Perspective on Polylactic Acid (PLA) based Sustainable Materials for Durable Applications: Focus on Toughness and Heat Resistance
Open accessThe DOI matches its Crossref record; 149 of the 149 references it cites were found in a registry or an index.
Abstract
Evolution of the bioplastics industry has changed directions dramatically since the early 1990s. The latest generation is moving toward durable bioplastics having high biobased content. The main objective is to replace “fossil carbon” with “renewable carbon”, a holistic strategy to mitigate climate change by minimizing the environmental impact of a product throughout its life cycle. Durable bioplastics is desired for multiuse long-term application in automotive, electronics and other industries. One necessary requirement for them is to be both tough and strong, yet the two attributes are often mutually exclusive. Does this mean a biobased and biodegradable polymer as polylactic acid (PLA) with its high strength but low toughness cannot be adopted for durable applications? Well, not exactly; this is where the concept of tailoring the properties of PLA to achieve stiffness–toughness balance along with acceptable heat resistance comes into play. In this perspective, we summarize the recent research progress in addressing the toughness vs strength and heat resistance conflict inherent in PLA. Blends having super toughness and composites based on the toughened PLA blends formulated to obtain desired material properties are covered. Morphology and crystallinity that individually contribute to toughness and heat resistance have also been elucidated.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
An Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Mohanty, A. K., Misra, M., & Drzal, L. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021013921916 · Cited by 2,151
Self-citationPhase structure and adhesion in polymer blends: A criterion for rubber toughening
Wu, S. (1985) · Polymer · doi:10.1016/0032-3861(85)90015-1 · Cited by 1,426
Formation of dispersed phase in incompatible polymer blends: Interfacial and rheological effects
Wu, S. (1987) · Polymer Engineering & Science · doi:10.1002/pen.760270506 · Cited by 1,117
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Anderson, K., Schreck, K., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834216 · Cited by 600
Sinha Ray, S., Yamada, K., Okamoto, M., & Ueda, K. (2003) · Polymer · doi:10.1016/s0032-3861(02)00818-2 · Cited by 566
Improving mechanical performance of injection molded PLA by controlling crystallinity
Harris, A. M., & Lee, E. C. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27261 · Cited by 545
New Polylactide/Layered Silicate Nanocomposites. 3. High-Performance Biodegradable Materials
Sinha Ray, S., Yamada, K., Okamoto, M., Ogami, A., & Ueda, K. (2003) · Chemistry of Materials · doi:10.1021/cm020953r · Cited by 453
Chain structure, phase morphology, and toughness relationships in polymers and blends
Wu, S. (1990) · Polymer Engineering & Science · doi:10.1002/pen.760301302 · Cited by 453
Mechanical properties of PLA composites with man-made cellulose and abaca fibres
Bledzki, A. K., Jaszkiewicz, A., & Scherzer, D. (2009) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2009.01.002 · Cited by 400
Super-tough poly(lactic acid) materials: Reactive blending with ethylene copolymer
Oyama, H. T. (2009) · Polymer · doi:10.1016/j.polymer.2008.12.025 · Cited by 393
Toughening of Polylactide by Melt Blending with a Biodegradable Poly(ether)urethane Elastomer
