The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Noble Metal Ionic Catalysts
Abstract
Because of growing environmental concerns and increasingly stringent regulations governing auto emissions, new more efficient exhaust catalysts are needed to reduce the amount of pollutants released from internal combustion engines. To accomplish this goal, the major pollutants in exhaust-CO, NO(x), and unburned hydrocarbons-need to be fully converted to CO(2), N(2), and H(2)O. Most exhaust catalysts contain nanocrystalline noble metals (Pt, Pd, Rh) dispersed on oxide supports such as Al(2)O(3) or SiO(2) promoted by CeO(2). However, in conventional catalysts, only the surface atoms of the noble metal particles serve as adsorption sites, and even in 4-6 nm metal particles, only 1/4 to 1/5 of the total noble metal atoms are utilized for catalytic conversion. The complete dispersion of noble metals can be achieved only as ions within an oxide support. In this Account, we describe a novel solution to this dispersion problem: a new solution combustion method for synthesizing dispersed noble metal ionic catalysts. We have synthesized nanocrystalline, single-phase Ce(1-x)M(x)O(2-delta) and Ce(1-x-y)Ti(y)M(x)O(2-delta) (M = Pt, Pd, Rh; x = 0.01-0.02, delta approximately x, y = 0.15-0.25) oxides in fluorite structure. In these oxide catalysts, Pt(2+), Pd(2+), or Rh(3+) ions are substituted only to the extent of 1-2% of Ce(4+) ion. Lower-valent noble metal ion substitution in CeO(2) creates oxygen vacancies. Reducing molecules (CO, H(2), NH(3)) are adsorbed onto electron-deficient noble metal ions, while oxidizing (O(2), NO) molecules are absorbed onto electron-rich oxide ion vacancy sites. The rates of CO and hydrocarbon oxidation and NO(x) reduction (with >80% N(2) selectivity) are 15-30 times higher in the presence of these ionic catalysts than when the same amount of noble metal loaded on an oxide support is used. Catalysts with palladium ion dispersed in CeO(2) or Ce(1-x)Ti(x)O(2) were far superior to Pt or Rh ionic catalysts. Therefore, we have demonstrated that the more expensive Pt and Rh metals are not necessary in exhaust catalysts. We have also grown these nanocrystalline ionic catalysts on ceramic cordierite and have reproduced the results we observed in powder material on the honeycomb catalytic converter. Oxygen in a CeO(2) lattice is activated by the substitution of Ti ion, as well as noble metal ions. Because this substitution creates longer Ti-O and M-O bonds relative to the average Ce-O bond within the lattice, the materials facilitate high oxygen storage and release. The interaction among M(0)/M(n+), Ce(4+)/Ce(3+), and Ti(4+)/Ti(3+) redox couples leads to the promoting action of CeO(2), activation of lattice oxygen and high oxygen storage capacity, metal support interaction, and high rates of catalytic activity in exhaust catalysis.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Catalytic Properties of Ceria and CeO2-Containing Materials
TROVARELLI, A. (1996) · Catalysis Reviews · doi:10.1080/01614949608006464 · Cited by 3,495
HARUTA, M. (1989) · Journal of Catalysis · doi:10.1016/0021-9517(89)90034-1 · Cited by 3,185
Active Nonmetallic Au and Pt Species on Ceria-Based Water-Gas Shift Catalysts
Fu, Q., Saltsburg, H., & Flytzani-Stephanopoulos, M. (2003) · Science · doi:10.1126/science.1085721 · Cited by 2,954
Ceria in automotive exhaust catalysts I. Oxygen storage
YAO, H. (1984) · Journal of Catalysis · doi:10.1016/0021-9517(84)90371-3 · Cited by 1,856
Use of CeO2-based oxides in the three-way catalysis
Kašpar, J., Fornasiero, P., & Graziani, M. (1999) · Catalysis Today · doi:10.1016/s0920-5861(98)00510-0 · Cited by 1,765
Strong metal-support interactions
Tauster, S. J. (1987) · Accounts of Chemical Research · doi:10.1021/ar00143a001 · Cited by 1,473
Spillover in Heterogeneous Catalysis
Conner, W. C., & Falconer, J. L. (1995) · Chemical Reviews · doi:10.1021/cr00035a014 · Cited by 1,330
Gandhi, H. S., Graham, G. W., & McCabe, R. W. (2003) · Journal of Catalysis · doi:10.1016/s0021-9517(02)00067-2 · Cited by 750
