The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Ti3C2 MXene-Based Sensors with High Selectivity for NH3 Detection at Room Temperature
Abstract
In this study, from experiments and theoretical calculation, we reported that Ti 3 C 2 MXene can be applied as sensors for NH 3 detection at room temperature with high selectivity. Ti 3 C 2 MXene, a novel two-dimensional carbide, was prepared by etching off Al atoms from Ti 3 AlC 2 . The as-prepared multilayer Ti 3 C 2 MXene powders were delaminated to a single layer by intercalation and ultrasonic dispersion. The colloidal suspension of single-layer Ti 3 C 2 -MXene was coated on the surface of ceramic tubes to construct sensors for gas detection. Thereafter, the sensors were used to detect various gases (CH 4, H 2 S, H 2 O, NH 3, NO, ethanol, methanol, and acetone) with a concentration of 500 ppm at room temperature. Ti 3 C 2 MXene-based sensors have high selectivity to NH 3 compared with other gases. The response to NH 3 was 6.13%, which was four times the second highest response (1.5% to ethanol gas). To understand the high selectivity, first-principles calculations were conducted to explore adsorption behaviors. From adsorption energy, adsorbed geometry, and charge transfer, it was confirmed that Ti 3 C 2 MXene theoretically has a high selectivity to NH 3, compared with other gases in this experiment. Moreover, the response of the sensor to NH 3 increased almost linearly with NH 3 concentration from 10 to 700 ppm. The humidity tests and cycle tests of NH 3 showed that the Ti 3 C 2 MXene-based gas sensor has excellent performances for NH 3 detection at room temperature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Generalized Gradient Approximation Made Simple
Perdew, J. P., Burke, K., & Ernzerhof, M. (1996) · Physical Review Letters · doi:10.1103/physrevlett.77.3865 · Cited by 215,824
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Semiempirical GGA‐type density functional constructed with a long‐range dispersion correction
Grimme, S. (2006) · Journal of Computational Chemistry · doi:10.1002/jcc.20495 · Cited by 31,038
A fast and robust algorithm for Bader decomposition of charge density
Henkelman, G., Arnaldsson, A., & Jónsson, H. (2006) · Computational Materials Science · doi:10.1016/j.commatsci.2005.04.010 · Cited by 10,723
2D metal carbides and nitrides (MXenes) for energy storage
Anasori, B., Lukatskaya, M. R., & Gogotsi, Y. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.98 · Cited by 7,440
Conductive two-dimensional titanium carbide ‘clay’ with high volumetric capacitance
Ghidiu, M., Lukatskaya, M. R., Zhao, M.-Q., Gogotsi, Y., & Barsoum, M. W. (2014) · Nature · doi:10.1038/nature13970 · Cited by 5,997
Intercalation and delamination of layered carbides and carbonitrides
Mashtalir, O., Naguib, M., Mochalin, V. N., Dall’Agnese, Y., Heon, M., Barsoum, M. W., & Gogotsi, Y. (2013) · Nature Communications · doi:10.1038/ncomms2664 · Cited by 2,852
Novel Electronic and Magnetic Properties of Two‐Dimensional Transition Metal Carbides and Nitrides
Khazaei, M., Arai, M., Sasaki, T., Chung, C., Venkataramanan, N. S., Estili, M., Sakka, Y., & Kawazoe, Y. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201202502 · Cited by 1,998
Liu, J., Zhang, H., Sun, R., Liu, Y., Liu, Z., Zhou, A., & Yu, Z. (2017) · Advanced Materials · doi:10.1002/adma.201702367 · Cited by 1,819
Self-citationCarbon Nanotube Sensors for Gas and Organic Vapor Detection
Li, J., Lu, Y., Ye, Q., Cinke, M., Han, J., & Meyyappan, M. (2003) · Nano Letters · doi:10.1021/nl034220x · Cited by 1,810
Ammonia sensors and their applications—a review
Timmer, B., Olthuis, W., & Berg, A. V. D. (2005) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2004.11.054 · Cited by 1,714
Metallic Ti3C2T x MXene Gas Sensors with Ultrahigh Signal-to-Noise Ratio
