The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
Current Understanding of the Fundamental Mechanisms of Doped and Loaded Semiconducting Metal-Oxide-Based Gas Sensing Materials
Abstract
Introducing additives in semiconducting metal oxides includes, besides the use of filters, dynamic operation procedures and chemometric approaches, the most common way of tuning the sensitivity, selectivity, and stability of chemoresitsive gas sensors. For the vast majority of commercially used gas sensing materials, the introduction of additives is essential and is one of the longest lasting topics in gas sensor research. This Review discusses the different chemical and electrical sensitization mechanisms of additives as well as the role of different structures. Based on state-of-the-art experimental findings, this Review revises and updates the concepts that are used to explain the mechanisms through which the additives influence the performance of typical gas sensing materials, i.e., oxide nanoparticles arranged in a porous layer. The first sections classify the different additive structures, namely, doped or loaded oxides as well as mixtures of oxides, and describe the basic working principle of pristine semiconducting metal oxide gas sensors. The subsequent sections discuss different chemical and/or electrical contributions to the sensitization by additive structures, their mutual influence on each other, and the way they impact the sensing properties. The presented concepts and models are essential for understanding the complex role of additives and provide the basis for a knowledge-based design of gas sensors based on semiconducting metal oxide nanoparticles, which is outlined in a separate section.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Single-Atom Catalysts: A New Frontier in Heterogeneous Catalysis
Yang, X.-F., Wang, A., Qiao, B., Li, J., Liu, J., & Zhang, T. (2013) · Accounts of Chemical Research · doi:10.1021/ar300361m · Cited by 4,770
Conduction Model of Metal Oxide Gas Sensors
Barsan, N., & Weimar, U. (2001) · Journal of Electroceramics · doi:10.1023/a:1014405811371 · Cited by 2,721
Self-citationBand Bending in Semiconductors: Chemical and Physical Consequences at Surfaces and Interfaces
Zhang, Z., & Yates, J. T. (2012) · Chemical Reviews · doi:10.1021/cr3000626 · Cited by 2,594
Highly sensitive and selective gas sensors using p-type oxide semiconductors: Overview
Kim, H.-J., & Lee, J.-H. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2013.11.005 · Cited by 2,258
Thermally stable single-atom platinum-on-ceria catalysts via atom trapping
Jones, J., Xiong, H., DeLaRiva, A. T., Peterson, E. J., Pham, H., Challa, S. R., Qi, G., Oh, S., Wiebenga, M. H., Pereira Hernández, X. I., et al. (2016) · Science · doi:10.1126/science.aaf8800 · Cited by 2,044
Nanoscale metal oxide-based heterojunctions for gas sensing: A review
Miller, D. R., Akbar, S. A., & Morris, P. A. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2014.07.074 · Cited by 1,852
New approaches for improving semiconductor gas sensors
Yamazoe, N. (1991) · Sensors and Actuators B: Chemical · doi:10.1016/0925-4005(91)80213-4 · Cited by 1,796
Metal oxide-based gas sensor research: How to?
BARSAN, N., KOZIEJ, D., & WEIMAR, U. (2007) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2006.09.047 · Cited by 1,696
Self-citationGas sensors using hierarchical and hollow oxide nanostructures: Overview
Lee, J.-H. (2009) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2009.04.026 · Cited by 1,493
Control of Metal Nanocrystal Size Reveals Metal-Support Interface Role for Ceria Catalysts
Cargnello, M., Doan-Nguyen, V. V. T., Gordon, T. R., Diaz, R. E., Stach, E. A., Gorte, R. J., Fornasiero, P., & Murray, C. B. (2013) · Science · doi:10.1126/science.1240148 · Cited by 1,412
Metal and Metal Oxide Nanoparticles in Chemiresistors: Does the Nanoscale Matter?
Franke, M. E., Koplin, T., & Simon, U. (2005) · Small · doi:10.1002/smll.200500261 · Cited by 1,376
Catalysis by Supported Single Metal Atoms
Liu, J. (2017) · ACS Catalysis · doi:10.1021/acscatal.6b01534 · Cited by 1,331
Oxide Semiconductor Gas Sensors
Yamazoe, N., Sakai, G., & Shimanoe, K. (2003) · Catalysis Surveys from Asia · doi:10.1023/a:1023436725457 · Cited by 1,291
Metal and Metal Oxide Nanoparticles in Chemiresistors: Does the Nanoscale Matter?
