The DOI matches its Crossref record; 49 of the 49 references it cites were found in a registry or an index.
High-Performance and Rapid-Response Electrical Heaters Based on Ultraflexible, Heat-Resistant, and Mechanically Strong Aramid Nanofiber/Ag Nanowire Nanocomposite Papers
Abstract
High-performance and rapid response electrical heaters with ultraflexibility, superior heat resistance, and mechanical properties are highly desirable for the development of wearable devices, artificial intelligence, and high-performance heating systems in areas such as aerospace and the military. Herein, a facile and efficient two-step vacuum-assisted filtration followed by hot-pressing approach is presented to fabricate versatile electrical heaters based on the high-performance aramid nanofibers (ANFs) and highly conductive Ag nanowires (AgNWs). The resultant ANF/AgNW nanocomposite papers present ultraflexibility, extremely low sheet resistance (minimum R s of 0.12 Ω/sq), and outstanding heat resistance (thermal degradation temperature above 500 °C) and mechanical properties (tensile strength of 285.7 MPa, tensile modulus of 6.51 GPa with a AgNW area fraction of 0.4 g/m 2 ), benefiting from the partial embedding of AgNWs into the ANF substrate and the extensive hydrogen-bonding interactions. Moreover, the ANF/AgNW nanocomposite paper-based electrical heaters exhibit satisfyingly high heating temperatures (up to ∼200 °C) with rapid response time (10–30 s) at low AgNW area fractions and supplied voltages (0.5–5 V) and possess sufficient heating reliability, stability, and repeatability during the long-term and repeated heating and cooling cycles. Fully functional applications of the ANF/AgNW nanocomposite paper-based electrical heaters are demonstrated, indicating their excellent potential for emerging electronic applications such as wearable devices, artificial intelligence, and high-performance heating systems.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Ri Kim, H., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,136
Vosgueritchian, M., Lipomi, D. J., & Bao, Z. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101775 · Cited by 1,174
Dispersions of Aramid Nanofibers: A New Nanoscale Building Block
Yang, M., Cao, K., Sui, L., Qi, Y., Zhu, J., Waas, A., Arruda, E. M., Kieffer, J., Thouless, M. D., & Kotov, N. A. (2011) · ACS Nano · doi:10.1021/nn2014003 · Cited by 852
Highly Stretchable and Transparent Metal Nanowire Heater for Wearable Electronics Applications
Hong, S., Lee, H., Lee, J., Kwon, J., Han, S., Suh, Y. D., Cho, H., Shin, J., Yeo, J., & Ko, S. H. (2015) · Advanced Materials · doi:10.1002/adma.201500917 · Cited by 788
Chen, J., Huang, X., Sun, B., & Jiang, P. (2019) · ACS Nano · doi:10.1021/acsnano.8b06290 · Cited by 768
Choi, S., Park, J., Hyun, W., Kim, J., Kim, J., Lee, Y. B., Song, C., Hwang, H. J., Kim, J. H., Hyeon, T., et al. (2015) · ACS Nano · doi:10.1021/acsnano.5b02790 · Cited by 568
Personal Thermal Management by Metallic Nanowire-Coated Textile
Hsu, P.-C., Liu, X., Liu, C., Xie, X., Lee, H. R., Welch, A. J., Zhao, T., & Cui, Y. (2015) · Nano Letters · doi:10.1021/nl5036572 · Cited by 544
High-Performance Graphene-Based Transparent Flexible Heaters
Kang, J., Kim, H., Kim, K. S., Lee, S.-K., Bae, S., Ahn, J.-H., Kim, Y.-J., Choi, J.-B., & Hong, B. H. (2011) · Nano Letters · doi:10.1021/nl202311v · Cited by 539
Transparent Film Heater Using Single‐Walled Carbon Nanotubes
Yoon, Y. ‐., Song, J. ‐., Kim, D., Kim, J., Park, J. ‐., Oh, S. ‐., & Han, C. ‐. (2007) · Advanced Materials · doi:10.1002/adma.200701173 · Cited by 354
Performance enhancement of metal nanowire transparent conducting electrodes by mesoscale metal wires
Hsu, P.-C., Wang, S., Wu, H., Narasimhan, V. K., Kong, D., Ryoung Lee, H., & Cui, Y. (2013) · Nature Communications · doi:10.1038/ncomms3522 · Cited by 308
An, B. W., Gwak, E.-J., Kim, K., Kim, Y.-C., Jang, J., Kim, J.-Y., & Park, J.-U. (2016) · Nano Letters · doi:10.1021/acs.nanolett.5b04134 · Cited by 308
Highly flexible transparent film heaters based on random networks of silver nanowires
