Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran over Alloyed Cu−Ni Encapsulated in Biochar Catalysts
The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Abstract
Alloyed Cu−Ni encapsulated in carbon was prepared by loading Ni and Cu onto biochar (BC) through an initial wetness impregnation method under mild conditions. The bimetallic catalysts were exploited to perform selective hydrodeoxygenation (HDO) of 5-hydroxymethylfurfural (HMF). 2,5-Dimethylfurfural (DMF), a promising liquid fuel/fuel additive, could be obtained from HMF with the highest yield of 93.5% under the optimized conditions. During HMF HDO, two key intermediates, 5-methylfurfural (MFF) and 2,5-dihydroxymethylfuran (DHMF), dominating two distinct conversion pathways were systematically investigated by Arrhenius kinetics analysis. In addition, the turnover frequencies (TOFs) of HDO reaction over Cu−Ni/BC corresponding with Cu amount were thoroughly discussed, finding that the electron transfer from Cu to Ni in the alloy structure was beneficial to the HDO reaction and the conversion pathways can be regulated by reaction temperature variation. Importantly, the synergy of HDO of HMF by alloyed Cu−Ni metal and Lewis acid sites from oxide NiO x were hence clarified by systematic catalyst characterizations. The Cu−Ni/BC catalyst is stable for at least five consecutive runs to obtain the stabilized 81.9% of DMF since the third run.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Scherrer equation versus the 'Debye-Scherrer equation'
Holzwarth, U., & Gibson, N. (2011) · Nature Nanotechnology · doi:10.1038/nnano.2011.145 · Cited by 3,407
Biochar for Environmental Management: Science, Technology and Implementation
(2015) · doi:10.4324/9780203762264 · Cited by 2,280
Development of biochar-based functional materials: toward a sustainable platform carbon material
Liu, W.-J., Jiang, H., & Yu, H.-Q. (2015) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00195 · Cited by 1,754
Cited by
Emerging heterogeneous catalysts for biomass conversion: studies of the reaction mechanism
Lin, L., Han, X., Han, B., & Yang, S. (2021) · Chemical Society Reviews · doi:10.1039/d1cs00039j · Cited by 269
Biochar as a support for nanocatalysts and other reagents: Recent advances and applications
Pereira Lopes, R., & Astruc, D. (2021) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2020.213585 · Cited by 257
Ramos, R., Abdelkader-Fernández, V. K., Matos, R., Peixoto, A. F., & Fernandes, D. M. (2022) · Catalysts · doi:10.3390/catal12020207 · Cited by 118
Bharath, G., Rambabu, K., Hai, A., Banat, F., Taher, H., Schmidt, J. E., & Show, P. L. (2020) · Energy Conversion and Management · doi:10.1016/j.enconman.2020.112859 · Cited by 70
Wang, X., Zhang, C., Jin, B., Liang, X., Wang, Q., Zhao, Z., & Li, Q. (2021) · Catalysis Science & Technology · doi:10.1039/d0cy01920h · Cited by 44
Metadata
- Authors
- Zhu, C., Wang, H., Li, H., Cai, B., Lv, W., Cai, C., Wang, C., Yan, L., Liu, Q., & Ma, L.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2019-10-07
- Volume
- 7
- Issue
- 24
- Pages
- 19556-19569
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2979588215
- Cited by
- 93
- References
- 3
- FWCI
- 3.48
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran over Alloyed Cu−Ni Encapsulated in Biochar Catalysts. https://app.cochat.ai/papers/10.1021/acssuschemeng.9b04645
- The paper
- Zhu, C., Wang, H., Li, H., Cai, B., Lv, W., Cai, C., Wang, C., Yan, L., Liu, Q., & Ma, L. (2019). Selective Hydrodeoxygenation of 5-Hydroxymethylfurfural to 2,5-Dimethylfuran over Alloyed Cu−Ni Encapsulated in Biochar Catalysts. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.9b04645
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.