The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
Base-Catalyzed Depolymerization of Biorefinery Lignins
Open accessAbstract
Abstract Lignocellulosic biorefineries will produce a substantial pool of lignin-enriched residues, which are currently slated to be burned for heat and power. Going forward, however, valorization strategies for residual solid lignin will be essential to the economic viability of modern biorefineries. To achieve these strategies, effective lignin depolymerization processes will be required that can convert specific lignin-enriched biorefinery substrates into products of sufficient value and market size. Base-catalyzed depolymerization (BCD) of lignin using sodium hydroxide and other basic media has been shown to be an effective depolymerization approach when using technical and isolated lignins relevant to the pulp and paper industry. To gain insights in the application of BCD to lignin-rich, biofuels-relevant residues, here we apply BCD with sodium hydroxide at two catalyst loadings and temperatures of 270, 300, and 330 °C for 40 min to residual biomass from typical and emerging biochemical conversion processes. We obtained mass balances for each fraction from BCD, and characterized the resulting aqueous and solid residues using gel permeation chromatography, NMR, and GC–MS. When taken together, these results indicate that a significant fraction (45–78%) of the starting lignin-rich material can be depolymerized to low molecular weight, water-soluble species. The yield of the aqueous soluble fraction depends significantly on biomass processing method used prior to BCD. Namely, dilute acid pretreatment results in lower water-soluble yields compared to biomass processing that involves no acid pretreatment. Also, we find that the BCD product selectivity can be tuned with temperature to give higher yields of methoxyphenols at lower temperature, and a higher relative content of benzenediols with a greater extent of alkylation on the aromatic rings at higher temperature. Overall, this study shows that residual, lignin-rich biomass produced from conventional and emerging biochemical conversion processes can be depolymerized with sodium hydroxide to produce significant yields of low molecular weight aromatics that potentially can be upgraded to fuels or chemicals.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Features of promising technologies for pretreatment of lignocellulosic biomass
MOSIER, N. (2005) · Bioresource Technology · doi:10.1016/j.biortech.2004.06.025 · Cited by 6,251
The Catalytic Valorization of Lignin for the Production of Renewable Chemicals
Zakzeski, J., Bruijnincx, P. C. A., Jongerius, A. L., & Weckhuysen, B. M. (2010) · Chemical Reviews · doi:10.1021/cr900354u · Cited by 4,468
Catalytic conversion of biomass to biofuels
Alonso, D. M., Bond, J. Q., & Dumesic, J. A. (2010) · Green Chemistry · doi:10.1039/c004654j · Cited by 2,333
Lignin depolymerisation strategies: towards valuable chemicals and fuels
Xu, C., Arancon, R. A. D., Labidi, J., & Luque, R. (2014) · Chem. Soc. Rev. · doi:10.1039/c4cs00235k · Cited by 1,031
Deconstruction of Lignocellulosic Biomass to Fuels and Chemicals
Chundawat, S. P. S., Beckham, G. T., Himmel, M. E., & Dale, B. E. (2011) · Annual Review of Chemical and Biomolecular Engineering · doi:10.1146/annurev-chembioeng-061010-114205 · Cited by 1,017
Self-citation
Cited by
Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading
Schutyser, W., Renders, T., Van den Bosch, S., Koelewijn, S.-F., Beckham, G. T., & Sels, B. F. (2018) · Chemical Society Reviews · doi:10.1039/c7cs00566k · Cited by 2,552
Self-citationFrom lignin to valuable products–strategies, challenges, and prospects
Wang, H., Pu, Y., Ragauskas, A., & Yang, B. (2019) · Bioresource Technology · doi:10.1016/j.biortech.2018.09.072 · Cited by 922
Recent Advances in the Catalytic Depolymerization of Lignin towards Phenolic Chemicals: A Review
Liu, X., Bouxin, F. P., Fan, J., Budarin, V. L., Hu, C., & Clark, J. H. (2020) · ChemSusChem · doi:10.1002/cssc.202001213 · Cited by 390
Catalytic oxidation of lignin to valuable biomass-based platform chemicals: A review
Liu, C., Wu, S., Zhang, H., & Xiao, R. (2019) · Fuel Processing Technology · doi:10.1016/j.fuproc.2019.04.007 · Cited by 310
Hydrothermal liquefaction of lignin to aromatic chemicals: impact of lignin structure
Cao, Y., Zhang, C., Tsang, D. C. W., Fan, J., Clark, J. H., & Zhang, S. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c01617 · Cited by 128
Metadata
- Authors
- Katahira, R., Mittal, A., McKinney, K., Chen, X., Tucker, M. P., Johnson, D. K., & Beckham, G. T.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-02-05
- Volume
- 4
- Issue
- 3
- Pages
- 1474-1486
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2232879065
- Cited by
- 221
- References
- 5
- FWCI
- 10.34
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Base-Catalyzed Depolymerization of Biorefinery Lignins. https://app.cochat.ai/papers/10.1021/acssuschemeng.5b01451
- The paper
- Katahira, R., Mittal, A., McKinney, K., Chen, X., Tucker, M. P., Johnson, D. K., & Beckham, G. T. (2016). Base-Catalyzed Depolymerization of Biorefinery Lignins. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.5b01451
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.