The DOI matches its Crossref record; 4 of the 4 references it cites were found in a registry or an index.
Wearable Single-Electrode-Mode Triboelectric Nanogenerator via Conductive Polymer-Coated Textiles for Self-Power Electronics
Abstract
Flexible and interlaced-designed triboelectric nanogenerators (TENGs) are acquiring enormous research interest due to their facile fabrication techniques and easy employment as a power source for wearable/portable electronic devices. Herein, we proposed polypyrrole (PPy)-based flexible and wearable TENGs with excellent electrical output performance and robustness. The flexible interlaced microfibrous mesh cotton fabric was used as a support frame to deposit PPy by an in situ chemical polymerization process. Such PPy-coated cotton textile ( [email protected] ) was utilized as an electrode to construct a single-electrode-mode TENG. Furthermore, a sandpaper-assisted microtextured polydimethylsiloxane layer was developed on the top of [email protected] via a simple soft-imprint lithography technique, and it was employed as a tribo-negative friction layer of TENG. The resultant PPy-based wearable single-electrode-mode TENG (PPy-WSEM-TENG) device can efficiently convert the mechanical energy into electricity while making continuous contacts/separations with counter friction objects like dialysis cellulose membrane and human skin (i.e., tribo-positive friction layers). Moreover, the influence of an external pressing force and load resistance on the electrical output performance of PPy-WSEM-TENG was analyzed. This device exhibited robust characteristics even after long-term cyclic operations and also generated an electrical output by gently touching with the human hand. For commercial applications, the as-fabricated PPy-WSEM-TENG was effectively employed as a self-powered source to drive portable electronic devices as well as light-emitting diodes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wang, Z. L. (2014) · Faraday Discuss. · doi:10.1039/c4fd00159a · Cited by 1,749
Conducting polymers in biomedical engineering
Guimard, N. K., Gomez, N., & Schmidt, C. E. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.012 · Cited by 1,599
Wearable and flexible sensors for user-interactive health-monitoring devices
Ha, M., Lim, S., & Ko, H. (2018) · Journal of Materials Chemistry B · doi:10.1039/c8tb01063c · Cited by 352
Energy autonomous electronic skin
García Núñez, C., Manjakkal, L., & Dahiya, R. (2019) · npj Flexible Electronics · doi:10.1038/s41528-018-0045-x · Cited by 332
Cited by
Smart Textiles for Electricity Generation
Chen, G., Li, Y., Bick, M., & Chen, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00821 · Cited by 931
Functional Fibers and Fabrics for Soft Robotics, Wearables, and Human–Robot Interface
Xiong, J., Chen, J., & Lee, P. S. (2021) · Advanced Materials · doi:10.1002/adma.202002640 · Cited by 627
Wearable triboelectric nanogenerators for biomechanical energy harvesting
Zou, Y., Raveendran, V., & Chen, J. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105303 · Cited by 351
Song, Y., Shi, Z., Hu, G.-H., Xiong, C., Isogai, A., & Yang, Q. (2021) · Journal of Materials Chemistry A · doi:10.1039/d0ta08642h · Cited by 318
Electrospun nanofiber based TENGs for wearable electronics and self-powered sensing
Babu, A., Aazem, I., Walden, R., Bairagi, S., Mulvihill, D. M., & Pillai, S. C. (2023) · Chemical Engineering Journal · doi:10.1016/j.cej.2022.139060 · Cited by 293
Metadata
- Authors
- Mule, A. R., Dudem, B., Patnam, H., Graham, S. A., & Yu, J. S.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-09-12
- Volume
- 7
- Issue
- 19
- Pages
- 16450-16458
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2972395679
- Cited by
- 161
- References
- 4
- FWCI
- 6.05
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Wearable Single-Electrode-Mode Triboelectric Nanogenerator via Conductive Polymer-Coated Textiles for Self-Power Electronics. https://app.cochat.ai/papers/10.1021/acssuschemeng.9b03629
- The paper
- Mule, A. R., Dudem, B., Patnam, H., Graham, S. A., & Yu, J. S. (2019). Wearable Single-Electrode-Mode Triboelectric Nanogenerator via Conductive Polymer-Coated Textiles for Self-Power Electronics. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.9b03629
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.