Celle, C., Mayousse, C., Moreau, E., Basti, H., Carella, A., & Simonato, J.-P. (2012) · Nano Research · doi:10.1007/s12274-012-0225-2 · Cited by 293
Heat Dissipation of Transparent Graphene Defoggers
Bae, J. J., Lim, S. C., Han, G. H., Jo, Y. W., Doung, D. L., Kim, E. S., Chae, S. J., Huy, T. Q., Van Luan, N., & Lee, Y. H. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201201155 · Cited by 293
Highly Efficient and Reliable Transparent Electromagnetic Interference Shielding Film
Jia, L.-C., Yan, D.-X., Liu, X., Ma, R., Wu, H.-Y., & Li, Z.-M. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b00492 · Cited by 293
Ma, Z., Wei, A., Ma, J., Shao, L., Jiang, H., Dong, D., Ji, Z., Wang, Q., & Kang, S. (2018) · Nanoscale · doi:10.1039/c8nr00004b · Cited by 278
Self-citationHuangfu, Y., Liang, C., Han, Y., Qiu, H., Song, P., Wang, L., Kong, J., & Gu, J. (2019) · Composites Science and Technology · doi:10.1016/j.compscitech.2018.11.012 · Cited by 261
Self-citationGupta, R., Rao, K. D. M., Kiruthika, S., & Kulkarni, G. U. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11026 · Cited by 256
Mechanically Strong Graphene/Aramid Nanofiber Composite Electrodes for Structural Energy and Power
Kwon, S. R., Harris, J., Zhou, T., Loufakis, D., Boyd, J. G., & Lutkenhaus, J. L. (2017) · ACS Nano · doi:10.1021/acsnano.7b00790 · Cited by 243
Multifunctional non-woven fabrics of interfused graphene fibres
Li, Z., Xu, Z., Liu, Y., Wang, R., & Gao, C. (2016) · Nature Communications · doi:10.1038/ncomms13684 · Cited by 235
Lan, W., Chen, Y., Yang, Z., Han, W., Zhou, J., Zhang, Y., Wang, J., Tang, G., Wei, Y., Dou, W., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16853 · Cited by 231
Ultrathin, Washable, and Large‐Area Graphene Papers for Personal Thermal Management
Guo, Y., Dun, C., Xu, J., Mu, J., Li, P., Gu, L., Hou, C., Hewitt, C. A., Zhang, Q., Li, Y., et al. (2017) · Small · doi:10.1002/smll.201702645 · Cited by 231
Guan, Y., Li, W., Zhang, Y., Shi, Z., Tan, J., Wang, F., & Wang, Y. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.03.010 · Cited by 230
Zhu, J., Yang, M., Emre, A., Bahng, J. H., Xu, L., Yeom, J., Yeom, B., Kim, Y., Johnson, K., Green, P., et al. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201703766 · Cited by 218
Cheng, Y., Zhang, H., Wang, R., Wang, X., Zhai, H., Wang, T., Jin, Q., & Sun, J. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b09293 · Cited by 187
Jang, J., Hyun, B. G., Ji, S., Cho, E., An, B. W., Cheong, W. H., & Park, J.-U. (2017) · NPG Asia Materials · doi:10.1038/am.2017.172 · Cited by 184
Soft electrothermal actuators using silver nanowire heaters
Yao, S., Cui, J., Cui, Z., & Zhu, Y. (2017) · Nanoscale · doi:10.1039/c6nr09270e · Cited by 174
Weft‐Knitted Fabric for a Highly Stretchable and Low‐Voltage Wearable Heater
Zhang, M., Wang, C., Liang, X., Yin, Z., Xia, K., Wang, H., Jian, M., & Zhang, Y. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201700193 · Cited by 171
Wang, R., Xu, Z., Zhuang, J., Liu, Z., Peng, L., Li, Z., Liu, Y., Gao, W., & Gao, C. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600425 · Cited by 164
Recent progress in silver nanowire based flexible/wearable optoelectronics
Kwon, J., Suh, Y. D., Lee, J., Lee, P., Han, S., Hong, S., Yeo, J., Lee, H., & Ko, S. H. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc01024b · Cited by 164
Guo, Y., Li, K., Hou, C., Li, Y., Zhang, Q., & Wang, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b11622 · Cited by 162
An, S., Jo, H. S., Kim, D., Lee, H. J., Ju, B., Al‐Deyab, S. S., Ahn, J., Qin, Y., Swihart, M. T., Yarin, A. L., et al. (2016) · Advanced Materials · doi:10.1002/adma.201506364 · Cited by 160
Jang, N.-S., Kim, K.-H., Ha, S.-H., Jung, S.-H., Lee, H. M., & Kim, J.-M. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b03474 · Cited by 159
Transforming Commercial Textiles and Threads into Sewable and Weavable Electric Heaters
Zhang, L., Baima, M., & Andrew, T. L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b10514 · Cited by 159
