CoChat

The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.

Thermogravimetric and Kinetic Analysis of Co-Combustion of Waste Tires and Coal Blends

Open access
Pan, Dan-lu, Jiang, Wei-ting, Guo, Rui-tang, Huang, Yang, Pan, Wei-guo · 2021 · ACS Omega

Abstract

The waste tire is a fuel with the potential to partially replace coal due to the high heat value. In the present study, the combustion characteristics of the tire powders, bituminous coal, and their blends were examined using the thermogravimetric analyzer. The influence of heating rate on tire powders combustion and the burnout characteristics of their blends were studied. The increase of the heating rate caused the combustion temperature of the tire powders to become high but reduced the maximum weight loss rate. The combustion characteristics of the blends of coal and tire powders approached the combination of those of the individual sample, suggesting that the interaction effects between coal and tire powders were slight. Furthermore, the influence of different ratios on ignition characteristics, burnout temperature, and combustion effect of the blends was studied at the optimal combustion rate. The addition of tire powders improved the ignition characteristics, reduced the burnout temperature and increased the burnout rate of coal to a certain extent. An increase in the proportion of tire powders led to a decrease in the activation energy in the temperature range of 349-465 °C, whereas it caused an increase from 465 °C to burnout, which could be attributed to the fact that the volatile matter was more combustible than fixed carbon within 349-465 °C, and the combustion effect of fixed carbon in the tire powders gradually manifested in the combustion from 465 °C to burnout when the tire powders content increased.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acsomega.0c05768

Cites

31 of 31 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 TGA and DTG curves of (a) coal (b) tire powders.
Figure 1 TGA and DTG curves of (a) coal (b) tire powders.CC BY-NC-ND · PubMed Central
Figure 2 TGA curves of tire powders at different heating rates.
Figure 2 TGA curves of tire powders at different heating rates.CC BY-NC-ND · PubMed Central
Figure 3 DTG curves of tire powders at different heating rates.
Figure 3 DTG curves of tire powders at different heating rates.CC BY-NC-ND · PubMed Central
Figure 4 TGA curves of different proportions of blends.
Figure 4 TGA curves of different proportions of blends.CC BY-NC-ND · PubMed Central
Figure 5 TGA curves of different proportions of blends.
Figure 5 TGA curves of different proportions of blends.CC BY-NC-ND · PubMed Central
Figure 6 Linear regression for the extraction of the kinetic parameters of the sample of 40 wt % tire + 60 wt % coal at (a) temperature range of 371–465 °C and (b) temperature range of 465–580 °C.
Figure 6 Linear regression for the extraction of the kinetic parameters of the sample of 40 wt % tire + 60 wt % coal at (a) temperature range of 371–465 °C and (b) temperature range of 465–580 °C.CC BY-NC-ND · PubMed Central
Figure 7 Ignition point (Ti) definition diagram.
Figure 7 Ignition point (Ti) definition diagram.CC BY-NC-ND · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 31 references

Research works printed but not linked: 8

  1. Klingensmith W., 1998, Rubber World, 4, 41
  2. Mennig G., 1998, Plast., Rubber Compos. Process. Appl., 27, 346
  3. Gronowicz J., 2007, Probl. Eksploat., 2, 5
  4. Marks J., 1991, Power Eng., 8, 35
  5. Jones R. M., 1990, Tappi, 5, 107
  6. Sun R., 2016, Chin. J. Process Eng., 16, 966
  7. Gu X. H., 2017, Coal Chem. Ind., 45, 66
  8. Sui Y., 2017, China Rubber/Plast. Technol. Equip., 43, 39

Cited by

See all 32

Metadata

Authors
Pan, D.-L., Jiang, W.-T., Guo, R.-T., Huang, Y., & Pan, W.-G.
Affiliations
  • Shanghai University of Electric Power (CN)
  • College of Energy and Mechanical Engineering, Shanghai University of Electric Power, Shanghai 200090, China
Corresponding author
Guo, Rui-tang
Venue
ACS Omega
Published
2021-02-15
Volume
6
Issue
8
Pages
5479-5484
ISSN
2470-1343 (ISSN-L)
OpenAlex
W3130156392
Cited by
32
References
31
Citations by year
2026: 4 · 2025: 5 · 2024: 7 · 2023: 6 · 2022: 8 · 2021: 2
FWCI
1.75
Type
journal article
Language
en
Open access
Locations
  • ACS Omega (publishedVersion, cc-by-nc-nd)
  • PubMed Central (publishedVersion, cc-by-nc-nd)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • Science and Technology Commission of Shanghai Municipality (18DZ1202502, 19020500900)
  • National Natural Science Foundation of China (21546014)
Topics
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
  • Physical Sciences › Engineering › Mechanical Engineering › Coal Combustion and Slurry Processing
Keywords
coal blends, bituminous coal, combustion kinetics, activation energy, burnout temperature, heating rate effects, volatile matter, fixed carbon, ignition characteristics

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Thermogravimetric and Kinetic Analysis of Co-Combustion of Waste Tires and Coal Blends. https://app.cochat.ai/papers/10.1021/acsomega.0c05768
The paper
Pan, D.-L., Jiang, W.-T., Guo, R.-T., Huang, Y., & Pan, W.-G. (2021). Thermogravimetric and Kinetic Analysis of Co-Combustion of Waste Tires and Coal Blends. ACS Omega. https://doi.org/10.1021/acsomega.0c05768

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.