The DOI matches its Crossref record.
Material Properties of Plasticized Hardwood Xylans for Potential Application as Oxygen Barrier Films
Abstract
Free films based on glucuronoxylan isolated from aspen wood were prepared by casting from aqueous solutions and drying in a controlled environment. Addition of xylitol or sorbitol facilitated film formation and thus examination of the material properties of these films. The mechanical properties of the films were evaluated using tensile testing and dynamic mechanical analysis in a controlled ambient relative humidity. The strain at break increased, and the stress at break and Young's modulus of the films decreased with increasing amounts of xylitol and sorbitol due to plasticization. At high amount of plasticizer, it was found that films with xylitol gave lower extensibility. Wide-angle X-ray scattering analysis showed that xylitol crystallized in a distinct phase, which we believe contributes to the more brittle behavior of these films. The effect of the plasticizers on the glass transition temperature was determined using dynamic mechanical analysis and differential scanning calorimetry. An increased amount of plasticizer shifted the glass transition to lower temperatures. The effect of moisture on the properties of plasticized films was investigated using water vapor sorption isotherms and by humidity scans in dynamic mechanical analysis. Sorption isotherms showed a transition from type II to type III when adding plasticizer. The films showed low oxygen permeability and thus have a potential application in food packaging.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Reviving the carbohydrate economy via multi-product lignocellulose biorefineries
Zhang, Y.-H. P. (2008) · Journal of Industrial Microbiology & Biotechnology · doi:10.1007/s10295-007-0293-6 · Cited by 622
Fractionating recalcitrant lignocellulose at modest reaction conditions
Zhang, Y. P., Ding, S., Mielenz, J. R., Cui, J., Elander, R. T., Laser, M., Himmel, M. E., McMillan, J. R., & Lynd, L. R. (2007) · Biotechnology and Bioengineering · doi:10.1002/bit.21386 · Cited by 589
Lignocellulosics as sustainable resources for production of bioplastics – A review
Brodin, M., Vallejos, M., Opedal, M. T., Area, M. C., & Chinga-Carrasco, G. (2017) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2017.05.209 · Cited by 466
Advantages and Disadvantages of Bioplastics Production from Starch and Lignocellulosic Components
Abe, M. M., Martins, J. R., Sanvezzo, P. B., Macedo, J. V., Branciforti, M. C., Halley, P., Botaro, V. R., & Brienzo, M. (2021) · Polymers · doi:10.3390/polym13152484 · Cited by 269
Water transmission barrier properties of biodegradable films based on cellulosic whiskers and xylan
Saxena, A., & Ragauskas, A. J. (2009) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2009.03.039 · Cited by 91
Metadata
- Authors
- Gröndahl, M., Eriksson, L., & Gatenholm, P.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2004-05-11
- Volume
- 5
- Issue
- 4
- Pages
- 1528-1535
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2039584946
- Cited by
- 249
- References
- 0
- FWCI
- 2.17
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Material Properties of Plasticized Hardwood Xylans for Potential Application as Oxygen Barrier Films. https://app.cochat.ai/papers/10.1021/bm049925n
- The paper
- Gröndahl, M., Eriksson, L., & Gatenholm, P. (2004). Material Properties of Plasticized Hardwood Xylans for Potential Application as Oxygen Barrier Films. Biomacromolecules. https://doi.org/10.1021/bm049925n
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.