The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Biobased Heat Resistant Epoxy Resin with Extremely High Biomass Content from 2,5-Furandicarboxylic Acid and Eugenol
Abstract
Preparing a biobased (biomass-based) high performance epoxy resin with extremely large biomass content is of great importance for sustainable development. Herein, a new epoxy resin with a precise structure, bis(2-methoxy-4-(oxiran-2-ylmethyl)phenyl)furan-2,5-dicarboxylate (EUFU-EP), was synthesized from two biobased green and low toxic compounds (2,5-furandicarboxylic acid and eugenol) and the biomass content of EUFU-EP is as large as 93.3%. In addition, a new biobased epoxy resin, EUFU-EP/MHHPA, was prepared by using methyl hexahydrophthalic anhydride (MHHPA) as the curing agent and 2-ethyl-4-methylimidazole as the curing accelerator. The curing reactivity and integrated performances including thermal and mechanical properties as well as flame retardancy of the cured resin were systematically researched and compared with those of petrochemical resource-based epoxy resin (DGEBA/MHHPA) consisting of commercial diglycidyl ether of bisphenol A (DGEBA), MHHPA and 2-ethyl-4-methylimidazole. Results show that EUFU-EP/MHHPA and DGEBA/MHHPA have similar curing reactivity, but cured EUFU-EP/MHHPA resin shows better thermal properties, rigidity, and flame retardancy than cured DGEBA/MHHPA resin. Specifically, the glass transition temperature ( T g ) of EUFU-EP/MHHPA resin is as high as 153.4 °C, the storage modulus at 50 °C increases by 19.8%; meanwhile, both peak heat release rate and total heat release reduce by 19.0%. The nature behind these outstanding integrated performances is attributed to the unique structure of EUFU-EP, which is not only rich in aromatic structure but also has a furan ring. The especially large biomass content and outstanding thermal, mechanical, and flame retarding performances clearly show that EUFU-EP resin has a great potential in actual applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Werpy, T., & Petersen, G. (2004) · doi:10.2172/15008859 · Cited by 3,201
Biobased Thermosetting Epoxy: Present and Future
Auvergne, R., Caillol, S., David, G., Boutevin, B., & Pascault, J.-P. (2014) · Chemical Reviews · doi:10.1021/cr3001274 · Cited by 1,159
Thermosetting (bio)materials derived from renewable resources: A critical review
Raquez, J.-M., Deléglise, M., Lacrampe, M.-F., & Krawczak, P. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.01.001 · Cited by 910
Vegetable oil-based polymeric materials: synthesis, properties, and applications
Xia, Y., & Larock, R. C. (2010) · Green Chemistry · doi:10.1039/c0gc00264j · Cited by 864
Biobased Amines: From Synthesis to Polymers; Present and Future
Froidevaux, V., Negrell, C., Caillol, S., Pascault, J.-P., & Boutevin, B. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00486 · Cited by 806
Endocrine disruptors and reproductive health: The case of bisphenol-A
Maffini, M. V., Rubin, B. S., Sonnenschein, C., & Soto, A. M. (2006) · Molecular and Cellular Endocrinology · doi:10.1016/j.mce.2006.04.033 · Cited by 630
Acute toxicity, mutagenicity, and estrogenicity of bisphenol‐A and other bisphenols
Chen, M., Ike, M., & Fujita, M. (2002) · Environmental Toxicology · doi:10.1002/tox.10035 · Cited by 508
Recent advances in bio‐based epoxy resins and bio‐based epoxy curing agents
Baroncini, E. A., Kumar Yadav, S., Palmese, G. R., & Stanzione, J. F. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44103 · Cited by 451
Yu, B., Shi, Y., Yuan, B., Qiu, S., Xing, W., Hu, W., Song, L., Lo, S., & Hu, Y. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06613h · Cited by 415
Luo, S., Shen, Y., Yu, S., Wan, Y., Liao, W.-H., Sun, R., & Wong, C.-P. (2017) · Energy & Environmental Science · doi:10.1039/c6ee03190k · Cited by 313
Cited by
Liu, J., Wang, S., Peng, Y., Zhu, J., Zhao, W., & Liu, X. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101353 · Cited by 418
Kucherov, F. A., Romashov, L. V., Galkin, K. I., & Ananikov, V. P. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.8b00971 · Cited by 319
Zhi, M., Yang, X., Fan, R., Yue, S., Zheng, L., Liu, Q., & He, Y. (2022) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2022.109976 · Cited by 314
Metadata
- Authors
- Miao, J.-T., Yuan, L., Guan, Q., Liang, G., & Gu, A.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-07-07
- Volume
- 5
- Issue
- 8
- Pages
- 7003-7011
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2657757347
- Cited by
- 254
- References
- 30
- FWCI
- 18.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Biobased Heat Resistant Epoxy Resin with Extremely High Biomass Content from 2,5-Furandicarboxylic Acid and Eugenol. https://app.cochat.ai/papers/10.1021/acssuschemeng.7b01222
- The paper
- Miao, J.-T., Yuan, L., Guan, Q., Liang, G., & Gu, A. (2017). Biobased Heat Resistant Epoxy Resin with Extremely High Biomass Content from 2,5-Furandicarboxylic Acid and Eugenol. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.7b01222
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.