Li, Y., & Shimizu, H. (2007) · Macromolecular Bioscience · doi:10.1002/mabi.200700027 · Cited by 371
Zhang, K., Mohanty, A. K., & Misra, M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3004522 · Cited by 335
Self-citationLiu, H., Chen, F., Liu, B., Estep, G., & Zhang, J. (2010) · Macromolecules · doi:10.1021/ma101108g · Cited by 323
Liu, H., Song, W., Chen, F., Guo, L., & Zhang, J. (2011) · Macromolecules · doi:10.1021/ma1026934 · Cited by 317
Polymer toughness and impact resistance
Perkins, W. G. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11632 · Cited by 296
Compatibilization strategies in poly(lactic acid)-based blends
Zeng, J.-B., Li, K.-A., & Du, A.-K. (2015) · RSC Advances · doi:10.1039/c5ra01655j · Cited by 290
Polylactide. II. Viscosity–molecular weight relationships and unperturbed chain dimensions
Schindler, A., & Harper, D. (1979) · Journal of Polymer Science: Polymer Chemistry Edition · doi:10.1002/pol.1979.170170831 · Cited by 278
Improvement on the properties of polylactic acid (PLA) using bamboo charcoal particles
Ho, M.-P., Lau, K.-T., Wang, H., & Hui, D. (2015) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2015.05.048 · Cited by 268
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Zhang, K., Nagarajan, V., Misra, M., & Mohanty, A. K. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502337u · Cited by 267
Self-citationA Study on Biocomposites from Recycled Newspaper Fiber and Poly(lactic acid)
Huda, M. S., Drzal, L. T., Misra, M., Mohanty, A. K., Williams, K., & Mielewski, D. F. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0488849 · Cited by 265
Self-citationStructure-properties of super-tough PLA alloy with excellent heat resistance
Hashima, K., Nishitsuji, S., & Inoue, T. (2010) · Polymer · doi:10.1016/j.polymer.2010.06.045 · Cited by 256
Harada, M., Ohya, T., Iida, K., Hayashi, H., Hirano, K., & Fukuda, H. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.26717 · Cited by 254
Melt preparation and nucleation efficiency of polylactide stereocomplex crystallites
Anderson, K. S., & Hillmyer, M. A. (2006) · Polymer · doi:10.1016/j.polymer.2006.01.062 · Cited by 253
Herrera, N., Mathew, A. P., & Oksman, K. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.11.012 · Cited by 246
Ojijo, V., Sinha Ray, S., & Sadiku, R. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am400482f · Cited by 245
Chen, Y., Yuan, D., & Xu, C. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5004766 · Cited by 233
Nagarajan, V., Zhang, K., Misra, M., & Mohanty, A. K. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b01145 · Cited by 232
Self-citationHuda, M. S., Drzal, L. T., Mohanty, A. K., & Misra, M. (2007) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2006.06.010 · Cited by 229
Self-citationCrystallization Behavior of Carbon Nanotube−Polylactide Nanocomposites
Barrau, S., Vanmansart, C., Moreau, M., Addad, A., Stoclet, G., Lefebvre, J.-M., & Seguela, R. (2011) · Macromolecules · doi:10.1021/ma200842n · Cited by 229
Polylactide-Based Renewable Green Composites from Agricultural Residues and Their Hybrids
Nyambo, C., Mohanty, A. K., & Misra, M. (2010) · Biomacromolecules · doi:10.1021/bm1003114 · Cited by 224
Self-citationMa, P., Hristova-Bogaerds, D. G., Goossens, J. G. P., Spoelstra, A. B., Zhang, Y., & Lemstra, P. J. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.10.015 · Cited by 223
Kenaf‐fiber‐reinforced poly(lactic acid) used for electronic products
Serizawa, S., Inoue, K., & Iji, M. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.23377 · Cited by 221