Franke, M. E., Koplin, T., & Simon, U. (2006) · Small · doi:10.1002/smll.200690010 · Cited by 1,056
Transition Metal Oxide Work Functions: The Influence of Cation Oxidation State and Oxygen Vacancies
Greiner, M. T., Chai, L., Helander, M. G., Tang, W., & Lu, Z. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201200615 · Cited by 924
Effects of additives on semiconductor gas sensors
Yamazoe, N., Kurokawa, Y., & Seiyama, T. (1983) · Sensors and Actuators · doi:10.1016/0250-6874(83)85034-3 · Cited by 715
Chemical sensors: definitions and classification
Hulanicki, A., Glab, S., & Ingman, F. (1991) · Pure and Applied Chemistry · doi:10.1351/pac199163091247 · Cited by 680
Moses-DeBusk, M., Yoon, M., Allard, L. F., Mullins, D. R., Wu, Z., Yang, X., Veith, G., Stocks, G. M., & Narula, C. K. (2013) · Journal of the American Chemical Society · doi:10.1021/ja401847c · Cited by 602
Synergistic effects in gas sensing semiconducting oxide nano-heterostructures: A review
Walker, J. M., Akbar, S. A., & Morris, P. A. (2019) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2019.01.049 · Cited by 602
Influence of humidity on CO sensing with p-type CuO thick film gas sensors
Hübner, M., Simion, C. E., Tomescu-Stănoiu, A., Pokhrel, S., Bârsan, N., & Weimar, U. (2011) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2010.10.046 · Cited by 580
Self-citationMetal oxide composites in conductometric gas sensors: Achievements and challenges
Korotcenkov, G., & Cho, B. K. (2017) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2016.12.117 · Cited by 547
Laidler, K. J. (1996) · Pure and Applied Chemistry · doi:10.1351/pac199668010149 · Cited by 545
Morrison, S. R. (1981) · Sensors and Actuators · doi:10.1016/0250-6874(81)80054-6 · Cited by 538
Bañares, M. A. (2005) · Catalysis Today · doi:10.1016/j.cattod.2004.12.017 · Cited by 470
Reactant-Promoted Reaction Mechanism for Water-Gas Shift Reaction on Rh-Doped CeO2
Shido, T., & Iwasawa, Y. (1993) · Journal of Catalysis · doi:10.1006/jcat.1993.1119 · Cited by 450
Modeling of sensing and transduction for p-type semiconducting metal oxide based gas sensors
Bârsan, N., Simion, C. E., Heine, T., Pokhrel, S., & Weimar, U. (2009) · Journal of Electroceramics · doi:10.1007/s10832-009-9583-x · Cited by 422
Self-citationIn Situ and Operando Spectroscopy for Assessing Mechanisms of Gas Sensing
Gurlo, A., & Riedel, R. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200602597 · Cited by 411
Ramgir, N. S., Yang, Y., & Zacharias, M. (2010) · Small · doi:10.1002/smll.201000972 · Cited by 383
“Metal oxide -based heterostructures for gas sensors”- A review
Zappa, D., Galstyan, V., Kaur, N., Munasinghe Arachchige, H. M. M., Sisman, O., & Comini, E. (2018) · Analytica Chimica Acta · doi:10.1016/j.aca.2018.09.020 · Cited by 371
Determining the active site in a catalytic process: Operando spectroscopy is more than a buzzword
Weckhuysen, B. M. (2003) · Physical Chemistry Chemical Physics · doi:10.1039/b309650p · Cited by 359
Advances and new directions in gas-sensing devices
Kim, I.-D., Rothschild, A., & Tuller, H. L. (2013) · Acta Materialia · doi:10.1016/j.actamat.2012.10.041 · Cited by 343
Progress in the development of semiconducting metal oxide gas sensors: a review
Moseley, P. T. (2017) · Measurement Science and Technology · doi:10.1088/1361-6501/aa7443 · Cited by 327