Nagaveni, K., Hegde, M. S., & Madras, G. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp047917v · Cited by 567
Self-citationNagaveni, K., Hegde, M. S., Ravishankar, N., Subbanna, G. N., & Madras, G. (2004) · Langmuir · doi:10.1021/la035777v · Cited by 562
Self-citationCatalytically Active Gold: From Nanoparticles to Ultrathin Films
Chen, M., & Goodman, D. W. (2006) · Accounts of Chemical Research · doi:10.1021/ar040309d · Cited by 492
Patil, K. (1997) · Current Opinion in Solid State and Materials Science · doi:10.1016/s1359-0286(97)80060-5 · Cited by 480
Self-citationBera, P., Patil, K. C., Jayaram, V., Subbanna, G. N., & Hegde, M. S. (2000) · Journal of Catalysis · doi:10.1006/jcat.2000.3048 · Cited by 376
Self-citationCatalysis by doped oxides: CO oxidation by AuxCe1−xO2
SHAPOVALOV, V, & METIU, H. (2007) · Journal of Catalysis · doi:10.1016/j.jcat.2006.10.009 · Cited by 343
Promoting Effect of CeO2 in Combustion Synthesized Pt/CeO2 Catalyst for CO Oxidation
Bera, P., Gayen, A., Hegde, M. S., Lalla, N. P., Spadaro, L., Frusteri, F., & Arena, F. (2003) · The Journal of Physical Chemistry B · doi:10.1021/jp022132f · Cited by 295
Self-citationSmith, N. V., Wertheim, G. K., Hüfner, S., & Traum, M. M. (1974) · Physical Review B · doi:10.1103/physrevb.10.3197 · Cited by 199
Murugan, B., & Ramaswamy, A. V. (2007) · Journal of the American Chemical Society · doi:10.1021/ja066834k · Cited by 172
Pino, L., Recupero, V., Beninati, S., Shukla, A. K., Hegde, M. S., & Bera, P. (2002) · Applied Catalysis A General · doi:10.1016/s0926-860x(01)00734-7 · Cited by 116
Self-citationReducibility of Ce 1-x Zr x O 2: Origin of Enhanced Oxygen Storage Capacity
Dutta, G., Waghmare, U. V., Baidya, T., Hegde, M. S., Priolkar, K. R., & Sarode, P. R. (2006) · Catalysis Letters · doi:10.1007/s10562-006-0040-z · Cited by 113
Self-citationBaidya, T., Gayen, A., Hegde, M. S., Ravishankar, N., & Dupont, L. (2006) · The Journal of Physical Chemistry B · doi:10.1021/jp0565103 · Cited by 84
Self-citationBaidya, T., Hegde, M. S., & Gopalakrishnan, J. (2007) · The Journal of Physical Chemistry B · doi:10.1021/jp070525e · Cited by 72
Self-citationStudy of surface oxidation of rare-earth metals by photoelectron spectroscopy
Sarma, D. D., Hegde, M. S., & Rao, C. N. R. (1981) · Journal of the Chemical Society Faraday Transactions 2 Molecular and Chemical Physics · doi:10.1039/f29817701509 · Cited by 60
Self-citationPala, R. G. S., & Metiu, H. I. (2008) · Journal of Catalysis · doi:10.1016/j.jcat.2008.01.014 · Cited by 44
Choudhary, V. R., Jana, P., & Bhargava, S. K. (2006) · Catalysis Communications · doi:10.1016/j.catcom.2006.08.041 · Cited by 22
Ultrafast kinetics of 9-decylanthracene photodimers and their application to 3D optical storage
Dvornikov, A. S., Bouas‐Laurent, H., Desvergne, J., & Rentzepis, P. M. (1999) · Journal of Materials Chemistry · doi:10.1039/a808272c · Cited by 17
Cited by
Solution Combustion Synthesis of Nanoscale Materials
Varma, A., Mukasyan, A. S., Rogachev, A. S., & Manukyan, K. V. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00279 · Cited by 1,453
Catalysis by Supported Single Metal Atoms
Liu, J. (2017) · ACS Catalysis · doi:10.1021/acscatal.6b01534 · Cited by 1,331
Shape-Dependent Catalytic Properties of Pt Nanoparticles
Mostafa, S., Behafarid, F., Croy, J. R., Ono, L. K., Li, L., Yang, J. C., Frenkel, A. I., & Cuenya, B. R. (2010) · Journal of the American Chemical Society · doi:10.1021/ja106679z · Cited by 428
Nanomaterials via solution combustion synthesis: a step nearer to controllability
Wen, W., & Wu, J.-M. (2014) · RSC Adv. · doi:10.1039/c4ra10145f · Cited by 262
Metadata
- Authors
- Hegde, M. S., Madras, G., & Patil, K. C.
- Venue
- Accounts of Chemical Research
- Publisher
- American Chemical Society (ACS)
- Published
- 2009-05-08
- Volume
- 42
- Issue
- 6
- Pages
- 704-712
- ISSN
- 0001-4842 (ISSN-L)
- 1520-4898
- OpenAlex
- W2058067785
- Cited by
- 337
- References
- 25
- FWCI
- 12.12
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.