Tunable Biomimetic Hydrogels from Silk Fibroin and Nanocellulose
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Biomimetic hydrogels offer a new platform for hierarchical structure-controlled, tough, biocompatible, mechanically tunable, and printable gels for regenerative medicine. Herein, we report for the first time the detailed effects of various kinds of nanocellulose, namely, bacterial nanocellulose, cellulose nanofibers, and cellulose nanocrystals on the morphology, structure–property relationship, and 3D printability of the photochemically cross-linked regenerated silk fibroin (RSF)/nanocellulose composite hydrogels. The hierarchical structure of fabricated biomimetic hydrogels was both qualitatively and quantitatively investigated by scanning electron microscopy and small/ultrasmall-angle neutron scattering, whereas their mechanical properties were assessed using rheology, tensile, and indentation tests. The micropore size and interhydrophobic domain distance of fabricated hydrogels were tuned in the range of 1.8–9.2 μm and 4.5–17.7 nm, respectively. The composite hydrogels exhibit superior viscoelastic, compressive, and tensile mechanical properties compared to pristine RSF hydrogel, where the shear storage modulus, compression modulus, young’s modulus, and tensile toughness were tuned in the range of 0.4–1.4, 1.3–3.6, 2.2–14.0 MPa, and 16.7–108.3 kJ/m 3, respectively. Moreover, the obtained mechanical modulus of the composite hydrogels in terms of shear, tensile, and compression are comparable to articular cartilage (0.4–1.6 MPa), native femoral artery (∼9.0 MPa), and human medial meniscus (∼1.0 MPa) tissues, respectively, which demonstrate their potential for a wide range of tissue engineering applications. The whisker form of nanocellulose was observed to enhance the printability of composite hydrogels, whereas the fiber form enhanced the overall toughness of the composite hydrogels and promoted the fibroblast cell attachment, viability, and proliferation. The results presented here have implications for both fundamental understanding and potential applications of RSF/nanocellulose composite hydrogels for 3D-printed scaffolds and tissue engineering.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cellulose-based hydrogels: Present status and application prospects
Chang, C., & Zhang, L. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2010.12.023 · Cited by 1,081
Dynamics of Cellulose Nanocrystal Alignment during 3D Printing
Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R. (2018) · ACS Nano · doi:10.1021/acsnano.8b02366 · Cited by 282
Cited by
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Relationship between Structure and Rheology of Hydrogels for Various Applications
Stojkov, G., Niyazov, Z., Picchioni, F., & Bose, R. K. (2021) · Gels · doi:10.3390/gels7040255 · Cited by 654
Understanding Nanocellulose–Water Interactions: Turning a Detriment into an Asset
Solhi, L., Guccini, V., Heise, K., Solala, I., Niinivaara, E., Xu, W., Mihhels, K., Kröger, M., Meng, Z., Wohlert, J., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00611 · Cited by 506
Additive Manufacturing of Polymer Materials: Progress, Promise and Challenges
Saleh Alghamdi, S., John, S., Roy Choudhury, N., & Dutta, N. K. (2021) · Polymers · doi:10.3390/polym13050753 · Cited by 469
Self-citationFunctional silk fibroin hydrogels: preparation, properties and applications
Zheng, H., & Zuo, B. (2021) · Journal of Materials Chemistry B · doi:10.1039/d0tb02099k · Cited by 374
Metadata
- Authors
- Dorishetty, P., Balu, R., Athukoralalage, S. S., Greaves, T. L., Mata, J., de Campo, L., Saha, N., Zannettino, A. C. W., Dutta, N. K., & Choudhury, N. R.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2020-01-23
- Volume
- 8
- Issue
- 6
- Pages
- 2375-2389
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W3001003361
- Cited by
- 132
- References
- 2
- FWCI
- 4.59
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Tunable Biomimetic Hydrogels from Silk Fibroin and Nanocellulose. https://app.cochat.ai/papers/10.1021/acssuschemeng.9b05317
- The paper
- Dorishetty, P., Balu, R., Athukoralalage, S. S., Greaves, T. L., Mata, J., de Campo, L., Saha, N., Zannettino, A. C. W., Dutta, N. K., & Choudhury, N. R. (2020). Tunable Biomimetic Hydrogels from Silk Fibroin and Nanocellulose. ACS Sustainable Chemistry & Engineering. https://doi.org/10.1021/acssuschemeng.9b05317
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.