Preparation and Properties of Plasticized Poly(lactic acid) Films
The DOI matches its Crossref record; 42 of the 42 references it cites were found in a registry or an index.
Abstract
Poly(lactic acid), PLA, was blended with monomeric and oligomeric plasticizers in order to enhance its flexibility and thereby overcome its inherent problem of brittleness. Differential scanning calorimetry, dynamic mechanical analysis, transmission electron microscopy, and tensile testing were used to investigate the properties of the blends. Monomeric plasticizers, such as tributyl citrate, TbC, and diethyl bishydroxymethyl malonate, DBM, drastically decreased the T(g) of PLA, but the blends showed no morphological stability over time since rapid cold crystallization caused a size reduction of the amorphous domains in PLA. Consequently, the ability of PLA to accommodate the plasticizer diminished with the increase in crystallinity and migration of the plasticizer occurred. Increasing the molecular weight of the plasticizers by synthesizing oligoesters and oligoesteramides resulted in blends that displayed T(g) depressions slightly smaller than with the monomeric plasticizers. The compatibility with PLA was dependent on the molecular weight of the oligomers and on the presence or not of polar amide groups that were able to positively interact with the PLA chains. Aging the materials at ambient temperature revealed that the enhanced flexibility as well as the morphological stability of the films plasticized with the oligomers could be maintained as a result of the higher molecular weight and the polar interactions with PLA.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Thermal characterization of polylactides
Jamshidi, K., Hyon, S.-H., & Ikada, Y. (1988) · Polymer · doi:10.1016/0032-3861(88)90116-4 · Cited by 692
Crystallization behaviour of poly(l-lactide)
Miyata, T., & Masuko, T. (1998) · Polymer · doi:10.1016/s0032-3861(97)10203-8 · Cited by 498
Dubois, P., Jacobs, C., Jerome, R., & Teyssie, P. (1991) · Macromolecules · doi:10.1021/ma00009a022 · Cited by 477
Polymers: Chemistry and physics of modern materials
Pearce, E. M. (1992) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.1992.080300836 · Cited by 471
Citrate esters as plasticizers for poly(lactic acid)
Labrecque, L. V., Kumar, R. A., Dav�, V., Gross, R. A., & McCarthy, S. P. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971121)66:8<1507::aid-app11>3.0.co;2-0 · Cited by 466
The effects of plasticizers on the dynamic mechanical and thermal properties of poly(lactic acid)
Ljungberg, N., & Wesslén, B. (2002) · Journal of Applied Polymer Science · doi:10.1002/app.11077 · Cited by 423
Self-citationPresent and Future of PLA Polymers
Vert, M., Schwarch, G., & Coudane, J. (1995) · Journal of Macromolecular Science, Part A · doi:10.1080/10601329508010289 · Cited by 365
Research works printed but not linked: 7
- Bonsignore, P. V.; Coleman, R. D.Nonwovens Conference Proceedings; TAPPI Press: Atlanta, GA, 1992; p 129.
- Wehrenberg R. H., II., 1981, Mater. Eng., 94, 63
- Lipinsky E. S., 1986, Chem. Eng. Prog., 82, 26
- Lostocco M. R., 1998, Macromol. Symp.
- Lundgren D., 1996, Patent 5,525,646
- Yolles S., 1976, Parenter. Drug Assoc., 30, 306
- Yolles S., 1978, J. Parenter. Drug Assoc., 32, 188
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Plastics of the Future? The Impact of Biodegradable Polymers on the Environment and on Society
Haider, T. P., Völker, C., Kramm, J., Landfester, K., & Wurm, F. R. (2019) · Angewandte Chemie International Edition · doi:10.1002/anie.201805766 · Cited by 1,591
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Polylactic acid blends: The future of green, light and tough
Hamad, K., Kaseem, M., Ayyoob, M., Joo, J., & Deri, F. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.001 · Cited by 640
Poly(lactic acid) blends in biomedical applications
Saini, P., Arora, M., & Kumar, M. N. V. R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.014 · Cited by 549
Petro‐based and bio‐based plasticizers: Chemical structures to plasticizing properties
Bocqué, M., Voirin, C., Lapinte, V., Caillol, S., & Robin, J. (2016) · Journal of Polymer Science Part A: Polymer Chemistry · doi:10.1002/pola.27917 · Cited by 469
On the Use of PLA-PHB Blends for Sustainable Food Packaging Applications
Arrieta, M., Samper, M., Aldas, M., & López, J. (2017) · Materials · doi:10.3390/ma10091008 · Cited by 415
