Formation of Shish-Kebabs in Injection-Molded Poly(l-lactic acid) by Application of an Intense Flow Field
The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Abstract
Unlike polyolefins (e.g., isotactic polypropylene), it is still a great challenge to form rich shish-kebabs in biodegradable poly(L-lactic acid) (PLLA) because of its short chain length and semirigid chain backbone. In the present work, a modified injection molding technology, named oscillation shear injection molding, was applied to provide an intense shear flow on PLLA melt in mold cavity, in order to promote shear-induced crystallization of PLLA. Additionally, a small amount of poly(ethylene glycol) (PEG) with flexible chains was introduced for improving the crystallization kinetics. Numerous shish-kebabs of PLLA were achieved in injection-molded PLLA for the first time. High-resolution scanning electronic microscopy and small-angle X-ray scattering showed a structure feature of shish-kebabs with a diameter of around 0.7 μm and a long period of ~20 nm. The wide-angle X-ray diffraction results showed that shish-kebabs had more ordered crystalline structure of α-form. A significant improvement of the mechanical properties was obtained; the tensile strength and modulus increased to 73.7 and 1888 MPa from the initial values of 64.9 and 1684 MPa, respectively, meanwhile the ductility is not deteriorated. Interestingly, when shish-kebabs form in the PLLA/PEG system, a bamboo-like bionic structure comprising a hard skin layer and a soft core develops in injection-molded specimen. This unique structure leads to a great balance of mechanical properties, including substantial increments of 26, 20, and 112% in the tensile strength, modulus, and impact toughness, compared to the control sample. Further exploration will give a rich fundamental understanding in the shear-induced crystallization and morphology manipulation of PLLA, aiming to achieve superior PLLA products.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Zhang, J., Duan, Y., Sato, H., Tsuji, H., Noda, I., Yan, S., & Ozaki, Y. (2005) · Macromolecules · doi:10.1021/ma051232r · Cited by 893
Pillin, I., Montrelay, N., & Grohens, Y. (2006) · Polymer · doi:10.1016/j.polymer.2006.04.013 · Cited by 366
Preparation and Properties of Plasticized Poly(lactic acid) Films
Ljungberg, N., & Wesslén, B. (2005) · Biomacromolecules · doi:10.1021/bm050098f · Cited by 331
Ljungberg, N., & Wesslén, B. (2003) · Polymer · doi:10.1016/j.polymer.2003.09.055 · Cited by 278
Hu, Y., Hu, Y. S., Topolkaraev, V., Hiltner, A., & Baer, E. (2003) · Polymer · doi:10.1016/s0032-3861(03)00615-3 · Cited by 258
Furuhashi, Y., Kimura, Y., Yoshie, N., & Yamane, H. (2006) · Polymer · doi:10.1016/j.polymer.2006.06.001 · Cited by 127
Cited by
Multiscale and Multistep Ordering of Flow-Induced Nucleation of Polymers
Cui, K., Ma, Z., Tian, N., Su, F., Liu, D., & Li, L. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00500 · Cited by 309
Zheng, Y., & Pan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101291 · Cited by 229
Manufacturing and compatibilization of PLA/PBAT binary blends by cottonseed oil-based derivatives
Carbonell-Verdu, A., Ferri, J. M., Dominici, F., Boronat, T., Sanchez-Nacher, L., Balart, R., & Torre, L. (2018) · Express Polymer Letters · doi:10.3144/expresspolymlett.2018.69 · Cited by 91
Shahnooshi, M., Schneider, K., Javadi, A., & Altstädt, V. (2023) · Polymer · doi:10.1016/j.polymer.2023.126254 · Cited by 6
Metadata
- Authors
- Xu, H., Zhong, G.-J., Fu, Q., Lei, J., Jiang, W., Hsiao, B. S., & Li, Z.-M.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-12-04
- Volume
- 4
- Issue
- 12
- Pages
- 6774-6784
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W1967128322
- Cited by
- 143
- References
- 8
- FWCI
- 7.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Formation of Shish-Kebabs in Injection-Molded Poly(l-lactic acid) by Application of an Intense Flow Field. https://app.cochat.ai/papers/10.1021/am3019756
- The paper
- Xu, H., Zhong, G.-J., Fu, Q., Lei, J., Jiang, W., Hsiao, B. S., & Li, Z.-M. (2012). Formation of Shish-Kebabs in Injection-Molded Poly(l-lactic acid) by Application of an Intense Flow Field. ACS Applied Materials & Interfaces. https://doi.org/10.1021/am3019756
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.