Control of Crystal Morphology in Poly(l-lactide) by Adding Nucleating Agent
Bai, H., Zhang, W., Deng, H., Zhang, Q., & Fu, Q. (2011) · Macromolecules · doi:10.1021/ma102439t · Cited by 221
Miscibility and phase structure of binary blends of polylactide and poly(methyl methacrylate)
Zhang, G., Zhang, J., Wang, S., & Shen, D. (2003) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.10353 · Cited by 205
Liu, G.-C., He, Y.-S., Zeng, J.-B., Li, Q.-T., & Wang, Y.-Z. (2014) · Biomacromolecules · doi:10.1021/bm5012739 · Cited by 205
Su, Z., Li, Q., Liu, Y., Hu, G.-H., & Wu, C. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.04.028 · Cited by 203
Kawamoto, N., Sakai, A., Horikoshi, T., Urushihara, T., & Tobita, E. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25109 · Cited by 201
Isothermal cold crystallization kinetics of polylactide/nucleating agents
Liao, R., Yang, B., Yu, W., & Zhou, C. (2007) · Journal of Applied Polymer Science · doi:10.1002/app.25733 · Cited by 199
Wu, S. (1992) · Polymer International · doi:10.1002/pi.4990290313 · Cited by 196
Effect of Polylactide Stereocomplex on the Crystallization Behavior of Poly(l-lactic acid)
Rahman, N., Kawai, T., Matsuba, G., Nishida, K., Kanaya, T., Watanabe, H., Okamoto, H., Kato, M., Usuki, A., Matsuda, M., et al. (2009) · Macromolecules · doi:10.1021/ma900004d · Cited by 194
Kfoury, G., Raquez, J.-M., Hassouna, F., Odent, J., Toniazzo, V., Ruch, D., & Dubois, P. (2013) · Frontiers in Chemistry · doi:10.3389/fchem.2013.00032 · Cited by 182
Ojijo, V., & Ray, S. S. (2015) · Polymer · doi:10.1016/j.polymer.2015.10.038 · Cited by 179
Sun, Y., Yang, L., Lu, X., & He, C. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05991c · Cited by 178
Thermoplastics and Thermoplastic Composites
(2018) · Elsevier eBooks · doi:10.1016/c2017-0-01099-6 · Cited by 178
Ostafinska, A., Fortelny, I., Nevoralova, M., Hodan, J., Kredatusova, J., & Slouf, M. (2015) · RSC Advances · doi:10.1039/c5ra21178f · Cited by 176
Petinakis, E., Yu, L., Edward, G., Dean, K., Liu, H., & Scully, A. D. (2009) · Journal of Polymers and the Environment · doi:10.1007/s10924-009-0124-0 · Cited by 174
Liu, Z., Luo, Y., Bai, H., Zhang, Q., & Fu, Q. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00816 · Cited by 165
Mobile amorphous phase fragility in semi-crystalline polymers: Comparison of PET and PLLA
Arnoult, M., Dargent, E., & Mano, J. F. (2007) · Polymer · doi:10.1016/j.polymer.2006.12.053 · Cited by 163
Fang, H., Jiang, F., Wu, Q., Ding, Y., & Wang, Z. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502735q · Cited by 161
Tang, Z., Zhang, C., Liu, X., & Zhu, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.34799 · Cited by 159
Effects of talc on the mechanical and thermal properties of polylactide
Yu, F., Liu, T., Zhao, X., Yu, X., Lu, A., & Wang, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36260 · Cited by 155
Meng, B., Deng, J., Liu, Q., Wu, Z., & Yang, W. M. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.10.009 · Cited by 153
Dong, W., Zou, B., Yan, Y., Ma, P., & Chen, M. (2013) · International Journal of Molecular Sciences · doi:10.3390/ijms141020189 · Cited by 153
In situ formed crosslinked polyurethane toughened polylactide
Liu, G., He, Y., Zeng, J., Xu, Y., & Wang, Y. (2013) · Polymer Chemistry · doi:10.1039/c3py01649h · Cited by 149
Physical and mechanical properties of poly( L ‐lactic acid) nucleated by dibenzoylhydrazide compound
Kawamoto, N., Sakai, A., Horikoshi, T., Urushihara, T., & Tobita, E. (2006) · Journal of Applied Polymer Science · doi:10.1002/app.25185 · Cited by 148
