The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Superhydrophobic and Oleophilic Open-Cell Foams from Fibrillar Blends of Polypropylene and Polytetrafluoroethylene
Abstract
Effective removal of oils from water is of global significance for environmental protection. In this study, we investigate the hydrophobicity and oleophilicity of open-cell polymer foams prepared in a continuous and scalable extrusion process. The material used to prepare the open-cell foams is a fibrillar blend of polypropylene (PP) and polytetrafluoroethylene (PTFE). Scanning electron microscopy (SEM) images of the morphology of the PP/PTFE fibrillar blend reveal that the PTFE has a fibrillar morphology in the PP matrix. SEM micrograph of the extruded foam shows the formation of an interconnected open-cell structure. Using nitrogen pycnometry, the open-cell content is estimated to be 97.7%. A typical bulk density of the open-cell foam is measured to be about 0.07 g cm(-3) corresponding to a void fraction of 92%. Thus, a large three-dimensional space is made available for oil storage. A drop of water on the cross-section of the extruded open-cell foam forms a contact angle of 160° suggesting that the open-cell foam exhibits superhydrophobicity. The open-cell foam can selectively absorb various petroleum products, such as octane, gasoline, diesel, kerosene, light crude oil, and heavy crude oil from water and the uptake capacities range from about 5 to 24 g g(-1). The uptake kinetics can be enhanced by exposing the open-cell foam to high intensity ultrasound which increases the surface porosity of the thin, impervious, foam "skin" layer. The reusability of the foam can be improved by using a matrix polymer which demonstrates superior elastic properties and prevents the foams from undergoing a large permanent deformation upon compression to "squeeze out" the oil. For example, when the PP homopolymer matrix is replaced with a PP random copolymer, the permanent deformation for 10 compressive cycles is reduced from about 30% to 10%. To the best of our knowledge, these PP-based open-cell foams outperform PP-based absorbents conventionally used for oil-spill cleanup applications such as nonwoven PP fibers or melt-blown PP pads.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
Cited by
A Review on Superhydrophobic Polymer Nanocoatings: Recent Development and Applications
Das, S., Kumar, S., Samal, S. K., Mohanty, S., & Nayak, S. K. (2018) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.7b04887 · Cited by 357
Manufacturing, characteristics and applications of auxetic foams: A state-of-the-art review
Jiang, W., Ren, X., Wang, S. L., Zhang, X. G., Zhang, X. Y., Luo, C., Xie, Y. M., Scarpa, F., Alderson, A., & Evans, K. E. (2022) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2022.109733 · Cited by 284
Low‐Density Open Cellular Sponges as Functional Materials
Jiang, S., Agarwal, S., & Greiner, A. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201700684 · Cited by 217
Heat transfer in microcellular polystyrene/multi-walled carbon nanotube nanocomposite foams
Gong, P., Buahom, P., Tran, M.-P., Saniei, M., Park, C. B., & Pötschke, P. (2015) · Carbon · doi:10.1016/j.carbon.2015.06.003 · Cited by 200
Self-citationLi, X., Wang, J., Yi, G., Teong, S. P., Chan, S. P., & Zhang, Y. (2024) · Applied Catalysis B: Environmental · doi:10.1016/j.apcatb.2023.123378 · Cited by 57
Metadata
- Authors
- Rizvi, A., Chu, R. K. M., Lee, J. H., & Park, C. B.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2014-12-01
- Volume
- 6
- Issue
- 23
- Pages
- 21131-21140
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2335510259
- Cited by
- 172
- References
- 1
- FWCI
- 3.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.