CoChat

Hydrothermal Carbonization Kinetics of Lignocellulosic Agro-Wastes: Experimental Data and Modeling

Open access

The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.

Abstract

Olive trimmings (OT) were used as feedstock for an in-depth experimental study on the reaction kinetics controlling hydrothermal carbonization (HTC). OT were hydrothermally carbonized for a residence time τ of up to 8 h at temperatures between 180 and 250 °C to systematically investigate the chemical and energy properties changes of hydrochars during HTC. Additional experiments at 120 and 150 °C at τ = 0 h were carried out to analyze the heat-up transient phase required to reach the HTC set-point temperature. Furthermore, an original HTC reaction kinetics model was developed. The HTC reaction pathway was described through a lumped model, in which biomass is converted into solid (distinguished between primary and secondary char), liquid, and gaseous products. The kinetics model, written in MATLABTM, was used in best fitting routines with HTC experimental data obtained using OT and two other agro-wastes previously tested: grape marc and Opuntia Ficus Indica. The HTC kinetics model effectively predicts carbon distribution among HTC products versus time with the thermal transient phase included; it represents an effective tool for R&D in the HTC field. Importantly, both modeling and experimental data suggest that already during the heat-up phase, biomass greatly carbonizes, in particular at the highest temperature tested of 250 °C.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/en12030516

Cites

59 of 59 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 ( a ) Heating time (transient time) of olive trimmings from ambient temperature to 250 °C hydrothermal carbonization (HTC) temperature; ( b ) temperature trends vs. time of hydrothermal tests conducted at 120, 150, 180, 220, 250 °C at 0 h residence time. Figure 1. ( a ) Heating time (transient time) of olive trimmings from ambient temperature to 250 ◦ C hydrothermal carbonization (HTC) temperature; ( b ) temperature trends vs. time of hydrothermal tests conducted at 120, 150, 180, 220, 250 ◦ C at 0 h residence time.
Figure 1 ( a ) Heating time (transient time) of olive trimmings from ambient temperature to 250 °C hydrothermal carbonization (HTC) temperature; ( b ) temperature trends vs. time of hydrothermal tests conducted at 120, 150, 180, 220, 250 °C at 0 h residence time. Figure 1. ( a ) Heating time (transient time) of olive trimmings from ambient temperature to 250 ◦ C hydrothermal carbonization (HTC) temperature; ( b ) temperature trends vs. time of hydrothermal tests conducted at 120, 150, 180, 220, 250 ◦ C at 0 h residence time.CC-BY · From the PDF
Figure 2 Simplified HTC reaction path used in the model [50].
Figure 2 Simplified HTC reaction path used in the model [50].CC-BY · From the PDF
Figure 3 Transient time: ( a ) hydrochar yield, energy yield, and HHV vs temperature; ( b ) element recovery in the hydrochar vs temperature; and ( c ) proximate analysis data vs temperature. Figure 3. Transient time: ( a ) hydrochar yield, energy yield, and HHV vs. temperature; ( b ) element recovery in the hydrochar vs. temperature; and ( c ) proximate analysis data vs temperature.
Figure 3 Transient time: ( a ) hydrochar yield, energy yield, and HHV vs temperature; ( b ) element recovery in the hydrochar vs temperature; and ( c ) proximate analysis data vs temperature. Figure 3. Transient time: ( a ) hydrochar yield, energy yield, and HHV vs. temperature; ( b ) element recovery in the hydrochar vs. temperature; and ( c ) proximate analysis data vs temperature.CC-BY · From the PDF
Figure 4 Carbon recovery in solid and gas for olive trimmings: ( a ) 180 °C, ( b ) 220 °C, and ( c ) 250 °C. Figure 4. Carbon recovery in solid and gas for olive trimmings: ( a ) 180 ◦ C, ( b ) 220 ◦ C, and ( c ) 250 ◦ C. and secondary char formation, as well as of the gas production from the solid and liquid phases.
Figure 4 Carbon recovery in solid and gas for olive trimmings: ( a ) 180 °C, ( b ) 220 °C, and ( c ) 250 °C. Figure 4. Carbon recovery in solid and gas for olive trimmings: ( a ) 180 ◦ C, ( b ) 220 ◦ C, and ( c ) 250 ◦ C. and secondary char formation, as well as of the gas production from the solid and liquid phases.CC-BY · From the PDF
Figure 5 Carbon recovery (-) into HTC products versus residence time (h) for olive trimmings: ( a ) 180 °C, ( b ) 220 °C, and ( c ) 250 °C. Figure 5. Carbon recovery (-) into HTC products versus residence time (h) for olive trimmings: ( a ) 180 ◦ C, ( b ) 220 ◦ C, and ( c ) 250 ◦ C.
Figure 5 Carbon recovery (-) into HTC products versus residence time (h) for olive trimmings: ( a ) 180 °C, ( b ) 220 °C, and ( c ) 250 °C. Figure 5. Carbon recovery (-) into HTC products versus residence time (h) for olive trimmings: ( a ) 180 ◦ C, ( b ) 220 ◦ C, and ( c ) 250 ◦ C.CC-BY · From the PDF
Figure 6 Arrhenius plot for determination of the activation energies (Ea,i) and pre-exponential factors (k0,i ): ( a ) olive trimmings, ( b ) grape marc, and ( c ) Opuntia ficus indica cladodes. Figure 6. Arrhenius plot for determination of the activation energies (Ea,i ) and pre-exponential factors (k0,i ): ( a ) olive trimmings, ( b ) grape marc, and ( c ) Opuntia ficus indica cladodes.
Figure 6 Arrhenius plot for determination of the activation energies (Ea,i) and pre-exponential factors (k0,i ): ( a ) olive trimmings, ( b ) grape marc, and ( c ) Opuntia ficus indica cladodes. Figure 6. Arrhenius plot for determination of the activation energies (Ea,i ) and pre-exponential factors (k0,i ): ( a ) olive trimmings, ( b ) grape marc, and ( c ) Opuntia ficus indica cladodes.CC-BY · From the PDF
Figure A1. Carbon recovery in solid and gas phases for grape marc: ( a ) 180 °C, ( b ) 220 °C, and ( c ) 250 °C. Figure A1. Carbon recovery in solid and gas phases for grape marc: ( a ) 180 ◦ C, ( b ) 220 ◦ C, and ( c ) 250 ◦ C.
Figure A1. Carbon recovery in solid and gas phases for grape marc: ( a ) 180 °C, ( b ) 220 °C, and ( c ) 250 °C. Figure A1. Carbon recovery in solid and gas phases for grape marc: ( a ) 180 ◦ C, ( b ) 220 ◦ C, and ( c ) 250 ◦ C.CC-BY · From the PDF
Figure A2. Carbon recovery in solid and gas phases for Opuntia ficus indica : ( a ) 180 °C, ( b ) 220 °C, and ( c ) 250 °C. Figure A2. Carbon recovery in solid and gas phases for Opuntia ficus indica : ( a ) 180 ◦ C, ( b ) 220 ◦ C, and ( c ) 250 ◦ C.
Figure A2. Carbon recovery in solid and gas phases for Opuntia ficus indica : ( a ) 180 °C, ( b ) 220 °C, and ( c ) 250 °C. Figure A2. Carbon recovery in solid and gas phases for Opuntia ficus indica : ( a ) 180 ◦ C, ( b ) 220 ◦ C, and ( c ) 250 ◦ C.CC-BY · From the PDF
Image 9
CC-BY · From the PDF
Figure A4. Arrhenius plot for determination of the activation energies (Ea,i) and pre-exponential factors (k0,i) for olive trimmings, fixing n = 1. Figure A4. Arrhenius plot for determination of the activation energies (Ea,i) and pre-exponential factors (k0,i) for olive trimmings, fixing n = 1. Figure A4. Arrhenius plot for determination of the activation energies (Ea,i ) and pre-exponential factors (k0,i ) for olive trimmings, fixing n = 1.
Figure A4. Arrhenius plot for determination of the activation energies (Ea,i) and pre-exponential factors (k0,i) for olive trimmings, fixing n = 1. Figure A4. Arrhenius plot for determination of the activation energies (Ea,i) and pre-exponential factors (k0,i) for olive trimmings, fixing n = 1. Figure A4. Arrhenius plot for determination of the activation energies (Ea,i ) and pre-exponential factors (k0,i ) for olive trimmings, fixing n = 1.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 59 references