Wang, Y., Chen, K., Xu, C., & Chen, Y. (2015) · The Journal of Physical Chemistry B · doi:10.1021/acs.jpcb.5b06244 · Cited by 147
Toughening of polylactic acid: an overview of research progress
Krishnan, S., Pandey, P., Mohanty, S., & Nayak, S. K. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098698 · Cited by 147
Jiang, L., Liu, B., & Zhang, J. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900576f · Cited by 140
Yuan, D., Chen, Z., Xu, C., Chen, K., & Chen, Y. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00788 · Cited by 140
Tsuji, H., Takai, H., Fukuda, N., & Takikawa, H. (2006) · Macromolecular Materials and Engineering · doi:10.1002/mame.200500371 · Cited by 139
Effect of crystallinity and loading-rate on mode I fracture behavior of poly(lactic acid)
Park, S. D., Todo, M., Arakawa, K., & KOGANEMARU, M. (2006) · Polymer · doi:10.1016/j.polymer.2005.12.046 · Cited by 138
Wang, L., Wang, Y.-N., Huang, Z., & Weng, Y. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2014.10.011 · Cited by 131
Ganster, J., Fink, H., & Pinnow, M. (2005) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.09.005 · Cited by 127
Murariu, M., Ferreira, A. D. S., Pluta, M., Bonnaud, L., Alexandre, M., & Dúbois, P. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.07.055 · Cited by 122
Ojijo, V. O., Ray, S. S., & Sadiku, E. R. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am201850m · Cited by 114
Biodegradable Polylactide/Montmorillonite Nanocomposites
Ray, S. S., Yamada, K., Okamoto, M., & Ueda, K. (2003) · Journal of Nanoscience and Nanotechnology · doi:10.1166/jnn.2003.220 · Cited by 113
Lin, L., Deng, C., Lin, G., & Wang, Y. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.5b01177 · Cited by 110
Qiu, Z., & Li, Z. (2011) · Industrial & Engineering Chemistry Research · doi:10.1021/ie2019596 · Cited by 109
Crystalline properties of poly(L-lactic acid) composites filled with nanometer calcium carbonate
Liang, J., Zhou, L., Tang, C. Y., & Tsui, C. P. (2012) · Composites Part B Engineering · doi:10.1016/j.compositesb.2012.09.086 · Cited by 108
Li, X., Kang, H., Shen, J., Zhang, L., Nishi, T., Ito, K., Zhao, C., & Coates, P. D. (2014) · Polymer · doi:10.1016/j.polymer.2014.06.045 · Cited by 108
Wang, Y., Chiao, S., Hung, T. ‐., & Yang, S. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36920 · Cited by 96
Use of surface modified recycled rubber particles for toughening of epoxy polymers
Bagheri, R., Williams, M. A., & Pearson, R. A. (1997) · Polymer Engineering and Science · doi:10.1002/pen.11666 · Cited by 95
Polylactide toughening with epoxy‐functionalized grafted acrylonitrile–butadiene–styrene particles
Sun, S., Zhang, M., Zhang, H., & Zhang, X. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34111 · Cited by 94
High impact poly(lactic acid)/poly(ethylene octene) blends prepared by reactive blending
Feng, Y., Hu, Y., Yin, J., Zhao, G., & Jiang, W. J. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23265 · Cited by 92
Yuan, D., Xu, C., Chen, Z., & Chen, Y. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.07.004 · Cited by 91
Lu, X. H., Wei, X., Huang, J., Li, Y., Zhang, G., He, G., Wang, M., & Qu, J. (2014) · Industrial & Engineering Chemistry Research · doi:10.1021/ie503092w · Cited by 91
Xu, T., Zhang, A.-J., Zhao, Y., Han, Z., & Xue, L. (2015) · Polymer Testing · doi:10.1016/j.polymertesting.2015.05.009 · Cited by 90
Odent, J., Leclère, P., Raquez, J.-M., & Dubois, P. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.006 · Cited by 86
