The DOI matches its Crossref record; 64 of the 64 references it cites were found in a registry or an index.
Kinetics, Product Evolution, and Mechanism for the Pyrolysis of Typical Plastic Waste
Abstract
This research investigates the kinetic, product evolution, mechanism of polyethylene (PE), polypropylene (PP), and a simulated mixture of plastic waste (SMP) via TGA/DSC–MS and Py-GC–MS. The pyrolysis reactions were predominantly endothermic, and the main degradation stage of PE, PP, and SMP ranged from 389.85 to 502.17 °C, from 374.91 to 495.15 °C, and from 368.30 to 496.29 °C, respectively. The kinetic results showed that polyolefin pyrolysis was identified to be the geometrical contraction models with apparent activation energies of 224.31–235.32 kJ mol –1 for PE and 199.00–207.66 kJ mol –1 for PP, respectively. The SMP pyrolysis follows the first-order reaction models, and its apparent activation energy was 185.29–199.54 kJ mol –1 . Polyolefin pyrolysis products only contain C 4 –C 35 paraffin with linear alkenes for PE and branch or cyclic alkenes for PP. The large amounts of benzene radicals in the pyrolysis of SMP tended to form aromatics. The pyrolysis behavior and product formation mechanism of the plastic waste could make available practical implications for the reactor design and parameter optimization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Vyazovkin, S., Burnham, A. K., Criado, J. M., Pérez-Maqueda, L. A., Popescu, C., & Sbirrazzuoli, N. (2011) · Thermochimica Acta · doi:10.1016/j.tca.2011.03.034 · Cited by 5,961
Variation of peak temperature with heating rate in differential thermal analysis
Kissinger, H. E. (1956) · Journal of Research of the National Bureau of Standards · doi:10.6028/jres.057.026 · Cited by 3,924
A review on pyrolysis of plastic wastes
Anuar Sharuddin, S. D., Abnisa, F., Wan Daud, W. M. A., & Aroua, M. K. (2016) · Energy Conversion and Management · doi:10.1016/j.enconman.2016.02.037 · Cited by 2,126
Aboulkas, A., El harfi, K., & El Bouadili, A. (2010) · Energy Conversion and Management · doi:10.1016/j.enconman.2009.12.017 · Cited by 726
Gotor, F. J., Criado, J. M., Malek, J., & Koga, N. (2000) · The Journal of Physical Chemistry A · doi:10.1021/jp0022205 · Cited by 659
Jung, S.-H., Cho, M.-H., Kang, B.-S., & Kim, J.-S. (2010) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.10.009 · Cited by 440
Influence of time and temperature on pyrolysis of plastic wastes in a semi-batch reactor
López, A., de Marco, I., Caballero, B. M., Laresgoiti, M. F., & Adrados, A. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.07.037 · Cited by 399
Xu, F., Wang, B., Yang, D., Hao, J., Qiao, Y., & Tian, Y. (2018) · Energy Conversion and Management · doi:10.1016/j.enconman.2018.06.047 · Cited by 372
Interaction of Plastics in Mixed-Plastics Pyrolysis
Williams, P. T., & Williams, E. A. (1999) · Energy & Fuels · doi:10.1021/ef980163x · Cited by 360
Use of recycled plastic as fine aggregate in cementitious composites: A review
Almeshal, I., Tayeh, B. A., Alyousef, R., Alabduljabbar, H., Mustafa Mohamed, A., & Alaskar, A. (2020) · Construction and Building Materials · doi:10.1016/j.conbuildmat.2020.119146 · Cited by 313
Singh, R. K., & Ruj, B. (2016) · Fuel · doi:10.1016/j.fuel.2016.01.049 · Cited by 279
Thermogravimetric analysis and reaction kinetics of lignocellulosic biomass pyrolysis
Xiao, R., Yang, W., Cong, X., Dong, K., Xu, J., Wang, D., & Yang, X. (2020) · Energy · doi:10.1016/j.energy.2020.117537 · Cited by 271
Thermal degradation kinetics of plastics and model selection
Das, P., & Tiwari, P. (2017) · Thermochimica Acta · doi:10.1016/j.tca.2017.06.001 · Cited by 265
