The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Biomass-Based Activated Carbon and Activators: Preparation of Activated Carbon from Corncob by Chemical Activation with Biomass Pyrolysis Liquids
Open accessAbstract
Abstract Pyrolysis liquids are the main products in biomass pyrolysis, and the strong acidity limits its utilization. Likewise, activators are required in the process of preparing biomass-based activated carbon, and current activators are usually chemical agents and not sustainable. Both issues are addressed with the new concept of using acidic pyrolysis liquids as the activator of biomass-based activated carbon. In the present research, corncob-based activated carbon was prepared with phosphoric acid and pyrolysis liquids (bio-oil and wood vinegar) as activators. The effects of activation temperature and the types of activators on the structure and surface chemical properties of activated carbon were investigated. Results show that the adsorption performance and specific surface area of activated carbon prepared with bio-oil are not as good as that prepared with phosphoric acid and wood vinegar, but its yield is relatively high. Some alkali and earth alkaline metals remain on the activated carbon prepared by bio-oil and wood vinegar. At 450 °C, the surface area and pore volume of activated carbon prepared with bio-oil and wood vinegar were much smaller than the ones prepared with phosphoric acid. Increasing the activation temperature may improve the performance of activated carbon. The specific surface area of activated carbon prepared with wood vinegar as the activator can reach 384.35 m2/g at an activation temperature of 850 °C, which is slightly inferior to that prepared with phosphoric acid as the activator. However, the adsorption amount of methylene blue exceeds the activated carbon prepared with phosphoric acid. This shows that wood vinegar can be used as an activator to prepare biomass-based activated carbon to achieve sustainability of the entire preparation process of biomass-based activated carbon.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation and characterization of activated carbon from waste biomass
Tay, T., Ucar, S., & Karagöz, S. (2009) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2008.10.011 · Cited by 446
Fast pyrolysis of lignins with different molecular weight: Experiments and modelling
Marathe, P. S., Westerhof, R. J. M., & Kersten, S. R. A. (2019) · Applied Energy · doi:10.1016/j.apenergy.2018.12.058 · Cited by 71
Cited by
Activated carbon from biomass precursors using phosphoric acid: A review
Neme, I., Gonfa, G., & Masi, C. (2022) · Heliyon · doi:10.1016/j.heliyon.2022.e11940 · Cited by 311
Activation of biomass-derived porous carbon for supercapacitors: A review
Guo, Z., Han, X., Zhang, C., He, S., Liu, K., Hu, J., Yang, W., Jian, S., Jiang, S., & Duan, G. (2024) · Chinese Chemical Letters · doi:10.1016/j.cclet.2023.109007 · Cited by 261
Kumar Mishra, R., Singh, B., & Acharya, B. (2024) · Carbon Resources Conversion · doi:10.1016/j.crcon.2024.100228 · Cited by 132
Ali, A. E., Chowdhury, Z. Z., Devnath, R., Ahmed, M. M., Rahman, M. M., Khalid, K., Wahab, Y. A., Badruddin, I. A., Kamangar, S., Hussien, M., et al. (2023) · Separations · doi:10.3390/separations10090506 · Cited by 60
Metadata
- Authors
- Feng, P., Li, J., Wang, H., & Xu, Z.
- Venue
- ACS Omega
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-09-09
- Volume
- 5
- Issue
- 37
- Pages
- 24064-24072
- ISSN
- 2470-1343 (ISSN-L)
- OpenAlex
- W3084404412
- Cited by
- 208
- References
- 2
- FWCI
- 7.08
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.