The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Electrospun Carbon-Tin Oxide Composite Nanofibers for Use as Lithium Ion Battery Anodes
Abstract
Composite carbon-tin oxide (C-SnO(2)) nanofibers are prepared by two methods and evaluated as anodes in lithium-ion battery half cells. Such an approach complements the long cycle life of carbon with the high lithium storage capacity of tin oxide. In addition, the high surface-to-volume ratio of the nanofibers improves the accessibility for lithium intercalation as compared to graphite-based anodes, while eliminating the need for binders or conductive additives. The composite nanofibrous anodes have first discharge capacities of 788 mAh g(-1) at 50 mA g(-1) current density, which are greater than pure carbon nanofiber anodes, as well as the theoretical capacity of graphite (372 mAh g(-1)), the traditional anode material. In the first protocol to fabricate the C-SnO(2) composites, tin sulfate is directly incorporated within polyacrylonitrile (PAN) nanofibers by electrospinning. During a thermal treatment the tin salt is converted to tin oxide and the polymer is carbonized, yielding carbon-SnO(2) nanofibers. In the second approach, we soak the nanofiber mats in tin sulfate solutions prior to the final thermal treatment, thereby loading the outer surfaces with SnO(2) nanoparticles and raising the tin content from 1.9 to 8.6 wt %. Energy-dispersive spectroscopy and X-ray diffraction analyses confirm the formation of conversion of tin sulfate to tin oxide. Furthermore, analysis with Raman spectroscopy reveals that the additional salt soak treatment from the second fabrication approach increases in the disorder of the carbon structure, as compared to the first approach. We also discuss the performance of our C-SnO(2) compared with its theoretical capacity and other nanofiber electrode composites previously reported in the literature.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Capacity Fade Mechanisms and Side Reactions in Lithium‐Ion Batteries
Arora, P., White, R. E., & Doyle, M. (1998) · Journal of The Electrochemical Society · doi:10.1149/1.1838857 · Cited by 1,408
Cited by
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Functional materials by electrospinning of polymers
Agarwal, S., Greiner, A., & Wendorff, J. H. (2013) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2013.02.001 · Cited by 925
A review: carbon nanofibers from electrospun polyacrylonitrile and their applications
Zhang, L., Aboagye, A., Kelkar, A., Lai, C., & Fong, H. (2014) · Journal of Materials Science · doi:10.1007/s10853-013-7705-y · Cited by 612
Zhao, Y., Wang, L. P., Sougrati, M. T., Feng, Z., Leconte, Y., Fisher, A., Srinivasan, M., & Xu, Z. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601424 · Cited by 586
Carbon-Based Fibers for Advanced Electrochemical Energy Storage Devices
Chen, S., Qiu, L., & Cheng, H.-M. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00466 · Cited by 555
A review on fabrication of nanofibers via electrospinning and their applications
Islam, M. S., Ang, B. C., Andriyana, A., & Afifi, A. M. (2019) · SN Applied Sciences · doi:10.1007/s42452-019-1288-4 · Cited by 386
A Chronicle Review of Nonsilicon (Sn, Sb, Ge)‐Based Lithium/Sodium‐Ion Battery Alloying Anodes
Liang, S., Cheng, Y., Zhu, J., Xia, Y., & Müller‐Buschbaum, P. (2020) · Small Methods · doi:10.1002/smtd.202000218 · Cited by 383
Ultra‐Uniform SnOx/Carbon Nanohybrids toward Advanced Lithium‐Ion Battery Anodes
Zhou, X., Dai, Z., Liu, S., Bao, J., & Guo, Y. (2014) · Advanced Materials · doi:10.1002/adma.201400173 · Cited by 330
Peng, S., Li, L., Kong Yoong Lee, J., Tian, L., Srinivasan, M., Adams, S., & Ramakrishna, S. (2016) · Nano Energy · doi:10.1016/j.nanoen.2016.02.001 · Cited by 304
Electrospinning of ceramic nanofibers: Fabrication, assembly and applications
Wu, H., Pan, W., Lin, D., & Li, H. (2012) · Journal of Advanced Ceramics · doi:10.1007/s40145-012-0002-4 · Cited by 284
Metadata
- Authors
- Bonino, C. A., Ji, L., Lin, Z., Toprakci, O., Zhang, X., & Khan, S. A.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-06-10
- Volume
- 3
- Issue
- 7
- Pages
- 2534-2542
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2329724284
- Cited by
- 167
- References
- 1
- FWCI
- 11.59
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.