Catalytic Copyrolysis of Cellulose and Thermoplastics over HZSM-5 and HY
The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Abstract
Catalytic pyrolysis with HZSM-5 is a promising method for the production of renewable aromatic hydrocarbons directly from biomass, even though the aromatic yields are still very low. Recent studies have shown that cofeeding of biomass with plastic significantly improves the aromatic yield due to high hydrogen content in plastic. In an effort to determine the influence of the zeolite pore size and the molecular diameter of cofeeding plastic on the aromatic production, catalytic copyrolysis of cellulose and thermoplastics, including random polypropylene (PP) and linear low density polyethylene (LLDPE) was conducted over HZSM-5 and HY catalysts. Thermogravimetric (TG) results showed that maximum decomposition temperature of PP was shifted to the higher temperature when PP was copyrolyzed with cellulose over HZSM-5 because the diffusion of PP molecules was hindered by the cellulose-derived coke and char. This hindering effect was attenuated by employing LLDPE as the cofeeding plastic due to its smaller molecular diameter than PP, and/or applying HY due to its larger pore size than HZSM-5. Heart-cut-evolved gas analysis (EGA)-GC/MS and flash pyrolysis-GC/FID were used to monitor the detailed product distribution and yields. The synergistic aromatic formation was easily achieved over HY catalyst for both PP and LLDPE, demonstrating the effectiveness of the larger pore zeolite for the catalytic copyrolysis. In contrast, HZSM-5 was very effective for the enhancement of aromatic production under severe reaction conditions, such as high catalyst to feed ratio (i.e., 10:1) or high pyrolysis temperature (i.e., 600 °C).
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Screening acidic zeolites for catalytic fast pyrolysis of biomass and its components
Mihalcik, D. J., Mullen, C. A., & Boateng, A. A. (2011) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2011.06.001 · Cited by 513
Controlling the selectivity to chemicals from lignin via catalytic fast pyrolysis
Ma, Z., Troussard, E., & van Bokhoven, J. A. (2012) · Applied Catalysis A: General · doi:10.1016/j.apcata.2012.02.027 · Cited by 363
Catalytic fast pyrolysis of aspen lignin via Py-GC/MS
Zhang, M., Resende, F. L. P., & Moutsoglou, A. (2014) · Fuel · doi:10.1016/j.fuel.2013.07.128 · Cited by 159
Product quality and catalyst deactivation in a four day catalytic fast pyrolysis production run
Paasikallio, V., Lindfors, C., Kuoppala, E., Solantausta, Y., Oasmaa, A., Lehto, J., & Lehtonen, J. (2014) · Green Chemistry · doi:10.1039/c4gc00571f · Cited by 154
Investigation on catalytic pyrolysis of pine sawdust: Catalyst screening by Py-GC-MIP-AED
Torri, C., Reinikainen, M., Lindfors, C., Fabbri, D., Oasmaa, A., & Kuoppala, E. (2010) · Journal of Analytical and Applied Pyrolysis · doi:10.1016/j.jaap.2010.02.005 · Cited by 141
Cited by
Biomass pyrolysis: past, present, and future
Fahmy, T. Y. A., Fahmy, Y., Mobarak, F., El-Sakhawy, M., & Abou-Zeid, R. E. (2020) · Environment, Development and Sustainability · doi:10.1007/s10668-018-0200-5 · Cited by 528
Catalytic co-pyrolysis of lignocellulosic biomass with polymers: a critical review
Zhang, X., Lei, H., Chen, S., & Wu, J. (2016) · Green Chemistry · doi:10.1039/c6gc00911e · Cited by 497
Chen, X., Che, Q., Li, S., Liu, Z., Yang, H., Chen, Y., Wang, X., Shao, J., & Chen, H. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.106180 · Cited by 460
Ryu, H. W., Kim, D. H., Jae, J., Lam, S. S., Park, E. D., & Park, Y.-K. (2020) · Bioresource Technology · doi:10.1016/j.biortech.2020.123473 · Cited by 336
Self-citationCatalytic fast pyrolysis of lignocellulosic biomass: Critical role of zeolite catalysts
Liang, J., Shan, G., & Sun, Y. (2021) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.110707 · Cited by 267
Engamba Esso, S. B., Xiong, Z., Chaiwat, W., Kamara, M. F., Longfei, X., Xu, J., Ebako, J., Jiang, L., Su, S., Hu, S., et al. (2022) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2022.106415 · Cited by 254
Biofuels and renewable chemicals production by catalytic pyrolysis of cellulose: a review
Hassan, N. S., Jalil, A. A., Hitam, C. N. C., Vo, D. V. N., & Nabgan, W. (2020) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01040-7 · Cited by 176
Catalytic co-pyrolysis of biomass and waste plastics as a route to upgraded bio-oil
Dyer, A. C., Nahil, M. A., & Williams, P. T. (2021) · Journal of the Energy Institute · doi:10.1016/j.joei.2021.03.022 · Cited by 159
Ryu, H. W., Lee, H. W., Jae, J., & Park, Y.-K. (2019) · Energy · doi:10.1016/j.energy.2019.05.015 · Cited by 103
Self-citationPark, Y.-K., Jung, J., Ryu, S., Lee, H. W., Siddiqui, M. Z., Jae, J., Watanabe, A., & Kim, Y.-M. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.05.088 · Cited by 81
Self-citation
Metadata
- Authors
- Kim, B.-S., Kim, Y.-M., Lee, H. W., Jae, J., Kim, D. H., Jung, S.-C., Watanabe, C., & Park, Y.-K.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-01-28
- Volume
- 4
- Issue
- 3
- Pages
- 1354-1363
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2237157004
- Cited by
- 143
- References
- 5
- FWCI
- 8.82
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.