CoChat

Integrated Production of Aromatic Amines and N-Doped Carbon from Lignin via ex Situ Catalytic Fast Pyrolysis in the Presence of Ammonia over Zeolites

Xu, Lujiang, Yao, Qian, Zhang, Ying, Fu, Yao · 2017 · ACS Sustainable Chemistry & Engineering
Cited by 89

The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.

Abstract

Due to the irregular polymeric structure and carbon based inactive property, lignin valorization is very difficult. In this study we proposed a new route for lignin valorization by which aromatic amines can be directly produced from lignin by ex situ catalytic fast pyrolysis with ammonia over zeolite catalysts. Meanwhile, the obtained pyrolytic biochar can be activated to produce high surface area N-doped carbon for electrochemical application. Wheat straw lignin served as feed to optimize the pyrolysis conditions. MCM-41, β-zeolite, HZSM-5, HY, ZnO/HZSM-5, and ZnO/HY were screened, and ZnO/HZSM-5 (2 wt % Zn, Si/Al = 50) showed the optimal reactivity for producing aromatic amines due to the desired pore structure and acidity. Temperature, residence time, and ammonia content in the carrier gas displayed significant effects on the product distribution. The maximum yield of aromatic amines was obtained at moderate temperatures around 600 °C, 0.57 s, and 75% ammonia in the carrier gas. Under the optimized conditions, the total carbon yields of pyrolytic bio-oil and aromatic amines were 9.8% and 5.6%, respectively. The selectivity of aniline in the aromatic amines was up to 87.3%. Moreover, the pyrolysis byproduct, biochar, was further activated by KOH at 800 °C under ammonia atmosphere for producing N-doped carbon with high surface area. The pyrolytic biochar and N-doped carbon were characterized by elemental analysis, SEM, XRD, nitrogen adsorption–desorption, and XPS. Cyclic voltammetry (CV) and galvanostatic charge–discharge were employed to investigate the electrochemical performance of pyrolytic biochar and N-doped carbon. The specific capacitance of N-doped carbon reached about 128.4 F g –1 .

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1021/acssuschemeng.6b02542

Cites

5 of 5 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 89

Metadata

Authors
Xu, L., Yao, Q., Zhang, Y., & Fu, Y.
Venue
ACS Sustainable Chemistry & Engineering
Published
2017-03-13
Volume
5
Issue
4
Pages
2960-2969
ISSN
2168-0485 (ISSN-L)
OpenAlex
W2592806677
Cited by
89
References
5
FWCI
5.00
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.