Cabot, A., Arbiol, J., Morante, J. R., Weimar, U., Bârsan, N., & Göpel†, W. (2000) · Sensors and Actuators B Chemical · doi:10.1016/s0925-4005(00)00565-7 · Cited by 303
Self-citationInterface-Confined Oxide Nanostructures for Catalytic Oxidation Reactions
Fu, Q., Yang, F., & Bao, X. (2013) · Accounts of Chemical Research · doi:10.1021/ar300249b · Cited by 281
Ke, J., Zhu, W., Jiang, Y., Si, R., Wang, Y.-J., Li, S.-C., Jin, C., Liu, H., Song, W.-G., Yan, C.-H., et al. (2015) · ACS Catalysis · doi:10.1021/acscatal.5b00832 · Cited by 269
Catalytically Active and Spectator Ce3+ in Ceria‐Supported Metal Catalysts
Kopelent, R., van Bokhoven, J. A., Szlachetko, J., Edebeli, J., Paun, C., Nachtegaal, M., & Safonova, O. V. (2015) · Angewandte Chemie International Edition · doi:10.1002/anie.201503022 · Cited by 216
Bârsan, N., Hübner, M., & Weimar, U. (2011) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2011.05.011 · Cited by 202
Self-citationRockenberger, J., zum Felde, U., Tischer, M., Tröger, L., Haase, M., & Weller, H. (2000) · The Journal of Chemical Physics · doi:10.1063/1.480975 · Cited by 189
Jaaniso, R., & Tan, O. K. (2013) · Woodhead Publishing Limited eBooks · doi:10.1533/9780857098665 · Cited by 181
Metal oxide nanowires for chemiresistive gas sensors: Issues, challenges and prospects
Ramgir, N., Datta, N., Kaur, M., Kailasaganapathi, S., Debnath, A. K., Aswal, D. K., & Gupta, S. K. (2013) · Colloids and Surfaces A: Physicochemical and Engineering Aspects · doi:10.1016/j.colsurfa.2013.02.029 · Cited by 176
Mao, M., Lv, H., Li, Y., Yang, Y., Zeng, M., Li, N., & Zhao, X. (2016) · ACS Catalysis · doi:10.1021/acscatal.5b02371 · Cited by 166
Highly sensitive and selective hydrogen single-nanowire nanosensor
Lupan, O., Chow, L., Pauporté, T., Ono, L. K., Roldan Cuenya, B., & Chai, G. (2012) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2012.07.111 · Cited by 159
Lupan, O. I., Postica, V., Labat, F., Ciofini, I., Pauporté, T., & Adelung, R. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.07.200 · Cited by 158
SnO2 (n)-NiO (p) composite nanowebs: Gas sensing properties and sensing mechanisms
Kim, J., Lee, J., Mirzaei, A., Kim, H. W., & Kim, S. S. (2017) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2017.11.063 · Cited by 152
van Bokhoven, J. A., & Miller, J. T. (2007) · The Journal of Physical Chemistry C · doi:10.1021/jp070755t · Cited by 140
On-chip growth of semiconductor metal oxide nanowires for gas sensors: A review
Hung, C. M., Le, D. T. T., & Hieu, N. V. (2017) · Journal of Science Advanced Materials and Devices · doi:10.1016/j.jsamd.2017.07.009 · Cited by 109
Happel, M., Mysliveček, J., Johánek, V., et al. (2012) · Journal of Catalysis · doi:10.1016/j.jcat.2012.01.022 · Cited by 105
Thormann, J., Maier, L., Pfeifer, P., Kunz, U., Deutschmann, O., & Schubert, K. (2009) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2009.04.031 · Cited by 92
Role of Site Stability in Methane Activation on PdxCe1–xOδ Surfaces
Senftle, T. P., van Duin, A. C. T., & Janik, M. J. (2015) · ACS Catalysis · doi:10.1021/acscatal.5b00741 · Cited by 84
Design of Highly Selective Gas Sensors via Physicochemical Modification of Oxide Nanowires: Overview
Woo, H.-S., Na, C. W., & Lee, J. (2016) · Sensors · doi:10.3390/s16091531 · Cited by 80