Green Chemistry: A design framework for sustainability
Beach, E. S., Cui, Z., & Anastas, P. T. (2009) · Energy & Environmental Science · doi:10.1039/b904997p · Cited by 291
Stoclet, G., Seguela, R., Lefebvre, J.-M., & Rochas, C. (2010) · Macromolecules · doi:10.1021/ma101430c · Cited by 271
Strain-Induced Molecular Ordering in Polylactide upon Uniaxial Stretching
Stoclet, G., Seguela, R., Lefebvre, J. M., Elkoun, S., & Vanmansart, C. (2010) · Macromolecules · doi:10.1021/ma9024366 · Cited by 266
Islam, M. S., Pickering, K. L., & Foreman, N. J. (2010) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2010.01.006 · Cited by 260
Hassouna, F., Raquez, J.-M., Addiego, F., Dubois, P., Toniazzo, V., & Ruch, D. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.08.001 · Cited by 257
Herrera, N., Mathew, A. P., & Oksman, K. (2015) · Composites Science and Technology · doi:10.1016/j.compscitech.2014.11.012 · Cited by 246
Microcrystalline cellulose reinforced polylactic acid biocomposite filaments for 3D printing
Murphy, C. A., & Collins, M. N. (2018) · Polymer Composites · doi:10.1002/pc.24069 · Cited by 233
Ma, P., Hristova-Bogaerds, D. G., Goossens, J. G. P., Spoelstra, A. B., Zhang, Y., & Lemstra, P. J. (2012) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.10.015 · Cited by 223
Study of Hydrogen-Bonded Blend of Polylactide with Biodegradable Hyperbranched Poly(ester amide)
Lin, Y., Zhang, K.-Y., Dong, Z.-M., Dong, L.-S., & Li, Y.-S. (2007) · Macromolecules · doi:10.1021/ma070989a · Cited by 218
Characterization and ageing study of poly(lactic acid) films plasticized with oligomeric lactic acid
Burgos, N., Martino, V. P., & Jiménez, A. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.11.009 · Cited by 217
Mechanical, Thermal and Morphological Properties of Poly(lactic acid)/Epoxidized Palm Olein Blend
Silverajah, V. S. G., Ibrahim, N. A., Zainuddin, N., Yunus, W. M. Z. W., & Hassan, H. A. (2012) · Molecules · doi:10.3390/molecules171011729 · Cited by 214
Processing and characterization of plasticized PLA/PHB blends for biodegradable multiphase systems
Armentano, I., Fortunati, E., Burgos, N., Dominici, F., Luzi, F., Fiori, S., Jimenez, A., Yoon, K., Ahn, J., Kang, S., et al. (2015) · Express Polymer Letters · doi:10.3144/expresspolymlett.2015.55 · Cited by 209
Fully biodegradable Poly(lactic acid)/Starch blends: A review of toughening strategies
Koh, J. J., Zhang, X., & He, C. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2017.12.048 · Cited by 200
Thermal, mechanical and rheological properties of poly (lactic acid)/epoxidized soybean oil blends
Ali, F., Chang, Y.-W., Kang, S. C., & Yoon, J. Y. (2009) · Polymer Bulletin · doi:10.1007/s00289-008-1012-9 · Cited by 197
Kakroodi, A. R., Kazemi, Y., Ding, W., Ameli, A., & Park, C. B. (2015) · Biomacromolecules · doi:10.1021/acs.biomac.5b01253 · Cited by 192
Murariu, M., Da Silva Ferreira, A., Alexandre, M., & Dubois, P. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1131 · Cited by 190
Modification of Brittle Polylactide by Novel Hyperbranched Polymer-Based Nanostructures
Bhardwaj, R., & Mohanty, A. K. (2007) · Biomacromolecules · doi:10.1021/bm070367x · Cited by 185
Silverajah, V. S. G., Ibrahim, N. A., Yunus, W. M. Z. W., Hassan, H. A., & Woei, C. B. (2012) · International Journal of Molecular Sciences · doi:10.3390/ijms13055878 · Cited by 183
Choi, K.-M., Choi, M.-C., Han, D.-H., Park, T.-S., & Ha, C.-S. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.05.027 · Cited by 168
Lemmouchi, Y., Murariu, M., Santos, A. M. D., Amass, A. J., Schacht, E., & Dubois, P. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.07.006 · Cited by 167
Islam, M. S., Pickering, K. L., & Foreman, N. J. (2010) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.10.010 · Cited by 163
Melt strengthening of poly (lactic acid) through reactive extrusion with epoxy-functionalized chains
Corre, Y., Duchet‐Rumeau, J., Reignier, J., & Maazouz, A. (2011) · Rheologica Acta · doi:10.1007/s00397-011-0538-1 · Cited by 167
Burgos, N., Tolaguera, D., Fiori, S., & Jiménez, A. (2014) · Journal of Polymers and the Environment · doi:10.1007/s10924-013-0628-5 · Cited by 160
Kakroodi, A. R., Kazemi, Y., Nofar, M., & Park, C. B. (2016) · Chemical Engineering Journal · doi:10.1016/j.cej.2016.09.130 · Cited by 157
Notta‐Cuvier, D., Odent, J., Delille, R., Murariu, M., Lauro, F., Raquez, J., Bennani, B., & Dúbois, P. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.03.007 · Cited by 167
