CoChat

A New Approach to Kinetic Modeling of Biomass Hydrothermal Carbonization

Gallifuoco, Alberto · 2019 · ACS Sustainable Chemistry & Engineering

The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.

Abstract

This study proposes to model hydrothermal carbonization describing the reactions stochastically. A procedure is set up for handling batch reaction data and deducing the probability distributions required for analyzing the process statistically. The progressive formation of the hydrochar and the evolution over time of its composition are connected to the dynamics of Markov processes. The transition probability functions, which rule the solid/liquid reactions, are obtained. The matrix algebra required to evaluate the dynamics of the reacting system is developed. The method furnishes valuable information for the optimization of the industrial reactors. The technique is tested with data concerning batch reactions of both lignocellulosic and agro-food residual biomass carried out at 200 °C, up to 120 min, and at fixed 7:1 water to solid ratio. The model testing also used additional data from the literature. In any case, the accordance between stochastic calculations and experimental data is good. The proposed modeling approach could help to steer the selection of the optimal kinetic pattern among those debated in the literature. The method, fruitful of developments and potentially applicable to the other hydrothermal conversion processes, represents an additional tool for modeling the hydrothermal carbonization.

Overview

Integrity signals

Registry

Crossref · 10.1021/acssuschemeng.9b02191

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 36 references

Research works printed but not linked: 2

  1. 10.2307/3212214 · doi:10.2307/3212214 · Paper page
  2. Dadach, Z. E. Mechanism of depolymerization of cellulose in low sulfuric acid medium: kinetic investigation and stochastic simulation . Ph.D. thesis, Laval University, 1994, ISBN: 3668628785.

Cited by

See all 24

Metadata

Authors
Gallifuoco, A.
Affiliations
University of L'Aquila (IT)
Corresponding author
Gallifuoco, Alberto
Venue
ACS Sustainable Chemistry & Engineering
Published
2019-07-15
Volume
7
Issue
15
Pages
13073-13080
ISSN
2168-0485 (ISSN-L)
OpenAlex
W2958896136
Cited by
24
References
36
Citations by year
2026: 1 · 2025: 2 · 2024: 2 · 2023: 3 · 2022: 2 · 2021: 8 · 2020: 5 · 2019: 1
FWCI
1.41
Type
journal article
Language
en
Open access
closed
Locations
  • ACS Sustainable Chemistry & Engineering (publishedVersion)
  • Archivio Istituzionale della Ricerca - Università degli Studi dell Aquila (submittedVersion)
Topics
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
  • Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
Keywords
hydrothermal carbonization, kinetic modeling, stochastic modeling, Markov processes, transition probability function, matrix algebra, lignocellulosic biomass, reactor design optimization

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.