The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Current Understanding of the Fundamental Mechanisms of Doped and Loaded Semiconducting Metal-Oxide-Based Gas Sensing Materials
Abstract
Introducing additives in semiconducting metal oxides includes, besides the use of filters, dynamic operation procedures and chemometric approaches, the most common way of tuning the sensitivity, selectivity, and stability of chemoresitsive gas sensors. For the vast majority of commercially used gas sensing materials, the introduction of additives is essential and is one of the longest lasting topics in gas sensor research. This Review discusses the different chemical and electrical sensitization mechanisms of additives as well as the role of different structures. Based on state-of-the-art experimental findings, this Review revises and updates the concepts that are used to explain the mechanisms through which the additives influence the performance of typical gas sensing materials, i.e., oxide nanoparticles arranged in a porous layer. The first sections classify the different additive structures, namely, doped or loaded oxides as well as mixtures of oxides, and describe the basic working principle of pristine semiconducting metal oxide gas sensors. The subsequent sections discuss different chemical and/or electrical contributions to the sensitization by additive structures, their mutual influence on each other, and the way they impact the sensing properties. The presented concepts and models are essential for understanding the complex role of additives and provide the basis for a knowledge-based design of gas sensors based on semiconducting metal oxide nanoparticles, which is outlined in a separate section.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Single-Atom Catalysts: A New Frontier in Heterogeneous Catalysis
Yang, X.-F., Wang, A., Qiao, B., Li, J., Liu, J., & Zhang, T. (2013) · Accounts of Chemical Research · doi:10.1021/ar300361m · Cited by 4,770
Conduction Model of Metal Oxide Gas Sensors
Barsan, N., & Weimar, U. (2001) · Journal of Electroceramics · doi:10.1023/a:1014405811371 · Cited by 2,721
Self-citationBand Bending in Semiconductors: Chemical and Physical Consequences at Surfaces and Interfaces
Zhang, Z., & Yates, J. T. (2012) · Chemical Reviews · doi:10.1021/cr3000626 · Cited by 2,594
Highly sensitive and selective gas sensors using p-type oxide semiconductors: Overview
Kim, H.-J., & Lee, J.-H. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2013.11.005 · Cited by 2,258
Thermally stable single-atom platinum-on-ceria catalysts via atom trapping
Jones, J., Xiong, H., DeLaRiva, A. T., Peterson, E. J., Pham, H., Challa, S. R., Qi, G., Oh, S., Wiebenga, M. H., Pereira Hernández, X. I., et al. (2016) · Science · doi:10.1126/science.aaf8800 · Cited by 2,044
Nanoscale metal oxide-based heterojunctions for gas sensing: A review
Miller, D. R., Akbar, S. A., & Morris, P. A. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2014.07.074 · Cited by 1,852
New approaches for improving semiconductor gas sensors
Yamazoe, N. (1991) · Sensors and Actuators B: Chemical · doi:10.1016/0925-4005(91)80213-4 · Cited by 1,796
Metal oxide-based gas sensor research: How to?
BARSAN, N., KOZIEJ, D., & WEIMAR, U. (2007) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2006.09.047 · Cited by 1,696
Self-citationGas sensors using hierarchical and hollow oxide nanostructures: Overview
Lee, J.-H. (2009) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2009.04.026 · Cited by 1,493
Control of Metal Nanocrystal Size Reveals Metal-Support Interface Role for Ceria Catalysts
Cargnello, M., Doan-Nguyen, V. V. T., Gordon, T. R., Diaz, R. E., Stach, E. A., Gorte, R. J., Fornasiero, P., & Murray, C. B. (2013) · Science · doi:10.1126/science.1240148 · Cited by 1,412
Cited by
Selectivity in Chemiresistive Gas Sensors: Strategies and Challenges
Bulemo, P. M., Kim, D.-H., Shin, H., Cho, H.-J., Koo, W.-T., Choi, S.-J., Park, C., Ahn, J., Güntner, A. T., Penner, R. M., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00592 · Cited by 418
Jeong, S., Kim, J., & Lee, J. (2020) · Advanced Materials · doi:10.1002/adma.202002075 · Cited by 415
Porous materials as effective chemiresistive gas sensors
Sharma, A., Eadi, S. B., Noothalapati, H., Otyepka, M., Lee, H.-D., & Jayaramulu, K. (2024) · Chemical Society Reviews · doi:10.1039/d2cs00761d · Cited by 352
Zhou, T., & Zhang, T. (2021) · Small Methods · doi:10.1002/smtd.202100515 · Cited by 350
Electrospinning and Nanofiber Technology: Fundamentals, Innovations, and Applications
Cho, Y., Baek, J. W., Sagong, M., Ahn, S., Nam, J. S., & Kim, I. (2025) · Advanced Materials · doi:10.1002/adma.202500162 · Cited by 334
Metadata
- Authors
- Degler, D., Weimar, U., & Barsan, N.
- Venue
- ACS Sensors
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-07-31
- Volume
- 4
- Issue
- 9
- Pages
- 2228-2249
- ISSN
- 2379-3694 (ISSN-L)
- OpenAlex
- W2964813318
- Cited by
- 519
- References
- 59
- FWCI
- 17.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Current Understanding of the Fundamental Mechanisms of Doped and Loaded Semiconducting Metal-Oxide-Based Gas Sensing Materials. https://app.cochat.ai/papers/10.1021/acssensors.9b00975
- The paper
- Degler, D., Weimar, U., & Barsan, N. (2019). Current Understanding of the Fundamental Mechanisms of Doped and Loaded Semiconducting Metal-Oxide-Based Gas Sensing Materials. ACS Sensors. https://doi.org/10.1021/acssensors.9b00975
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.