Murariu, M., Dechief, A.-L., Ramy-Ratiarison, R., Paint, Y., Raquez, J.-M., & Dubois, P. (2015) · Nanocomposites · doi:10.1179/2055033214y.0000000008 · Cited by 85
Yin, H., Wei, X., Bao, R., Dong, Q., Liu, Z., Yang, W. M., Xie, B., & Yang, M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500783s · Cited by 83
Ma, Q., Georgiev, G., & Cebe, P. (2011) · Polymer · doi:10.1016/j.polymer.2011.08.006 · Cited by 82
Taib, R. M., Ghaleb, Z. A. A., & Ishak, Z. A. M. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34884 · Cited by 82
Heat-Resistant Fully Bio-Based Nanocomposite Blends Based on Poly(lactic acid)
Nuzzo, A., Coiai, S., Carroccio, S. C., Dintcheva, N. T., Gambarotti, C., & Filippone, G. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201300051 · Cited by 81
Zhao, Q., Ding, Y. M., Yang, B., Ning, N., & Fu, Q. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.11.012 · Cited by 79
Toughening of polylactide by melt blending with methyl methacrylate–butadiene–styrene copolymer
Zhang, H., Liu, N., Ran, X., Han, C., Han, L., Zhuang, Y., & Dong, L. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.36952 · Cited by 78
Effect of the Recycling and Annealing on the Mechanical and Fracture Properties of Poly(Lactic Acid)
Nascimento, L., Gámez‐Pérez, J., Pérez, O. O. S., Velasco, J. I., Maspoch, M. L., & Urquiza, E. A. F. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0229-5 · Cited by 76
Liu, T., Yu, F., Yu, X., Zhao, X., Lu, A., & Wang, J. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.34995 · Cited by 72
Jandas, P. J., Mohanty, S., & Nayak, S. K. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400395s · Cited by 72
Gui, Z., Lu, C., & Cheng, S. (2012) · Polymer Testing · doi:10.1016/j.polymertesting.2012.08.011 · Cited by 70
Song, P., Wei, Z., Liang, J., Chen, G., & Zhang, W. (2011) · Polymer Engineering and Science · doi:10.1002/pen.22172 · Cited by 70
(2015) · Wiley eBooks · doi:10.1002/9783527656950 · Cited by 70
Guo, X., Zhang, J., & Huang, J. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.050 · Cited by 67
Fracture mechanism of toughened epoxy resin with bimodal rubber-particle size distribution
Chen, T. K., & Jan, Y. H. (1992) · Journal of Materials Science · doi:10.1007/bf02403652 · Cited by 67
Random aliphatic copolyesters as new biodegradable impact modifiers for polylactide materials
Odent, J., Raquez, J., Duquesne, E., & Dúbois, P. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.11.002 · Cited by 66
Odent, J., Habibi, Y., Raquez, J., & Dúbois, P. (2013) · Composites Science and Technology · doi:10.1016/j.compscitech.2013.05.003 · Cited by 66
Bledzki, A. K., Franciszczak, P., & Meljon, A. (2015) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.03.029 · Cited by 65
Bai, H., Bai, D., Xiu, H., Liu, H., Zhang, Q., Wang, K., Deng, H., Chen, F., Fu, Q., & Chiu, F. (2014) · RSC Advances · doi:10.1039/c4ra08823a · Cited by 64
Effects of reactive blending temperature on impact toughness of poly(lactic acid) ternary blends
Liu, H., Guo, L. Q., Guo, X., & Zhang, J. (2011) · Polymer · doi:10.1016/j.polymer.2011.12.036 · Cited by 62
Morphology and properties of the biosourced poly(lactic acid)/poly(ethylene oxide‐b‐amide‐12) blends
Han, L., Han, C., & Dong, L. (2012) · Polymer Composites · doi:10.1002/pc.22383 · Cited by 59
Ma, P., Xu, P., Liu, W., Zhai, Y., Dong, W., Zhang, Y., & Chen, M. (2015) · RSC Advances · doi:10.1039/c4ra14194f · Cited by 59
Wertz, J. T., Mauldin, T. C., & Boday, D. J. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5058713 · Cited by 58
