The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Recycling of Epoxy Thermoset and Composites via Good Solvent Assisted and Small Molecules Participated Exchange Reactions
Abstract
Thermosetting polymers and composites are a class of high-performance materials with significant industrial applications. However, recycling of thermosets and their filling matters are significantly challenging. Here, we propose a method to recycle epoxy thermosetting polymer and composites efficiently by a synergistic effect of a solvent mixture using a highly efficient organic catalyst at an ordinary pressure and mild temperatures. The anhydride-epoxy network depolymerization enabled by selective ester bond cleavage process is substantially enhanced by a good solvent assisted and alcohol participated transesterification reaction. The epoxy thermoset can be dissolved in 28 min with 50% mass loss, and 70 min with 95% mass loss at 170 °C under ambient pressure. We demonstrate that this method can be used to reclaim carbon fibers from industrial reinforced epoxy composite products and embedded metal parts from commercial electronic products with undiminished properties at a mild temperature (∼170 °C) under an ordinary pressure in a short time (1.5 h). Moreover, the decomposed epoxy oligomer can be reused as a reactive ingredient for the preparation of new epoxy materials with high strength and modulus. This work provides a new insight into the thermosets dissolution and recycling.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A Thermally Re-mendable Cross-Linked Polymeric Material
Chen, X., Dam, M. A., Ono, K., Mal, A., Shen, H., Nutt, S. R., Sheran, K., & Wudl, F. (2002) · Science · doi:10.1126/science.1065879 · Cited by 2,645
Recycling technologies for thermoset composite materials—current status
Pickering, S. J. (2006) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2005.05.030 · Cited by 1,278
Catalytic Control of the Vitrimer Glass Transition
Capelot, M., Unterlass, M. M., Tournilhac, F., & Leibler, L. (2012) · ACS Macro Letters · doi:10.1021/mz300239f · Cited by 1,206
Metal-Catalyzed Transesterification for Healing and Assembling of Thermosets
Capelot, M., Montarnal, D., Tournilhac, F., & Leibler, L. (2012) · Journal of the American Chemical Society · doi:10.1021/ja302894k · Cited by 1,198
A review of polymer dissolution
Miller-Chou, B. A., & Koenig, J. L. (2003) · Progress in Polymer Science · doi:10.1016/s0079-6700(03)00045-5 · Cited by 1,115
Carbon Fibers and Their Composites
Morgan, P. (2005) · CRC Press eBooks · doi:10.1201/9781420028744 · Cited by 1,038
Pimenta, S., & Pinho, S. T. (2011) · Waste Management · doi:10.1016/j.wasman.2010.09.019 · Cited by 967
Mouldable liquid-crystalline elastomer actuators with exchangeable covalent bonds
Pei, Z., Yang, Y., Chen, Q., Terentjev, E. M., Wei, Y., & Ji, Y. (2014) · Nature Materials · doi:10.1038/nmat3812 · Cited by 886
Ruiz de Luzuriaga, A., Martin, R., Markaide, N., Rekondo, A., Cabañero, G., Rodríguez, J., & Odriozola, I. (2016) · Materials Horizons · doi:10.1039/c6mh00029k · Cited by 886
Taynton, P., Ni, H., Zhu, C., Yu, K., Loob, S., Jin, Y., Qi, H. J., & Zhang, W. (2016) · Advanced Materials · doi:10.1002/adma.201505245 · Cited by 681
Self-citation
Cited by
Current status of carbon fibre and carbon fibre composites recycling
Zhang, J., Chevali, V. S., Wang, H., & Wang, C.-H. (2020) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2020.108053 · Cited by 866
Functional epoxy vitrimers and composites
Yang, Y., Xu, Y., Ji, Y., & Wei, Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100710 · Cited by 463
A Review on the Potential and Limitations of Recyclable Thermosets for Structural Applications
Post, W., Susa, A., Blaauw, R., Molenveld, K., & Knoop, R. J. I. (2020) · Polymer Reviews · doi:10.1080/15583724.2019.1673406 · Cited by 460
Liu, T., Zhao, B., & Zhang, J. (2020) · Polymer · doi:10.1016/j.polymer.2020.122392 · Cited by 364
Qin, B., Zhang, S., Sun, P., Tang, B., Yin, Z., Cao, X., Chen, Q., Xu, J., & Zhang, X. (2020) · Advanced Materials · doi:10.1002/adma.202000096 · Cited by 288
Closed-loop chemical recycling of thermosetting polymers and their applications: a review
Liu, Y., Yu, Z., Wang, B., Li, P., Zhu, J., & Ma, S. (2022) · Green Chemistry · doi:10.1039/d2gc00368f · Cited by 278
Recovery of epoxy thermosets and their composites
Zhao, X., Long, Y., Xu, S., Liu, X., Chen, L., & Wang, Y.-Z. (2023) · Materials Today · doi:10.1016/j.mattod.2022.12.005 · Cited by 273
Plastic Pollution: A Material Problem?
Millican, J. M., & Agarwal, S. (2021) · Macromolecules · doi:10.1021/acs.macromol.0c02814 · Cited by 261
Vitrimer composites: current status and future challenges
Schenk, V., Labastie, K., Destarac, M., Olivier, P., & Guerre, M. (2022) · Materials Advances · doi:10.1039/d2ma00654e · Cited by 253
Readily recyclable carbon fiber reinforced composites based on degradable thermosets: a review
Wang, B., Ma, S., Yan, S., & Zhu, J. (2019) · Green Chemistry · doi:10.1039/c9gc01760g · Cited by 246
Metadata
- Authors
- Kuang, X., Zhou, Y., Shi, Q., Wang, T., & Qi, H. J.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2018-05-29
- Volume
- 6
- Issue
- 7
- Pages
- 9189-9197
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2807052218
- Cited by
- 272
- References
- 38
- FWCI
- 12.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.