Value-Added Bio-carbon Production through the Slow Pyrolysis of Waste Bio-oil: Fundamental Studies on Their Structure–Property–Processing Co-relation
Open accessThe DOI matches its Crossref record; 11 of the 11 references it cites were found in a registry or an index.
Abstract
High Resolution Image Download MS PowerPoint Slide The present work addresses the transformation of bio-oil into valuable biocarbon through slow pyrolysis. The biocarbons produced at three different temperatures (400, 600, and 900 °C), 10 °C min –1 heating rate, and 30 min holding time were tested for their surface morphology, thermal stability, elemental composition, functionality, particle size, and thermal and electrical conductivity. The physicochemical study of bio-oil showed substantial carbon content, higher heating value, and lower nitrogen content. Also, the Thermogravimetric analyzer–FourierTransform Infrared Spectroscopy (TGA-FTIR) study of bio-oil confirmed that the majority of gases released were hydrocarbons, carbonyl products, ethers, CO, and CO 2, with a minor percentage of water and alcohol. Overall, it was found that the pyrolysis temperature has the dominant role in the yield and properties of biocarbon. The physicochemical characterization of biocarbon showed that the higher temperature based pyrolyzed biocarbon (600 and 900 °C) improved the properties in terms of thermal stability, thermal conductivity, graphitic content, ash content, and carbon content. Furthermore, the elemental and Energy-Dispersive Spectroscopy study of biocarbon confirmed the substantial depletion in oxygen and hydrogen at a higher temperature (600 and 900 °C) than the lower temperature based pyrolyzed biocarbon (400 °C). Additionally, the purest form of the biocarbon is found at a higher temperature (900 °C) with higher thermal stability and carbon content. The study of the surface morphology of biocarbon revealed that the higher temperature (600 and 900 °C) biocarbon showed larger and harder particles than the lower temperature biocarbon (400 °C); however, the electrical conductivity of biocarbon decreased, whereas thermal conductivity increased, with an increase in the pyrolysis temperatures. Moreover, the particle size analysis of biocarbon confirmed that most of the particles were found in the range of 1 μm. The increased thermal stability, carbon content, and graphitic content and the lower ash content endorse biocarbon as an excellent feedstock for carbon-based energy storage materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation, modification and environmental application of biochar: A review
Wang, J., & Wang, S. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.282 · Cited by 2,345
Development of biochar-based functional materials: toward a sustainable platform carbon material
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00195 · Cited by 1,754
Bio-oil production and upgrading research: A review
Xiu, S., & Shahbazi, A. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.04.028 · Cited by 1,127
A review on operating parameters for optimum liquid oil yield in biomass pyrolysis
Akhtar, J., & Saidina Amin, N. (2012) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2012.05.033 · Cited by 692
Zhao, S.-X., Ta, N., & Wang, X.-D. (2017) · Energies · doi:10.3390/en10091293 · Cited by 585
Physical and chemical characterization of waste wood derived biochars
Yargicoglu, E. N., Sadasivam, B. Y., Reddy, K. R., & Spokas, K. (2015) · Waste Management · doi:10.1016/j.wasman.2014.10.029 · Cited by 443
Rafiq, M. K., Bachmann, R. T., Rafiq, M. T., Shang, Z., Joseph, S., & Long, R. (2016) · PLOS ONE · doi:10.1371/journal.pone.0156894 · Cited by 376
Production of bio-oil from fixed bed pyrolysis of bagasse
Asadullah, M., Rahman, M. A., Ali, M. M., Rahman, M. S., Motin, M. A., Sultan, M. B., & Alam, M. R. (2007) · Fuel · doi:10.1016/j.fuel.2007.02.007 · Cited by 292
Mimmo, T., Panzacchi, P., Baratieri, M., Davies, C. A., & Tonon, G. (2014) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2014.01.004 · Cited by 240 · cited 1×
“Similar findings of the decomposition of biocarbon derived at different temperatures were also reported by Mimmo et al. (2014)54 and Arnold et al. (2018).20 Overall, the biocarbon derived at higher temperature showed a lower mass loss with respect to temperature, which possess more than the stable…”
ResultIdris, J., Shirai, Y., Anduo, Y., Ali, A. A. M., Othman, M. R., Ibrahim, I., Husen, R., & Hassan, M. A. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.05.023 · Cited by 53
Combustion of Miscanthus: Composition of the Ash by Particle Size
Lanzerstorfer, C. (2019) · Energies · doi:10.3390/en12010178 · Cited by 25
Cited by
Trivedi, Y., Sharma, M., Mishra, R. K., Sharma, A., Joshi, J., Gupta, A. B., Achintya, B., Shah, K., & Vuppaladadiyamd, A. K. (2025) · Desalination · doi:10.1016/j.desal.2024.118509 · Cited by 152
Self-citationKumar Mishra, R., Singh, B., & Acharya, B. (2024) · Carbon Resources Conversion · doi:10.1016/j.crcon.2024.100228 · Cited by 132
Sarkar, D., Panicker, T. F., Kumar Mishra, R., & Srinivas Kini, M. (2024) · Water-Energy Nexus · doi:10.1016/j.wen.2024.11.001 · Cited by 50
Metadata
- Authors
- Mishra, R. K., Misra, M., & Mohanty, A. K.
- Venue
- ACS Omega
- Publisher
- American Chemical Society (ACS)
- Published
- 2022-01-06
- Volume
- 7
- Issue
- 2
- Pages
- 1612-1627
- ISSN
- 2470-1343 (ISSN-L)
- OpenAlex
- W4205788142
- Cited by
- 50
- References
- 11
- FWCI
- 2.36
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.