Challenges of plastic waste generation and management in sub-Saharan Africa: A review
Ayeleru, O. O., Dlova, S., Akinribide, O. J., Ntuli, F., Kupolati, W. K., Marina, P. F., Blencowe, A., & Olubambi, P. A. (2020) · Waste Management · doi:10.1016/j.wasman.2020.04.017 · Cited by 243
Yao, D., Li, H., Dai, Y., & Wang, C.-H. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.127268 · Cited by 241
Kinetic analysis and pyrolysis behaviour of waste biomass towards its bioenergy potential
Mishra, R. K., & Mohanty, K. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123480 · Cited by 240
Wang, C., Bi, H., Lin, Q., Jiang, X., & Jiang, C. (2020) · Renewable Energy · doi:10.1016/j.renene.2020.07.046 · Cited by 234
Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2019) · Journal of Environmental Management · doi:10.1016/j.jenvman.2019.03.067 · Cited by 232
Singh, R. K., Ruj, B., Sadhukhan, A. K., & Gupta, P. (2019) · Journal of the Energy Institute · doi:10.1016/j.joei.2019.01.009 · Cited by 230
Elordi, G., Olazar, M., Lopez, G., Artetxe, M., & Bilbao, J. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie200186m · Cited by 224
Study on the co-pyrolysis of rice straw and high density polyethylene blends using TG-FTIR-MS
Kai, X., Li, R., Yang, T., Shen, S., Ji, Q., & Zhang, T. (2017) · Energy Conversion and Management · doi:10.1016/j.enconman.2017.05.026 · Cited by 209
Mishra, R. K., Sahoo, A., & Mohanty, K. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2019.121608 · Cited by 199
Singh, S., Patil, T., Tekade, S. P., Gawande, M. B., & Sawarkar, A. N. (2021) · Science of The Total Environment · doi:10.1016/j.scitotenv.2021.147004 · Cited by 195
The effect of slow pyrolysis on the conversion of packaging waste plastics (PE and PP) into fuel
Das, P., & Tiwari, P. (2018) · Waste Management · doi:10.1016/j.wasman.2018.08.021 · Cited by 194
Kinetic study of municipal plastic waste
Diaz Silvarrey, L. S., & Phan, A. N. (2016) · International Journal of Hydrogen Energy · doi:10.1016/j.ijhydene.2016.05.202 · Cited by 190
A review on kinetic study approach for pyrolysis of plastic wastes using thermogravimetric analysis
Mortezaeikia, V., Tavakoli, O., & Khodaparasti, M. S. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105340 · Cited by 183
Ding, Z., Chen, H., Liu, J., Cai, H., Evrendilek, F., & Buyukada, M. (2021) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2020.123472 · Cited by 177
Hu, Q., Tang, Z., Yao, D., Yang, H., Shao, J., & Chen, H. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121102 · Cited by 175
Menares, T., Herrera, J., Romero, R., Osorio, P., & Arteaga-Pérez, L. E. (2020) · Waste Management · doi:10.1016/j.wasman.2019.10.027 · Cited by 174
Liquid oils produced from pyrolysis of plastic wastes with heat carrier in rotary kiln
Zhang, Y., Ji, G., Chen, C., Wang, Y., Wang, W., & Li, A. (2020) · Fuel Processing Technology · doi:10.1016/j.fuproc.2020.106455 · Cited by 171
Self-citationComparative pyrolysis of polyolefins (PP and LDPE) and PET
Çit, İ., Sınağ, A., Yumak, T., Uçar, S., Mısırlıoğlu, Z., & Canel, M. (2010) · Polymer Bulletin · doi:10.1007/s00289-009-0225-x · Cited by 168
Xue, M., Xu, F., Jiang, Y., Zong, P., Wang, B., Li, J., Qiao, Y., & Tian, Y. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.118713 · Cited by 165
Thermogravimetric analysis of the co-pyrolysis of paper sludge and municipal solid waste
Fang, S., Yu, Z., Lin, Y., Hu, S., Liao, Y., & Ma, X. (2015) · Energy Conversion and Management · doi:10.1016/j.enconman.2015.06.026 · Cited by 162
Research and management of plastic pollution in coastal environments of China
