The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Interfacial Stress Transfer in Graphene Oxide Nanocomposites
Abstract
Raman spectroscopy has been used for the first time to monitor interfacial stress transfer in poly(vinyl alcohol) nanocomposites reinforced with graphene oxide (GO). The graphene oxide nanocomposites were prepared by a simple mixing method and casting from aqueous solution. They were characterized using scanning electron microscopy, X-ray diffraction, and polarized Raman spectroscopy and their mechanical properties determined by tensile testing and dynamic mechanical thermal analysis. It was found that GO was fully exfoliated during the nanocomposite preparation process and that the GO nanoplatelets tended align in the plane of the films. The stiffness and yield stress of the nanocomposites were found to increase with GO loading but the extension to failure decreased. It was shown that the Raman D band at ~1335 cm(-1) downshifted as the nanocomposites were strained as a result of the interfacial stress transfer between the polymer matrix and GO reinforcement. From knowledge of the Grüneisen parameter for graphene, it was possible to estimate the effective Young's modulus of the GO from the Raman D band shift rate per unit strain to be of the order of 120 GPa. A similar value of effective modulus was found from the tensile mechanical data using the "rule of mixtures" that decreased with GO loading. The accepted value of Young's modulus for GO is in excess of 200 GPa and it is suggested that the lower effective Young's modulus values determined may be due to a combination of finite flake dimensions, waviness and wrinkles, aggregation, and misalignment of the GO flakes.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Self-Assembled Graphene Hydrogel via a One-Step Hydrothermal Process
Xu, Y., Sheng, K., Li, C., & Shi, G. (2010) · ACS Nano · doi:10.1021/nn101187z · Cited by 3,251
Mechanical Properties of Monolayer Graphene Oxide
Suk, J. W., Piner, R. D., An, J., & Ruoff, R. S. (2010) · ACS Nano · doi:10.1021/nn101781v · Cited by 1,194
Cited by
Mechanical properties of graphene and graphene-based nanocomposites
Papageorgiou, D. G., Kinloch, I. A., & Young, R. J. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.07.004 · Cited by 2,579
Self-citationRaman spectroscopy of carbon materials and their composites: Graphene, nanotubes and fibres
Li, Z., Deng, L., Kinloch, I. A., & Young, R. J. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101089 · Cited by 1,117
Self-citationGraphene-polymer nanocomposites for structural and functional applications
Hu, K., Kulkarni, D. D., Choi, I., & Tsukruk, V. V. (2014) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.03.001 · Cited by 1,085
Graphene Nanomaterials: Synthesis, Biocompatibility, and Cytotoxicity
Liao, C., Li, Y., & Tjong, S. C. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19113564 · Cited by 540
Graphene/elastomer nanocomposites
Papageorgiou, D. G., Kinloch, I. A., & Young, R. J. (2015) · Carbon · doi:10.1016/j.carbon.2015.08.055 · Cited by 397
Self-citation
Metadata
- Authors
- Li, Z., Young, R. J., & Kinloch, I. A.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-01-03
- Volume
- 5
- Issue
- 2
- Pages
- 456-463
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W1966672874
- Cited by
- 166
- References
- 2
- FWCI
- 4.78
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.