Kim, S. J., Koh, H.-J., Ren, C. E., Kwon, O., Maleski, K., Cho, S.-Y., Anasori, B., Kim, C.-K., Choi, Y.-K., Kim, J., et al. (2018) · ACS Nano · doi:10.1021/acsnano.7b07460 · Cited by 1,699
Gas Sensors Based on Conducting Polymers
Bai, H., & Shi, G. (2007) · Sensors · doi:10.3390/s7030267 · Cited by 1,577
2D MXenes: A New Family of Promising Catalysts for the Hydrogen Evolution Reaction
Gao, G., O’Mullane, A. P., & Du, A. (2017) · ACS Catalysis · doi:10.1021/acscatal.6b02754 · Cited by 1,153
Electronic properties and applications of MXenes: a theoretical review
Khazaei, M., Ranjbar, A., Arai, M., Sasaki, T., & Yunoki, S. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00140a · Cited by 1,151
A Two‐Dimensional Lamellar Membrane: MXene Nanosheet Stacks
Ding, L., Wei, Y., Wang, Y., Chen, H., Caro, J., & Wang, H. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201609306 · Cited by 1,111
Elastic properties of 2D Ti 3 C 2 T x MXene monolayers and bilayers
Lipatov, A., Lu, H., Alhabeb, M., Anasori, B., Gruverman, A., Gogotsi, Y., & Sinitskii, A. (2018) · Science Advances · doi:10.1126/sciadv.aat0491 · Cited by 1,064
Room Temperature Gas Sensing of Two-Dimensional Titanium Carbide (MXene)
Lee, E., VahidMohammadi, A., Prorok, B. C., Yoon, Y. S., Beidaghi, M., & Kim, D.-J. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b11055 · Cited by 878
Liu, F., Zhou, A., Chen, J., Jia, J., Zhou, W., Wang, L., & Hu, Q. (2017) · Applied Surface Science · doi:10.1016/j.apsusc.2017.04.239 · Cited by 707
Self-citationYu, X.-F., Li, Y.-C., Cheng, J.-B., Liu, Z.-B., Li, Q.-Z., Li, W.-Z., Yang, X., & Xiao, B. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b03737 · Cited by 676
Stamping of Flexible, Coplanar Micro‐Supercapacitors Using MXene Inks
Zhang, C. (., Kremer, M. P., Seral‐Ascaso, A., Park, S., McEvoy, N., Anasori, B., Gogotsi, Y., & Nicolosi, V. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201705506 · Cited by 637
Atomically Resolved Structural and Chemical Investigation of Single MXene Sheets
Karlsson, L. H., Birch, J., Halim, J., Barsoum, M. W., & Persson, P. O. Å. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b00737 · Cited by 576
MXene: A New Family of Promising Hydrogen Storage Medium
Hu, Q., Sun, D., Wu, Q., Wang, H., Wang, L., Liu, B., Zhou, A., & He, J. (2013) · The Journal of Physical Chemistry A · doi:10.1021/jp409585v · Cited by 518
Self-citationPreparation of High-Purity V2C MXene and Electrochemical Properties as Li-Ion Batteries
Liu, F., Zhou, J., Wang, S., Wang, B., Shen, C., Wang, L., Hu, Q., Huang, Q., & Zhou, A. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0641704jes · Cited by 415
Self-citationAbdulla, S., Mathew, T. L., & Pullithadathil, B. (2015) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2015.08.002 · Cited by 404
A flexible VOCs sensor based on a 3D Mxene framework with a high sensing performance
Yuan, W., Yang, K., Peng, H., Li, F., & Yin, F. (2018) · Journal of Materials Chemistry A · doi:10.1039/c8ta06928j · Cited by 400
Current status of clinical breath analysis
Risby, T. H., & Solga, S. F. (2006) · Applied Physics B · doi:10.1007/s00340-006-2280-4 · Cited by 363
Fabrication and thermal stability of NH 4 HF 2 -etched Ti 3 C 2 MXene
Feng, A., Yu, Y., Jiang, F., Wang, Y., Mi, L., Yu, Y., & Song, L. (2017) · Ceramics International · doi:10.1016/j.ceramint.2017.02.039 · Cited by 347
Chemical Origin of Termination-Functionalized MXenes: Ti3C2T2 as a Case Study
Hu, T., Li, Z., Hu, M., Wang, J., Hu, Q., Li, Q., & Wang, X. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b05675 · Cited by 300
Self-citationMXenes: Reusable materials for NH3 sensor or capturer by controlling the charge injection
Xiao, B., Li, Y.-C., Yu, X.-F., & Cheng, J.-B. (2016) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2016.05.062 · Cited by 292
