Layered Metal Phosphonate Reinforced Poly(l-lactide) Composites with a Highly Enhanced Crystallization Rate
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Layered metal phosphonate, zinc phenylphosphonate (PPZn), reinforced poly(L-lactide) (PLLA) composites were fabricated by a melt-mixing technique. The nonisothermal and isothermal crystallization, melting behavior, spherulite morphology, crystalline structure, and static and dynamic mechanical properties of the PLLA/PPZn composites were investigated. PPZn shows excellent nucleating effects on PLLA crystallization. With incorporation of 0.02% PPZn, PLLA can finish crystallization under cooling at 10 degrees C/min. The crystallization rate of PLLA further increases with increasing PPZn concentration. Upon the addition of 15% PPZn, the crystallization half-times of a PLLA/PPZn composite decrease from 28.0 to 0.33 min at 130 degrees C, and from 60.2 to 1.4 min at 140 degrees C, compared to the neat PLLA. With the presence of PPZn, the nuclei number of PLLA increases and the spherulite size reduces significantly. Through analysis of the crystal structures of PLLA and PPZn, it was proposed that the nucleation mechanism of the PLLA/PPZn system is epitaxial nucleation. The incorporation of PPZn has no discernible effect on the crystalline structure of PLLA. Moreover, PPZn has good reinforcement effects on the PLLA matrix. The tensile strength of the composite is enhanced with the addition of a relatively small amount of PPZn (<5%). The tensile and storage moduli of composites increase with increasing PPZn loadings, and they respectively improve by 28% and 34% with the incorporation of a 15% PPZn filler, as compared to the neat PLLA.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactic acid) fiber: An overview
Gupta, B., Revagade, N., & Hilborn, J. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.01.005 · Cited by 1,360
Zhang, J., Tashiro, K., Tsuji, H., & Domb, A. J. (2008) · Macromolecules · doi:10.1021/ma0706071 · Cited by 913
Effect of nucleation and plasticization on the crystallization of poly (lactic acid)
Li, H., & Huneault, M. A. (2007) · Polymer · doi:10.1016/j.polymer.2007.09.020 · Cited by 810
Pan, P., Kai, W., Zhu, B., Dong, T., & Inoue, Y. (2007) · Macromolecules · doi:10.1021/ma071258d · Cited by 679
Self-citationRay, S. S., & Okamoto, M. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200300008 · Cited by 454
Melting behavior of poly(l-lactic acid): X-ray and DSC analyses of the melting process
Yasuniwa, M., Sakamo, K., Ono, Y., & Kawahara, W. (2008) · Polymer · doi:10.1016/j.polymer.2008.02.034 · Cited by 213
Cited by
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
Zheng, Y., & Pan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101291 · Cited by 229
Self-citationYang, J., Pan, P., Hua, L., Zhu, B., Dong, T., & Inoue, Y. (2010) · Macromolecules · doi:10.1021/ma1015566 · Cited by 102
Self-citationImproved mechanical and thermal properties of PLLA by solvent blending with PDLA-b-PEG-b-PDLA
Liu, Y., Shao, J., Sun, J., Bian, X., Feng, L., Xiang, S., Sun, B., Chen, Z., Li, G., & Chen, X. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.01.023 · Cited by 69
Jing, Z., Huang, X., Liu, X., Liao, M., & Li, Y. (2023) · Polymer International · doi:10.1002/pi.6445 · Cited by 11
Metadata
- Authors
- Pan, P., Liang, Z., Cao, A., & Inoue, Y.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-01-07
- Volume
- 1
- Issue
- 2
- Pages
- 402-411
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W1996963438
- Cited by
- 201
- References
- 7
- FWCI
- 8.36
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Layered Metal Phosphonate Reinforced Poly(l-lactide) Composites with a Highly Enhanced Crystallization Rate. https://app.cochat.ai/papers/10.1021/am800106f
- The paper
- Pan, P., Liang, Z., Cao, A., & Inoue, Y. (2009). Layered Metal Phosphonate Reinforced Poly(l-lactide) Composites with a Highly Enhanced Crystallization Rate. ACS Applied Materials & Interfaces. https://doi.org/10.1021/am800106f
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.