Research works printed but not linked: 1

  1. Tascón, J.M.D. (2012). Hydrothermal Carbons: Synthesis, Characterization, and Applications. Novel Carbon Adsorbents, Elsevier Ltd.

Cited by

See all 100

Metadata

Authors
Lucian, M., Volpe, M., & Fiori, L.
Affiliations
University of Trento (IT)
Corresponding author
Fiori, Luca
Venue
Energies
Publisher
MDPI AG
Published
2019-02-06
Volume
12
Issue
3
Pages
516
ISSN
1996-1073 (ISSN-L)
OpenAlex
W2913511786
Cited by
98
References
59
Citations by year
2026: 10 · 2025: 9 · 2024: 10 · 2023: 12 · 2022: 18 · 2021: 17 · 2020: 18 · 2019: 4
FWCI
5.02
Type
journal article
Language
en
Open access
Locations
  • Energies (publishedVersion, cc-by)
  • Institutional Research Information System (Università degli Studi di Trento) (submittedVersion, cc-by)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Energy › Fuel Technology › Thermochemical Biomass Conversion Processes
  • Physical Sciences › Materials Science › Materials Chemistry › Thermal and Kinetic Analysis
  • Physical Sciences › Engineering › Biomedical Engineering › Biofuel production and bioconversion
Keywords
hydrothermal carbonization, reaction kinetics, hydrochar, lumped kinetic model, grape pomace, Opuntia ficus-indica, carbon distribution, biomass conversion, residence time

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Hydrothermal Carbonization Kinetics of Lignocellulosic Agro-Wastes: Experimental Data and Modeling. https://app.cochat.ai/papers/10.3390/en12030516
The paper
Lucian, M., Volpe, M., & Fiori, L. (2019). Hydrothermal Carbonization Kinetics of Lignocellulosic Agro-Wastes: Experimental Data and Modeling. Energies. https://doi.org/10.3390/en12030516

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.