Kang, H., Hu, X., Li, M., Zhang, L., Wu, Y., Ning, N., & Tian, M. (2015) · RSC Advances · doi:10.1039/c4ra17024e · Cited by 58
Xu, H. Y., Wang, L., Teng, C., & Yu, M. (2008) · Polymer Bulletin · doi:10.1007/s00289-008-0986-7 · Cited by 57
Tábi, T., Kovács, N. K., Sajó, I. E., Czigány, T., Hajba, S., & Kovács, J. G. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-4997-y · Cited by 53
Song, W., Liu, H., Chen, F., & Zhang, J. (2012) · Polymer · doi:10.1016/j.polymer.2012.03.050 · Cited by 52
Fracture mechanism of toughened epoxy resin with bimodal rubber-particle size distribution
Chen, T. K., & Jan, Y. H. (1992) · Journal of Materials Science · doi:10.1007/bf00553845 · Cited by 52
Vadori, R., Mohanty, A. K., & Misra, M. (2013) · Macromolecular Materials and Engineering · doi:10.1002/mame.201200274 · Cited by 51
Self-citationPolylactide (PLA) and Highly Filled PLA ‐ Calcium Sulfate Composites with Improved Impact Properties
Murariu, M., Ferreira, A. D. S., Duquesne, E., Bonnaud, L., & Dúbois, P. (2008) · Macromolecular Symposia · doi:10.1002/masy.200851201 · Cited by 46
Lin, L., Deng, C., & Wang, Y. (2015) · Polymers for Advanced Technologies · doi:10.1002/pat.3560 · Cited by 45
Liang, H., Hao, Y., Bian, J., Zhang, H., Dong, L., & Zhang, H. (2014) · Polymer Engineering and Science · doi:10.1002/pen.23893 · Cited by 45
Joziasse, C. A. P., Topp, M. D. C., Veenstra, H., Grijpma, D. W., & Pennings, A. J. (1994) · Polymer Bulletin · doi:10.1007/bf00296170 · Cited by 44
Kfoury, G., Raquez, J., Hassouna, F., Leclère, P. E. L. G., Toniazzo, V., Ruch, D., & Dúbois, P. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24085 · Cited by 44
Zhou, L., Zhao, G., Feng, Y., Yin, J., & Jiang, W. J. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.03.022 · Cited by 41
Enhancing the temperature stability of PLA by compounding strategies
Laske, S., Ziegler, W., Kainer, M., Wuerfel, J., & Holzer, C. (2015) · Polymer Engineering and Science · doi:10.1002/pen.24176 · Cited by 41
Salehiyan, R., Yussuf, A. A., Hanani, N. F., Hassan, A., & Akbari, A. (2013) · Journal of Elastomers & Plastics · doi:10.1177/0095244313489906 · Cited by 40
Han, Q., Wang, Y., Shao, C., Zheng, G., Li, Q., & Shen, C. (2013) · Journal of Composite Materials · doi:10.1177/0021998313502064 · Cited by 38
The Effect of Core–Shell Ratio of Acrylic Impact Modifier on Toughening PLA
Li, W., Zhang, Y., Wu, D., Li, Z., Zhang, H., Dong, L., Sun, S., Deng, Y., & Zhang, H. (2015) · Advances in Polymer Technology · doi:10.1002/adv.21632 · Cited by 38
Xu, T., Wang, Y., Han, Q., He, D., Li, Q., & Shen, C. (2014) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2014.910049 · Cited by 38
Study on flax fiber toughened poly (lactic acid) composites
Xia, X., Liu, W., Zhou, L., Liu, H., He, S., & Zhu, C. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42573 · Cited by 38
Mechanical and Thermal Properties of Toughened Poly(L-lactic) Acid and Lignin Blends
Mu, C., Xue, L., Zhu, J., et al. (2014) · BioResources · doi:10.15376/biores.9.3.5557-5566 · Cited by 37
Ye, S., Lin, T., Tjiu, W. W., Wong, P. K., & He, C. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.38568 · Cited by 36
Sis, A. L. M., Ibrahim, N. A., & Yunus, W. M. Z. W. (2012) · Iranian Polymer Journal · doi:10.1007/s13726-012-0108-0 · Cited by 36
Polylactide-Based Wood Plastic Composites Toughened with SBS
Qiang, T., Yu, D., Gao, H., et al. (2012) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2011.618518 · Cited by 34
Chow, W. S., Leu, Y. Y., & Ishak, Z. A. M. (2012) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2012.53 · Cited by 34