Wang, M. H., He, Y., & Sen, B. (2019) · Environmental Pollution · doi:10.1016/j.envpol.2019.02.098 · Cited by 161
Muhammad, C., Onwudili, J. A., & Williams, P. T. (2015) · Energy & Fuels · doi:10.1021/ef502749h · Cited by 156
Quantitative and kinetic TG-FTIR investigation on three kinds of biomass pyrolysis
Meng, A., Zhou, H., Qin, L., Zhang, Y., & Li, Q. (2013) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2013.09.013 · Cited by 154
Self-citationPolyethylene high-pressure pyrolysis: Better product distribution and process mechanism analysis
Cheng, L., Gu, J., Wang, Y., Zhang, J., Yuan, H., & Chen, Y. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.123866 · Cited by 152
Fuel production from waste polystyrene via pyrolysis: Kinetics and products distribution
Nisar, J., Ali, G., Shah, A., Iqbal, M., Khan, R. A., Uddin, S., Anwar, F., Ullah, R., & Akhter, M. S. (2019) · Waste Management · doi:10.1016/j.wasman.2019.03.035 · Cited by 148
Kinetic study of the effect of in-situ mineral solids on pyrolysis process of oil sludge
Qu, Y., Li, A., Wang, D., Zhang, L., & Ji, G. (2019) · Chemical Engineering Journal · doi:10.1016/j.cej.2019.05.183 · Cited by 147
Self-citationBrems, A., Baeyens, J., Beerlandt, J., & Dewil, R. (2011) · Resources Conservation and Recycling · doi:10.1016/j.resconrec.2011.03.003 · Cited by 143
Exergy and energy analysis of pyrolysis of plastic wastes in rotary kiln with heat carrier
Zhang, Y., Ji, G., Ma, D., Chen, C., Wang, Y., Wang, W., & Li, A. (2020) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2020.06.021 · Cited by 142
Self-citationMumbach, G. D., Alves, J. L. F., da Silva, J. C. G., de Sena, R. F., Marangoni, C., Machado, R. A. F., & Bolzan, A. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112031 · Cited by 136
New Temperature Integral Approximate Formula for Non-isothermal Kinetic Analysis
Wanjun, T., Yuwen, L., Hen, Z., Zhiyong, W., & Cunxin, W. (2003) · Journal of Thermal Analysis and Calorimetry · doi:10.1023/a:1026310710529 · Cited by 133
Wang, Y. Z., Li, Y., Zhang, C., Liguo, Y., Fan, X., & Chu, L. (2021) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2021.04.002 · Cited by 131
Thermal degradation of medical plastic waste by in-situ FTIR, TG-MS and TG-GC/MS coupled analyses
Qin, L., Han, J., Zhao, B., Wang, Y., Chen, W., & Xing, F. (2018) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2018.10.012 · Cited by 130
Liu, Q., Liu, S., Lv, Y., Hu, P., Huang, Y., Kong, M., & Li, G. (2020) · Fuel · doi:10.1016/j.fuel.2020.119484 · Cited by 124
Coelho, A., Costa, L., Marques, M. M., Fonseca, I., Lemos, M. A. N. D. A., & Lemos, F. (2011) · Applied Catalysis A General · doi:10.1016/j.apcata.2011.11.010 · Cited by 123
Kumar, M., Shukla, S. K., Upadhyay, S. N., & Mishra, P. K. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123393 · Cited by 123
Sun, C., Li, C., Tan, H., & Zhang, Y. (2019) · Energy Conversion and Management · doi:10.1016/j.enconman.2019.112212 · Cited by 114
Self-citationRazzaq, M., Zeeshan, M., Qaisar, S., Iftikhar, H., & Muneer, B. (2019) · Fuel · doi:10.1016/j.fuel.2019.116119 · Cited by 112
Fang, S., Yu, Z., Lin, Y., Lin, Y., Fan, Y., Liao, Y., & Ma, X. (2016) · Bioresource Technology · doi:10.1016/j.biortech.2016.03.027 · Cited by 109
Activator-assisted pyrolysis of polypropylene
Park, K.-B., Jeong, Y.-S., & Kim, J.-S. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113558 · Cited by 108
Pyrolysis kinetics of olive residue/plastic mixtures by non-isothermal thermogravimetry
Aboulkas, A., harfi, K. E., bouadili, A. E., et al. (2009) · Fuel Processing Technology · doi:10.1016/j.fuproc.2009.01.016 · Cited by 100