High Strength Conductive Composites with Plasmonic Nanoparticles Aligned on Aramid Nanofibers
Lyu, J., Wang, X., Liu, L., Kim, Y., Tanyi, E. K., Chi, H., Feng, W., Xu, L., Li, T., Noginov, M. A., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201603230 · Cited by 143
An Ag-grid/graphene hybrid structure for large-scale, transparent, flexible heaters
Kang, J., Jang, Y., Kim, Y., Cho, S.-H., Suhr, J., Hong, B. H., Choi, J., & Byun, D. (2015) · Nanoscale · doi:10.1039/c4nr06984f · Cited by 139
Li, H., Yuan, D., Li, P., & He, C. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.04.003 · Cited by 135
Zhou, R., Li, P., Fan, Z., Du, D., & Ouyang, J. (2017) · Journal of Materials Chemistry C · doi:10.1039/c6tc04849h · Cited by 132
Lee, J.-G., Lee, J., An, S., Kim, D.-Y., Kim, T.-G., Al-Deyab, S. S., Yarin, A. L., & Yoon, S. S. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta10997g · Cited by 127
Zhou, J. P., Mulle, M., Zhang, Y., Xu, X., Li, E. Q., Han, F., Thoroddsen, S. T., & Gilles Lubineau, A. (2016) · Journal of Materials Chemistry C · doi:10.1039/c5tc03380b · Cited by 122
A smart, stretchable resistive heater textile
Li, Y., Zhang, Z., Li, X., Zhang, J., Lou, H., Shi, X., Cheng, X., & Peng, H. (2016) · Journal of Materials Chemistry C · doi:10.1039/c6tc04399b · Cited by 107
Yang, B., Zhang, M., Lu, Z., Luo, J., Song, S., & Zhang, Q. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b01311 · Cited by 103
Self-citationHierarchical porous PANI/MIL-101 nanocomposites based solid-state flexible supercapacitor
Wang, Q., Shao, L., Ma, Z., Xu, J., Li, Y., & Wang, C. (2018) · Electrochimica Acta · doi:10.1016/j.electacta.2018.06.002 · Cited by 101
Self-citationAsymmetric Pentagonal Metal Meshes for Flexible Transparent Electrodes and Heaters
Lordan, D., Burke, M., Manning, M., et al. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b12995 · Cited by 94
Three-Dimensional Graphene Foam–Polymer Composite with Superior Deicing Efficiency and Strength
Bustillos, J., Zhang, C., Boesl, B., & Agarwal, A. K. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b18346 · Cited by 88
Highly stable copper wire/alumina/polyimide composite films for stretchable and transparent heaters
Li, P., Ma, J., Xu, H., Xue, X., & Liu, Y. (2016) · Journal of Materials Chemistry C · doi:10.1039/c5tc04276c · Cited by 78
Self-citationDong, D., Ma, J., Ma, Z., Chen, Y. M., Zhang, H., Shao, L., Gao, J., Wei, L., Wei, A., & Kang, S. (2019) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2019.05.019 · Cited by 74
Self-citationSilver nanowire decorated heatable textiles
Doğanay, D., Coşkun, Ş., Genlik, S. P., & Ünalan, H. E. (2016) · Nanotechnology · doi:10.1088/0957-4484/27/43/435201 · Cited by 72
Tian, S., He, P., Chen, L., Wang, H., Ding, G., & Xie, X. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b00567 · Cited by 69
Pyo, K.-H., & Kim, J. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.07.011 · Cited by 40
Cited by
Fabrication, Applications, and Prospects of Aramid Nanofiber
Yang, B., Wang, L., Zhang, M., Luo, J., Lu, Z., & Ding, X. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000186 · Cited by 484
Self-citationZeng, Z., Jiang, F., Yue, Y., Han, D., Lin, L., Zhao, S., Zhao, Y., Pan, Z., Li, C., Nyström, G., et al. (2020) · Advanced Materials · doi:10.1002/adma.201908496 · Cited by 336
MXene‐Reinforced Cellulose Nanofibril Inks for 3D‐Printed Smart Fibres and Textiles
Cao, W., Ma, C., Mao, D., Zhang, J., Ma, M., & Chen, F. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201905898 · Cited by 332
He, H., Liu, J., Wang, Y., Zhao, Y., Qin, Y., Zhu, Z., Yu, Z., & Wang, J. (2022) · ACS Nano · doi:10.1021/acsnano.1c10144 · Cited by 282
Metadata
- Authors
- Ma, Z., Kang, S., Ma, J., Shao, L., Wei, A., Liang, C., Gu, J., Yang, B., Dong, D., Wei, L., & Ji, Z.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-06-18
- Volume
- 13
- Issue
- 7
- Pages
- 7578-7590
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2950650854
- Cited by
- 450
- References
- 49
- FWCI
- 20.62
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.