The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Green Approaches To Engineer Tough Biobased Epoxies: A Review
Open accessAbstract
Abstract Epoxy resins possess a variety of excellent properties including adhesion, mechanical performance, electrical insulation and chemical resistance; however cured epoxy resin is brittle and typically petroleum based. Rising concerns about depletion of nonrenewable resources and climate change have resulted in attempts to find green alternatives for petroleum based materials and mitigate greenhouse gas emissions. The present review is aimed to discuss green approaches to overcome epoxy resins brittleness and deal with ongoing research strategies to make tough biobased epoxies. First, the key toughening modifiers such as rubbers, thermoplastics, nanofillers, dendritic and block copolymers are briefly discussed and pros and cons of each method are presented. Then, the studies that followed green approaches are thoroughly reviewed. The utilization of epoxidized vegetable oils, biobased hyperbranched polymers and biobased copolymers in epoxy matrix are discussed. The challenges for commercialization of biobased modifiers are assessed and the present and prospective status of research and development of the tough biobased epoxies are explored.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, J.-S., & Matyjaszewski, K. (1995) · Journal of the American Chemical Society · doi:10.1021/ja00125a035 · Cited by 4,622
Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications
Siqueira, G., Bras, J., & Dufresne, A. (2010) · Polymers · doi:10.3390/polym2040728 · Cited by 1,328
Nanotechnology and its applications in lignocellulosic composites, a mini review
Kamel, S. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.78 · Cited by 271
Cited by
Downstream processing of lignin derived feedstock into end products
Wong, S. S., Shu, R., Zhang, J., Liu, H., & Yan, N. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00134a · Cited by 528
Recent progress on natural fiber hybrid composites for advanced applications: A review
Mochane, M. J., Mokhena, T. C., Mokhothu, T. H., Mtibe, A., Sadiku, E. R., Ray, S. S., Ibrahim, I. D., & Daramola, O. O. (2019) · Express Polymer Letters · doi:10.3144/expresspolymlett.2019.15 · Cited by 410
Surface modifications of nanocellulose: From synthesis to high-performance nanocomposites
Ghasemlou, M., Daver, F., Ivanova, E. P., Habibi, Y., & Adhikari, B. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101418 · Cited by 327
Industrial Hemp Fibers: An Overview
Manaia, J. P., Manaia, A. T., & Rodriges, L. (2019) · Fibers · doi:10.3390/fib7120106 · Cited by 317
Sustainable biodegradable coatings for food packaging: challenges and opportunities
Jahangiri, F., Mohanty, A. K., & Misra, M. (2024) · Green Chemistry · doi:10.1039/d3gc02647g · Cited by 299
Self-citation
Metadata
- Authors
- Mashouf Roudsari, G., Mohanty, A. K., & Misra, M.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2017-09-25
- Volume
- 5
- Issue
- 11
- Pages
- 9528-9541
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2758232135
- Cited by
- 167
- References
- 3
- FWCI
- 8.23
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.