The DOI matches its Crossref record.
Comparison of the Electrochemical Performance of NiMoO4Nanorods and Hierarchical Nanospheres for Supercapacitor Applications
Abstract
Much attention has been paid to exploring electrode materials with enhanced supercapacitor performance as well as relatively low cost and environmental friendliness. In this work, NiMoO4 nanospheres and nanorods were synthesized by facile hydrothermal methods. The hierarchical NiMoO4 nanospheres were about 2.5 μm in diameter and assembled from thin mesoporous nanosheets with a thickness of about 10-20 nm. The NiMoO4 nanorods were about 80 nm in diameter and about 300 nm to 1 μm in length. Their electrochemical properties were investigated for use as electrode materials for supercapacitors (SCs). The NiMoO4 nanospheres exhibited a higher specific capacitance and better cycling stability and rate capability, which were attributed to their large surface area and high electrical conductivity. The specific capacitances were 974.4, 920.8, 875.5, 859.1, and 821.4 F/g at current densities of 1, 2, 4, 6, and 10 A/g, respectively. Remarkably, the energy density was able to reach 20.1 Wh/kg at a power density of 2100 W/kg. After 2000 cycles, the NiMoO4 nanospheres still displayed a high specific capacitance of about 631.8 F/g at a current density of 5 A/g. These results implied that the hierarchical NiMoO4 nanospheres could be a promising candidate for use as high-performance SCs.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Low-crystalline iron oxide hydroxide nanoparticle anode for high-performance supercapacitors
Owusu, K. A., Qu, L., Li, J., Wang, Z., Zhao, K., Yang, C., Hercule, K. M., Lin, C., Shi, C., Wei, Q., et al. (2017) · Nature Communications · doi:10.1038/ncomms14264 · Cited by 720
Nanostructured Mo-based electrode materials for electrochemical energy storage
Hu, X., Zhang, W., Liu, X., Mei, Y., & Huang, Y. (2015) · Chemical Society Reviews · doi:10.1039/c4cs00350k · Cited by 711
Binary metal oxide: advanced energy storage materials in supercapacitors
Zhang, Y., Li, L., Su, H., Huang, W., & Dong, X. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta04996a · Cited by 666
Peng, S., Li, L., Wu, H. B., Madhavi, S., & Lou, X. W. (. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401172 · Cited by 638
Abdel Maksoud, M. I. A., Fahim, R. A., Shalan, A. E., Abd Elkodous, M., Olojede, S. O., Osman, A. I., Farrell, C., Al-Muhtaseb, A. H., Awed, A. S., Ashour, A. H., et al. (2021) · Environmental Chemistry Letters · doi:10.1007/s10311-020-01075-w · Cited by 567
Solution combustion synthesis of metal oxide nanomaterials for energy storage and conversion
Li, F.-T., Ran, J., Jaroniec, M., & Qiao, S. Z. (2015) · Nanoscale · doi:10.1039/c5nr05299h · Cited by 400
Muralee Gopi, C. V. V., Vinodh, R., Sambasivam, S., Obaidat, I. M., & Kim, H.-J. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2019.101035 · Cited by 332
Chen, H., Zhou, S., & Wu, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am5014375 · Cited by 269
Metadata
- Authors
- Cai, D., Wang, D., Liu, B., Wang, Y., Liu, Y., Wang, L., Li, H., Huang, H., Li, Q., & Wang, T.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-12-09
- Volume
- 5
- Issue
- 24
- Pages
- 12905-12910
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2321403556
- Cited by
- 322
- References
- 0
- FWCI
- 7.30
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.