The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Zeolitic Imidazolate Framework-8 for Fast Adsorption and Removal of Benzotriazoles from Aqueous Solution
Abstract
1H-benzotriazole (BTri) and 5-tolyltriazole (5-TTri) are emerging pollutants; the development of novel materials for their efficient adsorption and removal is thus of great significance in environmental sciences. Here, we report the application of zeolitic imidazolate framework-8 (ZIF-8) as a novel adsorbent for fast removal of BTri and 5-TTri in aqueous solution in view of adsorption isotherms, kinetics and thermodynamics, desorption, and adsorbent regeneration. The adsorption of BTri and 5-TTri on ZIF-8 was very fast, and most of BTri and 5-TTri were adsorbed in the first 2 min. The adsorption for BTri and 5-TTri follows a pseudo-second-order kinetics and fits the Langmuir adsorption model with the adsorption capacity of 298.5 and 396.8 mg g(-1) for BTri and 5-TTri at 30 °C, respectively. The adsorption was a spontaneous and endothermic process controlled by positive entropy change. No remarkable effects of pH, ionic strength, and dissolved organic matter on the adsorption of BTri and 5-TTri on ZIF-8 were observed. The used ZIF-8 could be regenerated effectively and recycled at least three times without significant loss of adsorption capacity. In addition, ZIF-8 provided much larger adsorption capacity and faster adsorption kinetics than activated carbon and ZIF-7. The hydrophobic and π-π interaction between the aromatic rings of the BTri and 5-TTri and the aromatic imizole rings of the ZIF-8, and the coordination of the nitrogen atoms in BTri and 5-TTri molecules to the Zn(2+) ions in the ZIF-8 framework was responsible for the efficient adsorption. The fast adsorption kinetics, large adsorption capacity, excellent reusability as well as the pH, ionic strength, and dissolved organic matter insensitive adsorption create potential for ZIF-8 to be effective at removing benzotriazoles from aqueous solution.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Pseudo-second order model for sorption processes
Ho, Y. S., & McKay, G. (1999) · Process Biochemistry · doi:10.1016/s0032-9592(98)00112-5 · Cited by 17,497
Design and synthesis of an exceptionally stable and highly porous metal-organic framework
Li, H., Eddaoudi, M., O'Keeffe, M., & Yaghi, O. M. (1999) · Nature · doi:10.1038/46248 · Cited by 8,554
Exceptional chemical and thermal stability of zeolitic imidazolate frameworks
Park, K. S., Ni, Z., Côté, A. P., Choi, J. Y., Huang, R., Uribe-Romo, F. J., Chae, H. K., O’Keeffe, M., & Yaghi, O. M. (2006) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0602439103 · Cited by 7,563
Metal–Organic Framework Materials as Chemical Sensors
Kreno, L. E., Leong, K., Farha, O. K., Allendorf, M., Van Duyne, R. P., & Hupp, J. T. (2012) · Chemical Reviews · doi:10.1021/cr200324t · Cited by 7,136
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Metal–Organic Frameworks for Separations
Li, J.-R., Sculley, J., & Zhou, H.-C. (2012) · Chemical Reviews · doi:10.1021/cr200190s · Cited by 6,323
Hybrid porous solids: past, present, future
Férey, G. (2008) · Chem. Soc. Rev. · doi:10.1039/b618320b · Cited by 5,822
Homochiral Metal–Organic Frameworks for Asymmetric Heterogeneous Catalysis
Yoon, M., Srirambalaji, R., & Kim, K. (2012) · Chemical Reviews · doi:10.1021/cr2003147 · Cited by 2,856
O’Keeffe, M., & Yaghi, O. M. (2012) · Chemical Reviews · doi:10.1021/cr200205j · Cited by 2,143
Multiple Functional Groups of Varying Ratios in Metal-Organic Frameworks
Deng, H., Doonan, C. J., Furukawa, H., Ferreira, R. B., Towne, J., Knobler, C. B., Wang, B., & Yaghi, O. M. (2010) · Science · doi:10.1126/science.1181761 · Cited by 1,917
Cited by
Water Stability and Adsorption in Metal–Organic Frameworks
Burtch, N. C., Jasuja, H., & Walton, K. S. (2014) · Chemical Reviews · doi:10.1021/cr5002589 · Cited by 2,730
Metal–Organic Frameworks for the Removal of Emerging Organic Contaminants in Water
Rojas, S., & Horcajada, P. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00797 · Cited by 1,101
Metal–organic frameworks (MOFs) for the removal of emerging contaminants from aquatic environments
Dhaka, S., Kumar, R., Deep, A., Kurade, M. B., Ji, S.-W., & Jeon, B.-H. (2019) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2018.10.003 · Cited by 615
Lin, K.-Y. A., & Chang, H.-A. (2015) · Chemosphere · doi:10.1016/j.chemosphere.2015.01.041 · Cited by 501
Zhu, X., Li, B., Yang, J., Li, Y., Zhao, W., Shi, J., & Gu, J. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/am5059074 · Cited by 486
Rapid Construction of ZnO@ZIF-8 Heterostructures with Size-Selective Photocatalysis Properties
Wang, X., Liu, J., Leong, S., Lin, X., Wei, J., Kong, B., Xu, Y., Low, Z.-X., Yao, J., & Wang, H. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00028 · Cited by 393
Li, X., Gao, X., Ai, L., & Jiang, J. (2015) · Chemical Engineering Journal · doi:10.1016/j.cej.2015.03.127 · Cited by 382
Self-citationZhang, Y., Zhu, C., Liu, F., Yuan, Y., Wu, H., & Li, A. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.07.279 · Cited by 353
Zhao, L., Deng, J., Sun, P., Liu, J., Ji, Y., Nakada, N., Qiao, Z., Tanaka, H., & Yang, Y. (2018) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.02.006 · Cited by 339
Khan, N. A., Jung, B. K., Hasan, Z., & Jhung, S. H. (2015) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2014.03.047 · Cited by 333
Extensive and selective adsorption of ZIF-67 towards organic dyes: Performance and mechanism
Du, X.-D., Wang, C.-C., Liu, J.-G., Zhao, X.-D., Zhong, J., Li, Y.-X., Li, J., & Wang, P. (2017) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2017.07.073 · Cited by 313
Andrew Lin, K.-Y., Hsu, F.-K., & Lee, W.-D. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta06516f · Cited by 288
Wu, C.-S., Xiong, Z.-H., Li, C., & Zhang, J.-M. (2015) · RSC Advances · doi:10.1039/c5ra15497a · Cited by 272
Jin, J., Yang, Z., Xiong, W., Zhou, Y., Xu, R., Zhang, Y., Cao, J., Li, X., & Zhou, C. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.08.434 · Cited by 266
Metadata
- Authors
- Jiang, J.-Q., Yang, C.-X., & Yan, X.-P.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-09-30
- Volume
- 5
- Issue
- 19
- Pages
- 9837-9842
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2322543234
- Cited by
- 278
- References
- 39
- FWCI
- 17.26
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.