Exploiting Synergies in Catalysis and Gas Sensing using Noble Metal‐Loaded Oxide Composites
Müller, S., Degler, D., Feldmann, C., Türk, M., Moos, R., Fink, K., Studt, F., Gerthsen, D., Bârsan, N., & Grunwaldt, J. (2017) · ChemCatChem · doi:10.1002/cctc.201701545 · Cited by 64
Self-citationCharacterization of Pt-doped SnO2 catalyst for a high-performance micro gas sensor
Murata, N., Suzuki, T., Kobayashi, M., Togoh, F., & Asakura, K. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c3cp52490f · Cited by 61
Trends and advances in Operando methodology
Urakawa, A. (2016) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2016.02.002 · Cited by 55
Recent trends in silicon carbide (SiC) and graphene-based gas sensors
Andersson, M., Spetz, A. L., & Pearce, R. (2013) · Elsevier eBooks · doi:10.1533/9780857098665.2.117 · Cited by 50
Orthogonal gas sensor arrays by chemoresistive material design
Pineau, N. J., Kompalla, J. F., Güntner, A. T., & Pratsinis, S. E. (2018) · Microchimica Acta · doi:10.1007/s00604-018-3104-z · Cited by 49
Trends and Advances in the Characterization of Gas Sensing Materials Based on Semiconducting Oxides
Degler, D. (2018) · Sensors · doi:10.3390/s18103544 · Cited by 44
Self-citationSpecific, trace gas induced phase transition in copper(II)oxide for highly selective gas sensing
Kneer, J., Wöllenstein, J., & Palzer, S. (2014) · Applied Physics Letters · doi:10.1063/1.4893736 · Cited by 27
Chemical and Biochemical Sensors, 1. Fundamentals
Bârsan, N., Gauglitz, G., Oprea, A., Ostertag, E., Proll, G., Rebner, K., Schierbaum, K. D., Schleifenbaum, F. E., & Weimar, U. (2016) · Ullmann's Encyclopedia of Industrial Chemistry · doi:10.1002/14356007.b06_121.pub2 · Cited by 23
Self-citationEffects of Ag Additive in Low Temperature CO Detection with In2O3 Based Gas Sensors
Naberezhnyi, D., Rumyantseva, M. N., Filatova, D. G., Batuk, M., Hadermann, J., Baranchikov, A. E., Khmelevsky, N. O., Aksenenko, A. Y., Konstantinova, E. A., & Gaskov, A. M. (2018) · Nanomaterials · doi:10.3390/nano8100801 · Cited by 23
Cited by
Selectivity in Chemiresistive Gas Sensors: Strategies and Challenges
Bulemo, P. M., Kim, D.-H., Shin, H., Cho, H.-J., Koo, W.-T., Choi, S.-J., Park, C., Ahn, J., Güntner, A. T., Penner, R. M., et al. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00592 · Cited by 418
Jeong, S., Kim, J., & Lee, J. (2020) · Advanced Materials · doi:10.1002/adma.202002075 · Cited by 415
Porous materials as effective chemiresistive gas sensors
Sharma, A., Eadi, S. B., Noothalapati, H., Otyepka, M., Lee, H.-D., & Jayaramulu, K. (2024) · Chemical Society Reviews · doi:10.1039/d2cs00761d · Cited by 352
Zhou, T., & Zhang, T. (2021) · Small Methods · doi:10.1002/smtd.202100515 · Cited by 350
Electrospinning and Nanofiber Technology: Fundamentals, Innovations, and Applications
Cho, Y., Baek, J. W., Sagong, M., Ahn, S., Nam, J. S., & Kim, I. (2025) · Advanced Materials · doi:10.1002/adma.202500162 · Cited by 334
Metadata
- Authors
- Degler, D., Weimar, U., & Barsan, N.
- Venue
- ACS Sensors
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-07-31
- Volume
- 4
- Issue
- 9
- Pages
- 2228-2249
- ISSN
- 2379-3694 (ISSN-L)
- OpenAlex
- W2964813318
- Cited by
- 519
- References
- 59
- FWCI
- 17.01
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.