Sandwich-like Co3O4/MXene composite with enhanced catalytic performance for Bisphenol A degradation
Liu, Y., Luo, R., Li, Y., Qi, J., Wang, C., Li, J., Sun, X., & Wang, L. (2018) · Chemical Engineering Journal · doi:10.1016/j.cej.2018.04.155 · Cited by 282
Pandey, M., & Thygesen, K. S. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b05270 · Cited by 259
Hu, Q., Wang, H., Wu, Q., Ye, X., Zhou, A., Sun, D., Wang, L., Liu, B., & He, J. (2014) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2014.05.037 · Cited by 233
Self-citationHigh photoluminescence quantum yield of 18.7% by using nitrogen-doped Ti 3 C 2 MXene quantum dots
Xu, Q., Ding, L., Wen, Y., et al. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc02156b · Cited by 231
Hu, T., Hu, M., Gao, B., Li, W., & Wang, X. (2018) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b04427 · Cited by 230
Sharma, S., Hussain, S., Singh, S., & Islam, S. S. (2014) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2013.12.050 · Cited by 212
A selective NH3 gas sensor based on Fe2O3–ZnO nanocomposites at room temperature
Tang, H., Yan, M., Zhang, H., Li, S., Ma, X., Wang, M., & Yang, D. (2006) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2005.08.010 · Cited by 179
Monolayer Sc 2 CO 2 : A Promising Candidate as a SO 2 Gas Sensor or Capturer
Ma, S., Yuan, D., Jiao, Z., Wang, T., & Dai, X. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b07921 · Cited by 172
Junkaew, A., & Arróyave, R. (2018) · Physical Chemistry Chemical Physics · doi:10.1039/c7cp08622a · Cited by 165
Highly sensitive H2S gas sensors based on Pd-doped CuO nanoflowers with low operating temperature
Hu, X., Zhu, Z., Chen, C., Wen, T., Zhao, X., & Xie, L. (2017) · Sensors and Actuators B: Chemical · doi:10.1016/j.snb.2017.06.183 · Cited by 158
Self-citationSnO 2 /SnS 2 nanotubes for flexible room-temperature NH 3 gas sensors
Li, R., Jiang, K., Chen, S., Lou, Z., Huang, T., Chen, D., & Shen, G. (2017) · RSC Advances · doi:10.1039/c7ra10537a · Cited by 148
Synthesis of high pure Ti3AlC2 and Ti2AlC powders from TiH2 powders as Ti source by tube furnace
Li, L., Zhou, A., Xu, L., Li, Z., & Wang, L. (2013) · Journal of Wuhan University of Technology-Mater Sci Ed · doi:10.1007/s11595-013-0786-2 · Cited by 68
Self-citationAmmonia-Sensitive Photonic Structures Fabricated in Nafion Membranes by Laser Ablation
Hurtado, J. L. M., & Lowe, C. R. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5016588 · Cited by 44
Cited by
Ti3C2TX MXene for Sensing Applications: Recent Progress, Design Principles, and Future Perspectives
Pei, Y., Zhang, X., Hui, Z., Zhou, J., Huang, X., Sun, G., & Huang, W. (2021) · ACS Nano · doi:10.1021/acsnano.1c00248 · Cited by 799
Self-citationWang, D., Zhang, D., Yang, Y., Mi, Q., Zhang, J., & Yu, L. (2021) · ACS Nano · doi:10.1021/acsnano.0c09015 · Cited by 687
Recent Advances in Oxidation Stable Chemistry of 2D MXenes
Cao, F., Zhang, Y., Wang, H., Khan, K., Tareen, A. K., Qian, W., Zhang, H., & Ågren, H. (2022) · Advanced Materials · doi:10.1002/adma.202107554 · Cited by 648
Sensing with MXenes: Progress and Prospects
Ho, D. H., Choi, Y. Y., Jo, S. B., Myoung, J., & Cho, J. H. (2021) · Advanced Materials · doi:10.1002/adma.202005846 · Cited by 482
2D Transition Metal Carbides (MXenes): Applications as an Electrically Conducting Material
Shahzad, F., Iqbal, A., Kim, H., & Koo, C. M. (2020) · Advanced Materials · doi:10.1002/adma.202002159 · Cited by 451
Metadata
- Authors
- Wu, M., He, M., Hu, Q., Wu, Q., Sun, G., Xie, L., Zhang, Z., Zhu, Z., & Zhou, A.
- Venue
- ACS Sensors
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-09-30
- Volume
- 4
- Issue
- 10
- Pages
- 2763-2770
- ISSN
- 2379-3694 (ISSN-L)
- OpenAlex
- W2977702167
- Cited by
- 602
- References
- 44
- FWCI
- 17.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.