Ding, Z., Liu, J., Chen, H., Huang, S., Evrendilek, F., He, Y., & Zheng, L. (2021) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2021.149397 · Cited by 100
Pyrolysis characteristics of soil humic substances using TG-FTIR-MS combined with kinetic models
Li, T., Song, F., Zhang, J., Liu, S., Xing, B., & Bai, Y. (2019) · The Science of The Total Environment · doi:10.1016/j.scitotenv.2019.134237 · Cited by 96
Zhao, M. M., Florin, N., & Harris, A. T. (2009) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2009.07.011 · Cited by 94
Self-citationIso-conversional kinetics of low-lipid micro-algae gasification by air
Zhao, M. M., Raheem, A., Memon, Z. M., Vuppaladadiyam, A. K., & Ji, G. (2018) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2018.10.040 · Cited by 92
Self-citationPyrolysis kinetics of short rotation coppice poplar biomass
Rego, F., Dias, A. P. S., Casquilho, M., Rosa, F. C., & Rodrigues, A. M. (2020) · Energy · doi:10.1016/j.energy.2020.118191 · Cited by 71
Tao, L., Ma, X., Ye, L., Jia, J., Wang, L., Ma, P., & Liu, J. (2021) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2021.105267 · Cited by 60
Vuppaladadiyam, A. K., Memon, M. Z., Ji, G., Raheem, A., Jia, T. Z., Dupont, V. A., & Zhao, M. M. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b02967 · Cited by 60
Self-citationChen, Z., Liu, J., Chen, H., Ding, Z., Tang, X., & Evrendilek, F. (2021) · Renewable Energy · doi:10.1016/j.renene.2021.10.010 · Cited by 59
Slow pyrolysis of an LDPE/PP mixture: Kinetics and process performance
Maniscalco, M., Paglia, F. L., Iannotta, P., Caputo, G., Scargiali, F., Grisafi, F., & Brucato, A. (2021) · Journal of the Energy Institute · doi:10.1016/j.joei.2021.03.006 · Cited by 58
Gou, X., Zhao, X., Singh, S., & Qiao, D. (2019) · Fuel · doi:10.1016/j.fuel.2019.03.143 · Cited by 42
Zhao, M. M., Cui, X., Ji, G., Zhou, H., Vuppaladadiyam, A. K., & Zhao, X. Y. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b04855 · Cited by 24
Self-citation
Research works printed but not linked: 6
- 10.1016/0360-3199(90)90102-5 · doi:10.1016/0360-3199(90)90102-5
- 10.1002/jps.2600630103 · doi:10.1002/jps.2600630103
- 10.1021/ef401376m · doi:10.1021/ef401376m
- 10.1016/j.polymdegradstab.2014.03.022 · doi:10.1016/j.polymdegradstab.2014.03.022
- 10.1016/j.jaap.2014.09.022 · DOI
- 10.1021/acs.energyfuels.7b03332 · doi:10.1021/acs.energyfuels.7b03332
Cited by
Depolymerization within a Circular Plastics System
Clark, R. A., & Shaver, M. P. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00739 · Cited by 408
Plastic waste as pyrolysis feedstock for plastic oil production: A review
Chang, S. H. (2023) · Science of The Total Environment · doi:10.1016/j.scitotenv.2023.162719 · Cited by 302
Du, M., Zhang, Y., Kang, S., Guo, X., Ma, Y., Xing, M., Zhu, Y., Chai, Y., & Qiu, B. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c03605 · Cited by 271
Self-citationDong, Z., Chen, W., Xu, K., Liu, Y., Wu, J., & Zhang, F. (2022) · ACS Catalysis · doi:10.1021/acscatal.2c04915 · Cited by 269
Calero, M., Solís, R. R., Muñoz-Batista, M. J., Pérez, A., Blázquez, G., & Ángeles Martín-Lara, M. (2023) · Chemical Engineering Science · doi:10.1016/j.ces.2023.118569 · Cited by 67
Metadata
- Authors
- Zhang, Y., Fu, Z., Wang, W., Ji, G., Zhao, M., & Li, A.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2021-12-20
- Volume
- 10
- Issue
- 1
- Pages
- 91-103
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W4200540523
- Cited by
- 283
- References
- 64
- FWCI
- 9.33
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- Funders
- Ministry of Education of the People's Republic of China (DUT20YG109)
- Liaoning Revitalization Talents Program (XLYC2007179)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.