Compatibilization by Homopolymer: Significant Improvements in the Modulus and Tensile Strength of PPC/PMMA Blends by the Addition of a Small Amount of PVAc
The DOI matches its Crossref record.
Abstract
Poly(propylene carbonate) (PPC), a polymer produced from CO2, has been melt-mixed with 30 wt % poly(methyl methacrylate) (PMMA) with the aim of enhancing the physical properties of PPC for practical use but keeping a relatively high CO2 fixing rate in the compound. The observation of a coarse phase structure with a large PMMA domain size and a large size distribution in the blend indicates the immiscibility between PPC and PMMA. The addition of a small amount of poly(vinyl acetate) (PVAc) not only shifts the glass transition temperatures (T(g)'s) of both PPC and PMMA markedly but also significantly increases the modulus and tensile strength of the blend. The prepared compound with 5 per hundred parts of resin PVAc shows a 26 times higher elastic modulus and an approximately 3.8 times higher tensile strength than pure PPC at room temperature. The morphological investigation indicates that the incorporation to PVAC not only induces the finer dispersion of PMMA in the PPC matrix but also results in the phase transformation from a sea-island to a co-continuous structure.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Zhang, K., Mohanty, A. K., & Misra, M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3004522 · Cited by 335
Supertoughened Renewable PLA Reactive Multiphase Blends System: Phase Morphology and Performance
Zhang, K., Nagarajan, V., Misra, M., & Mohanty, A. K. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am502337u · Cited by 267
Muthuraj, R., & Mekonnen, T. (2018) · Polymer · doi:10.1016/j.polymer.2018.04.078 · Cited by 256
Wang, H., Dong, W., & Li, Y. (2015) · ACS Macro Letters · doi:10.1021/acsmacrolett.5b00763 · Cited by 107
Self-citationChuakhao, S., Rodríguez, J. T., Lapnonkawow, S., Kannan, G., Müller, A. J., & Suttiruengwong, S. (2024) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108383 · Cited by 73
Metadata
- Authors
- Li, Y., & Shimizu, H.
- Venue
- ACS Applied Materials & Interfaces
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-08-05
- Volume
- 1
- Issue
- 8
- Pages
- 1650-1655
- ISSN
- 1944-8244 (ISSN-L)
- 1944-8252
- OpenAlex
- W2002617078
- Cited by
- 86
- References
- 0
- FWCI
- 2.79
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Compatibilization by Homopolymer: Significant Improvements in the Modulus and Tensile Strength of PPC/PMMA Blends by the Addition of a Small Amount of PVAc. https://app.cochat.ai/papers/10.1021/am900314k
- The paper
- Li, Y., & Shimizu, H. (2009). Compatibilization by Homopolymer: Significant Improvements in the Modulus and Tensile Strength of PPC/PMMA Blends by the Addition of a Small Amount of PVAc. ACS Applied Materials & Interfaces. https://doi.org/10.1021/am900314k
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.