The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
Importance of Electrode Preparation Methodologies in Supercapacitor Applications
Open accessAbstract
Abstract The work reported here aims toward the optimization of electrode preparation methodologies for superior performance of supercapacitors through a rigorous understanding of underlying physical parameters. Oxygen-functionalized few-layer graphene was employed as an active material while binders [Nafion, polyvinylidene fluoride (PVDF), and polytetrafluoroethylene], solvents for active material dispersion [ethylene glycol and N-methyl-2-pyrrolidone (NMP)], and electrode-drying temperatures (100, 170, and 190 °C) were varied. Maximum specific capacitances at different electrode preparation conditions ranged from 240 to 318 F g–1 at 1 mV s–1 scan rate of cyclic voltammetry for the same active material. The study revealed that the electrodes prepared using the PVDF binder, the NMP solvent for active material dispersion, 170 °C electrode-drying temperature (slightly below the boiling temperature of the solvent) provided the best electrochemical performance. Electrochemical impedance spectroscopy revealed that the resistance for electron transfer at the electrode/electrolyte interface can be minimized while mass transport and pseudocapacitive charging can be improved significantly by tuning electrode preparation methodologies which resulted in smaller time constants and hence better capacitor performances. Scanning electron microscopy images revealed that graphene layers were properly stacked much similar to the synthesized nanomaterial wherein better electrochemical performances were achieved, avoiding the agglomeration of nanomaterials on the electrode surface. Low viscosity of the solvent for active material dispersion and better solubility of the binder in the solvent helped to reduce the agglomeration of nanomaterials by minimizing the strong van der Waals interaction which causes agglomeration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Carbon-based materials as supercapacitor electrodes
Zhang, L. L., & Zhao, X. S. (2009) · Chemical Society Reviews · doi:10.1039/b813846j · Cited by 7,459
What are batteries, fuel cells, and supercapacitors?
Winter, M., & Brodd, R. J. (2004) · Chemical Reviews · doi:10.1021/cr020730k · Cited by 7,389
Where do batteries end and supercapacitors begin?
Simon, P., Gogotsi, Y., & Dunn, B. (2014) · Science · doi:10.1126/science.1249625 · Cited by 5,634
Electrochemical Supercapacitors : Scientific Fundamentals and Technological Applications
Conway, B. E. (2013) · CERN Document Server (European Organization for Nuclear Research) · Cited by 5,015
Carbon materials for the electrochemical storage of energy in capacitors
Frackowiak, E., & Béguin, F. (2001) · Carbon · doi:10.1016/s0008-6223(00)00183-4 · Cited by 4,523
Electrochemical Supercapacitors
Conway, B. E. (1999) · Springer eBooks · doi:10.1007/978-1-4757-3058-6 · Cited by 3,519
Graphene-Based Supercapacitor with an Ultrahigh Energy Density
Liu, C., Yu, Z., Neff, D., Zhamu, A., & Jang, B. Z. (2010) · Nano Letters · doi:10.1021/nl102661q · Cited by 3,207
Conductive MOF electrodes for stable supercapacitors with high areal capacitance
Sheberla, D., Bachman, J. C., Elias, J. S., Sun, C.-J., Shao-Horn, Y., & Dincă, M. (2017) · Nature Materials · doi:10.1038/nmat4766 · Cited by 2,370
Transition from “Supercapacitor” to “Battery” Behavior in Electrochemical Energy Storage
Conway, B. E. (1991) · Journal of The Electrochemical Society · doi:10.1149/1.2085829 · Cited by 2,339
Cited by
Costa, C. M., Cardoso, V. F., Martins, P., Correia, D. M., Gonçalves, R., Costa, P., Correia, V., Ribeiro, C., Fernandes, M. M., Martins, P. M., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00196 · Cited by 498
The Many Deaths of Supercapacitors: Degradation, Aging, and Performance Fading
Pameté, E., Köps, L., Kreth, F. A., Pohlmann, S., Varzi, A., Brousse, T., Balducci, A., & Presser, V. (2023) · Advanced Energy Materials · doi:10.1002/aenm.202301008 · Cited by 328
Elessawy, N. A., El Nady, J., Wazeer, W., & Kashyout, A. B. (2019) · Scientific Reports · doi:10.1038/s41598-018-37369-x · Cited by 163
Metadata
- Authors
- M., A., & Paul, A.
- Venue
- ACS Omega
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-11-16
- Volume
- 2
- Issue
- 11
- Pages
- 8039-8050
- ISSN
- 2470-1343 (ISSN-L)
- OpenAlex
- W2768306409
- Cited by
- 259
- References
- 31
- FWCI
- 3.73
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Importance of Electrode Preparation Methodologies in Supercapacitor Applications. https://app.cochat.ai/papers/10.1021/acsomega.7b01275
- The paper
- M., A., & Paul, A. (2017). Importance of Electrode Preparation Methodologies in Supercapacitor Applications. ACS Omega. https://doi.org/10.1021/acsomega.7b01275
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.