS Nano. https://doi.org/10.1021/acsnano.9b00434
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.