Facile Ball-Milling Synthesis of CuO/Biochar Nanocomposites for Efficient Removal of Reactive Red 120
Open accessThe DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Abstract With the goal of improving the removal of anionic contaminants, copper oxide (CuO)-modified biochar (BC) nanocomposites were successfully prepared through simply ball milling CuO particles with BC. The physicochemical properties of the fabricated CuO/BC nanocomposites were systematically characterized by a series of techniques; their adsorption performances were assessed, and the main adsorption mechanism was revealed. X-ray powder diffraction, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy analyses of the nanocomposites showed the strong interaction between CuO and BC and confirmed the success of the ball-milling syntheses. Because of strong electrostatic attraction between the embedded CuO nanoparticles and reactive red (RR120), the composited adsorbents exhibited excellent RR120 removal. The 10%-CuO/BC nanocomposite achieved the best RR120 removal efficiency (46%), which is much higher than that of pristine BC (20%). In addition, the adsorption was insensitive to the change of solution initial pH (4–10). The 10%-CuO/BC also showed fast adsorption kinetics (equilibrium time < 3 h) and extremely high adsorption capacity (Langmuir maximum capacity of 1399 mg g–1) to RR120 in aqueous solutions. Findings from this study demonstrate not only the strong feasibility of ball-milling synthesis of BC-based nanocomposites but also the promising potential of the CuO/BC nanocomposites to remove aqueous anionic contaminants.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Development of biochar-based functional materials: toward a sustainable platform carbon material
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00195 · Cited by 1,754
Rajapaksha, A. U., Chen, S. S., Tsang, D. C. W., Zhang, M., Vithanage, M., Mandal, S., Gao, B., Bolan, N. S., & Ok, Y. S. (2016) · Chemosphere · doi:10.1016/j.chemosphere.2016.01.043 · Cited by 1,322
Self-citationAhmed, M. B., Zhou, J. L., Ngo, H. H., Guo, W., & Chen, M. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.05.057 · Cited by 843
Zhang, M., Gao, B., Yao, Y., Xue, Y., & Inyang, M. (2012) · Chemical Engineering Journal · doi:10.1016/j.cej.2012.08.052 · Cited by 699
Self-citationAdsorption removal of natural organic matters in waters using biochar
Lee, D.-J., Cheng, Y.-L., Wong, R.-J., & Wang, X.-D. (2018) · Bioresource Technology · doi:10.1016/j.biortech.2018.04.016 · Cited by 78
Self-citation
Cited by
Abid, N., Khan, A. M., Shujait, S., Chaudhary, K., Ikram, M., Imran, M., Haider, J., Khan, M., Khan, Q., & Maqbool, M. (2022) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2021.102597 · Cited by 1,271
Ball milling as a mechanochemical technology for fabrication of novel biochar nanomaterials
Kumar, M., Xiong, X., Wan, Z., Sun, Y., Tsang, D. C. W., Gupta, J., Gao, B., Cao, X., Tang, J., & Ok, Y. S. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123613 · Cited by 561
Self-citationAmusat, S. O., Kebede, T. G., Dube, S., & Nindi, M. M. (2021) · Journal of Water Process Engineering · doi:10.1016/j.jwpe.2021.101993 · Cited by 323
Yu, F., Tian, F., Zou, H., Ye, Z., Peng, C., Huang, J., Zheng, Y., Zhang, Y., Yang, Y., Wei, X., et al. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2021.125511 · Cited by 322
Self-citationFauzi, A. A., Jalil, A. A., Hassan, N. S., Aziz, F. F. A., Azami, M. S., Hussain, I., Saravanan, R., & Vo, D.-V. N. (2022) · Chemosphere · doi:10.1016/j.chemosphere.2021.131651 · Cited by 307
Metadata
- Authors
- Wei, X., Wang, X., Gao, B., Zou, W., & Dong, L.
- Venue
- ACS Omega
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-03-11
- Volume
- 5
- Issue
- 11
- Pages
- 5748-5755
- ISSN
- 2470-1343 (ISSN-L)
- OpenAlex
- W3012367332
- Cited by
- 151
- References
- 5
- FWCI
- 5.49
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.