Study on Tough Blends of Polylactide and Acrylic Impact Modifier
Song, X., Chen, Y., Xu, Y., & Wang, C. (2014) · BioResources · doi:10.15376/biores.9.2.1939-1952 · Cited by 33
Effects of halloysite nanotubes on the performance of plasticized poly(lactic acid)‐based composites
Yeniova, C. E., Özkoç, G., & Yilmazer, Ü. (2015) · Polymer Composites · doi:10.1002/pc.23511 · Cited by 31
Taib, R. M., Hassan, H. M., & Ishak, Z. A. M. (2013) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2013.843709 · Cited by 30
Biomass Nippon Strategy—Why “Biomass Nippon” now?
Kuzuhara, Y. (2005) · Biomass and Bioenergy · doi:10.1016/j.biombioe.2004.06.014 · Cited by 29
A toughened PLA/Nanosilica composite obtained in the presence of epoxidized soybean oil
Xiong, Z., Dai, X., Na, H., Tang, Z., Zhang, R., & Zhu, J. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.41220 · Cited by 29
Effects of Metal Ion Type on Ionomer-Assisted Reactive Toughening of Poly(lactic acid)
Liu, H., Guo, X., Song, W., & Zhang, J. (2013) · Industrial & Engineering Chemistry Research · doi:10.1021/ie303317k · Cited by 27
Wu, J., Kuo, M. C., & Chen, C. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42378 · Cited by 26
Mechanical Properties and Morphology of Polylactide Composites with Acrylic Impact Modifier
Ge, X., George, S., Law, S., & Sain, M. M. (2011) · Journal of Macromolecular Science Part B · doi:10.1080/00222348.2011.557585 · Cited by 24
Impact property enhancement of poly (lactic acid) with different flexible copolymers
Likittanaprasong, N., Seadan, M., & Suttiruengwong, S. (2015) · IOP Conference Series: Materials Science and Engineering · doi:10.1088/1757-899x/87/1/012069 · Cited by 24
Highly Toughened Polylactide‐Based Materials through Melt‐Blending Techniques
Odent, J., Raquez, J., & Dúbois, P. (2015) · Wiley eBooks · doi:10.1002/9783527656950.ch10 · Cited by 23
Yang, J., Wang, C., Shao, K., Ding, G., Tao, Y., & Zhu, J. (2015) · Russian Journal of Physical Chemistry A · doi:10.1134/s0036024415110242 · Cited by 22
Baltazar‐y‐Jimenez, A., & Sain, M. M. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.35331 · Cited by 21
Reddy, J. P., Misra, M., & Mohanty, A. K. (2013) · Advances in Mechanical Engineering · doi:10.1155/2013/761840 · Cited by 20
Self-citationChow, W. S., Leu, Y. Y., & Ishak, Z. A. M. (2015) · Periodica Polytechnica Mechanical Engineering · doi:10.3311/ppme.8319 · Cited by 20
Odent, J., Raquez, J., Thomassin, J., Gloaguen, J. M., Lauro, F., Jérôme, C., Lefebvre, J., & Dúbois, P. (2015) · Nanocomposites · doi:10.1179/2055033215y.0000000005 · Cited by 14
Vachon, A., Pépin, K., Béland, O., et al. (2015) · Journal of Biobased Materials and Bioenergy · doi:10.1166/jbmb.2015.1507 · Cited by 13
Mechanical properties of poly( l ‐lactic acid) composites filled with mesoporous silica
Liang, J., & Li, F. (2015) · Polymer Composites · doi:10.1002/pc.23674 · Cited by 9
Nomai, J., Jarapanyacheep, R., & Jarukumjorn, K. (2015) · Macromolecular Symposia · doi:10.1002/masy.201400120 · Cited by 6
Bio-Acrylonitrile Butadiene Styrene (ABS): Creating a New Green Polymer Through Melt Blending
Vadori, R. (2012) · The Atrium (University of Guelph) · Cited by 1
Drumright, R. E., Gruber, P. R., & Henton, D. E. (2000) · Advanced Materials · doi:10.1002/1521-4095(200012)12:23<1841::aid-adma1841>3.0.co;2-e
Mohanty (2000) · doi:10.1002/(sici)1439-2054(20000301)276:1
Research works printed but not linked: 4
- United Nations conference on climate change. http://www.cop21.gouv.fr/en/ (accessed December 30, 2015).
