CoChat

Dynamics of Cellulose Nanocrystal Alignment during 3D Printing

The DOI matches its Crossref record; 85 of the 85 references it cites were found in a registry or an index.

Abstract

The alignment of anisotropic particles during ink deposition directly affects the microstructure and properties of materials manufactured by extrusion-based 3D printing. Although particle alignment in diluted suspensions is well described by analytical and numerical models, the dynamics of particle orientation in the highly concentrated inks typically used for printing via direct ink writing (DIW) remains poorly understood. Using cellulose nanocrystals (CNCs) as model building blocks of increasing technological relevance, we study the dynamics of particle alignment under the shear stresses applied to concentrated inks during DIW. With the help of in situ polarization rheology, we find that the time period needed for particle alignment scales inversely with the applied shear rate and directly with the particle concentration. Such dependences can be quantitatively described by a simple scaling relation and qualitatively interpreted in terms of steric and hydrodynamic interactions between particles at high shear rates and particle concentrations. Our understanding of the alignment dynamics is then utilized to estimate the effect of shear stresses on the orientation of particles during the printing process. Finally, proof-of-concept experiments show that the combination of shear and extensional flow in 3D printing nozzles of different geometries provides an effective means to tune the orientation of CNCs from fully aligned to core-shell architectures. These findings offer powerfu…

Overview

Integrity signals

Registry

Crossref · 10.1021/acsnano.8b02366

Cites

85 of 85 references verified0 citation errors · 0 not checkable

Statistics

Recomputing p-values needs the paper’s full text.

Verification

Claims the paper makes

This paper’s full text isn’t openly available, so its claims and self-check weren’t run. The registry and citation checks still apply.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 85 references

Research works printed but not linked: 3

  1. Håkansson K., 2012, Trita-MEK
  2. Volker-Pop L. M., 2014, Chem. Listy, 108, 707
  3. 10.1002/(sici)1521-3935(19980401)199:4<471::aid-macp471>3.0.co;2-9 · doi:10.1002/(sici)1521-3935(19980401)199:4<471::aid-macp471>3.0.co;2-9

Cited by

See all 291

Metadata

Authors
Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R.
Affiliations
  • ETH Zurich (CH)
  • Anton Paar Germany GmbH, Helmuth-Hirth-Strasse 6, D-73760 Ostfildern, Germany
  • Empa (CH)
Corresponding author
  • Rühs, Patrick A.
  • Siqueira, Gilberto
  • Studart, André R.
Venue
ACS Nano
Published
2018-07-05
Volume
12
Issue
7
Pages
6926-6937
ISSN
  • 1936-0851 (ISSN-L)
  • 1936-086X
OpenAlex
W2861423554
Cited by
282
References
83
Citations by year
2026: 21 · 2025: 28 · 2024: 31 · 2023: 45 · 2022: 50 · 2021: 40 · 2020: 39 · 2019: 23 · 2018: 5
FWCI
21.41
Type
journal article
Language
en
Open access
closed
Locations
  • ACS Nano (publishedVersion)
  • PubMed (publishedVersion)
  • DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) (submittedVersion)
Funders
  • Schweizerischer Nationalfonds zur F?rderung der Wissenschaftlichen Forschung (200021_159906/1, BSCGI0_157696)
  • Innosuisse
Topics
  • Physical Sciences › Engineering › Building and Construction › Innovations in Concrete and Construction Materials
  • Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
  • Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
Keywords
cellulose nanocrystals, particle alignment, direct ink writing, concentrated suspensions, shear stress, steric interactions, hydrodynamic interactions, extensional flow, core-shell structure, anisotropic particles, material extrusion, composite materials, nozzle geometry

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Dynamics of Cellulose Nanocrystal Alignment during 3D Printing. https://app.cochat.ai/papers/10.1021/acsnano.8b02366
The paper
Hausmann, M. K., Rühs, P. A., Siqueira, G., Läuger, J., Libanori, R., Zimmermann, T., & Studart, A. R. (2018). Dynamics of Cellulose Nanocrystal Alignment during 3D Printing. ACS Nano. https://doi.org/10.1021/acsnano.8b02366

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.