The DOI matches its Crossref record.
Stress Sensing in Polycaprolactone Films via an Embedded Photochromic Compound
Open accessAbstract
A photochromic polymer exhibiting mechanochromic behavior is prepared by means of ring-opening polymerization (ROP) of epsilon-caprolactone by utilizing a difunctional indolinospiropyran as an initiator. The configuration of having the photochromic initiating species within the polymer backbone leads to a mechanochromic effect with deformation of polymer films leading to ring-opening of the spiro C-O bond to form the colored merocyanine. Active stress monitoring by dynamic mechanical analysis (DMA) in tension mode was used to probe the effects of UV irradiation on polymer films held under constant strain. Irradiation with UV light induces a negative change in the polymer stress of approximately 50 kPa. Finally, a model of the mechanochromic effect was performed using density functional theory (DFT) and time-dependent DFT (TDDFT) calculations. A sharp increase in the relative molecular energy and the absorption wavelength as well as a drastic decrease in the spiro-oxygen atom charge occurred at a molecular elongation of >39%.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Spiropyran-based dynamic materials
Klajn, R. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60181a · Cited by 2,058
Dong, K., Wu, Z., Deng, J., Wang, A. C., Zou, H., Chen, C., Hu, D., Gu, B., Sun, B., & Wang, Z. L. (2018) · Advanced Materials · doi:10.1002/adma.201804944 · Cited by 499
Dye-containing polymers: methods for preparation of mechanochromic materials
Ciardelli, F., Ruggeri, G., & Pucci, A. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35414d · Cited by 454
Parida, K., Kumar, V., Jiangxin, W., Bhavanasi, V., Bendi, R., & Lee, P. S. (2017) · Advanced Materials · doi:10.1002/adma.201702181 · Cited by 387
A Novel Design of Multi‐Mechanoresponsive and Mechanically Strong Hydrogels
Chen, H., Yang, F., Chen, Q., & Zheng, J. (2017) · Advanced Materials · doi:10.1002/adma.201606900 · Cited by 314
Abdollahi, A., Roghani-Mamaqani, H., & Razavi, B. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101149 · Cited by 300
3D-Printed Mechanochromic Materials
Peterson, G. I., Larsen, M. B., Ganter, M. A., Storti, D. W., & Boydston, A. J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am506745m · Cited by 273
Lin, L., Liu, S., Zhang, Q., Li, X., Ji, M., Deng, H., & Fu, Q. (2013) · ACS Applied Materials & Interfaces · doi:10.1021/am401402x · Cited by 270
Keyvan Rad, J., Balzade, Z., & Mahdavian, A. R. (2022) · Journal of Photochemistry and Photobiology C: Photochemistry Reviews · doi:10.1016/j.jphotochemrev.2022.100487 · Cited by 256
Wang, Q., Gossweiler, G. R., Craig, S. L., & Zhao, X. (2014) · Nature Communications · doi:10.1038/ncomms5899 · Cited by 254
Polymers and dyes: Developments and applications
Fleischmann, C., Lievenbrück, M., & Ritter, H. (2015) · Polymers · doi:10.3390/polym7040717 · Cited by 188
Metadata
- Authors
- O’Bryan, G., Wong, B. M., & McElhanon, J. R.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-05-19
- Volume
- 2
- Issue
- 6
- Pages
- 1594-1600
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W1983551924
- Cited by
- 213
- References
- 0
- FWCI
- 8.37
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.