- Brydson, 2000, Plastic Materials
- Yu, 2012, Effects of talc on the mechanical and thermal properties of polylactide, J. Appl. Polym. Sci., 125, E99, 10.1002/app.36260 · DOI
- Mohanty, 2000, Biofibres, biodegradable polymers and biocomposites: an overview, Macromol. Mater. Eng., 276, 1, 10.1002/(SICI)1439-2054(20000301)276:1<1::AID-MAME1>3.0.CO;2-W · doi:10.1002/(sici)1439-2054(20000301)276:1<1::aid-mame1>3.0.co;2-w
Cited by
Wu, F., Misra, M., & Mohanty, A. K. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101395 · Cited by 909
Self-citationPolylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Environmental impact of bioplastic use: A review
Atiwesh, G., Mikhael, A., Parrish, C. C., Banoub, J., & Le, T.-A. T. (2021) · Heliyon · doi:10.1016/j.heliyon.2021.e07918 · Cited by 569
Bio-Based Packaging: Materials, Modifications, Industrial Applications and Sustainability
Reichert, C. L., Bugnicourt, E., Coltelli, M.-B., Cinelli, P., Lazzeri, A., Canesi, I., Braca, F., Martínez, B. M., Alonso, R., Agostinis, L., et al. (2020) · Polymers · doi:10.3390/polym12071558 · Cited by 495
Super tough poly(lactic acid) blends: a comprehensive review
Zhao, X., Hu, H., Wang, X., Yu, X., Zhou, W., & Peng, S. (2020) · RSC Advances · doi:10.1039/d0ra01801e · Cited by 465
Metadata
- Authors
- Nagarajan, V., Mohanty, A. K., & Misra, M.
- Affiliations
- University of Guelph (CA)
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2016-05-17
- Volume
- 4
- Issue
- 6
- Pages
- 2899-2916
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2398495679
- Cited by
- 926
- References
- 149
- Citations by year
- 2026: 66 · 2025: 77 · 2024: 128 · 2023: 97 · 2022: 108 · 2021: 122 · 2020: 103 · 2019: 90 · 2018: 76 · 2017: 49 · 2016: 10
- FWCI
- 30.60
- Type
- journal article
- Language
- en
- Open access
- hybrid
- doi.org
- Locations
- ACS Sustainable Chemistry & Engineering (publishedVersion, other-oa)
- Funders
- Government of Canada (460372)
- Natural Sciences and Engineering Research Council of Canada (400322)
- Ontario Ministry of Agriculture, Food and Rural Affairs (200425)
- Ontario Ministry of Economic Development and Innovation (NA)
- Ontario Research Fund (050231, 050289)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- polylactic acid, toughness, heat resistance, stiffness-toughness balance, polymer composites, crystallinity, morphology (materials science), bio-based polymers, renewable carbon, automotive applications, electronic applications
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.