Courgneau, C., Domenek, S., Guinault, A., Avérous, L., & Ducruet, V. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0285-5 · Cited by 165
Meng, B., Deng, J., Liu, Q., Wu, Z., & Yang, W. M. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.10.009 · Cited by 160
Effect of plasticizer on the crystallization behavior of poly(lactic acid)
Xiao, H., Lu, W., & Yeh, J. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29955 · Cited by 169
Mihai, M., Huneault, M. A., & Favis, B. D. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.30338 · Cited by 161
Xu, H., Zhong, G.-J., Fu, Q., Lei, J., Jiang, W., Hsiao, B. S., & Li, Z.-M. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am3019756 · Cited by 143
Hassouna, F., Raquez, J., Addiego, F., Toniazzo, V., Dúbois, P., & Ruch, D. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.12.001 · Cited by 154
Shi, X., Zhang, G., Phuong, T. V., & Lazzeri, A. (2015) · Molecules · doi:10.3390/molecules20011579 · Cited by 148
Coltelli, M., Maggiore, I. D., Bertoldo, M., Signori, F., Bronco, S., & Ciardelli, F. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28512 · Cited by 154
Mallet, B., Lamnawar, K., & Maazouz, A. (2014) · Polymer Engineering & Science · doi:10.1002/pen.23610 · Cited by 130
Cacciotti, I., Mori, S., Cherubini, V., & Nanni, F. M. C. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.02.018 · Cited by 137
Green Processing Route for Polylactic Acid–Cellulose Fiber Biocomposites
Singh, A. A., Genovese, M. E., Mancini, G., Marini, L., & Athanassiou, A. (2020) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b06760 · Cited by 133
Synthesis and characterization of poly(lactic acid) based graft copolymers
Maharana, T., Pattanaik, S., Routaray, A., Nath, N., & Sutar, A. K. (2015) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2015.05.006 · Cited by 134
Are Biobased Plastics Green Alternatives?—A Critical Review
Ferreira-Filipe, D. A., Paço, A., Duarte, A. C., Rocha‐Santos, T., & Silva, A. L. P. (2021) · International Journal of Environmental Research and Public Health · doi:10.3390/ijerph18157729 · Cited by 145
Increase the elongation at break of poly (lactic acid) composites for use in food packaging films
El‐Hadi, A. M. (2017) · Scientific Reports · doi:10.1038/srep46767 · Cited by 136
Tábi, T., Ageyeva, T., & Kovács, J. G. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107282 · Cited by 134
Zhang, L., Li, Y., Wang, H., Qiao, Y., Chen, J., & Cao, S. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.11.066 · Cited by 113
Glass Transitions in Polylactides
Baker, G. L., Vogel, E., & Smith, M. R. (2008) · Journal of macromolecular science. Part C, Reviews in macromolecular chemistry and physics/Journal of macromolecular science. Reviews in macromolecular chemistry and physics · doi:10.1080/15583720701834208 · Cited by 128
Influence of carbon black on the properties of plasticized poly(lactic acid) composites
Wang, N., Zhang, X., Ma, X., & Jianming, F. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.03.023 · Cited by 117
Yu, Z., Yin, J., Yan, S., Xie, Y., Ma, J., & Chen, X. (2007) · Polymer · doi:10.1016/j.polymer.2007.07.024 · Cited by 111
Ma, P., Shen, T., Xu, P., Dong, W., Lemstra, P. J., & Chen, M. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00208 · Cited by 112
Plasticizing effects of citrate esters on properties of poly(lactic acid)
Maiza, M., Benaniba, M. T., & Massardier, V. (2015) · Journal of Polymer Engineering · doi:10.1515/polyeng-2015-0140 · Cited by 114
Bio‐ and oxo‐degradable plastics: Insights on facts and challenges
Abdelmoez, W., Dahab, I., Ragab, E. M., Abdelsalam, O. A., & Mustafa, A. (2021) · Polymers for Advanced Technologies · doi:10.1002/pat.5253 · Cited by 119
Toughening Glassy Poly(lactide) with Block Copolymer Micelles
Li, T., Zhang, J., Schneiderman, D. K., Francis, L. F., & Bates, F. S. (2016) · ACS Macro Letters · doi:10.1021/acsmacrolett.6b00063 · Cited by 105
Ma, P., Spoelstra, A. B., Schmit, P., & Lemstra, P. J. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.01.016 · Cited by 104
Murariu, M., Ferreira, A. D. S., Pluta, M., Bonnaud, L., Alexandre, M., & Dúbois, P. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.07.055 · Cited by 122
Martino, V. P., Ruseckaite, R. A., & Jiménez, A. (2006) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-006-7897-3 · Cited by 121
Xiu, H., Bai, H. W., Huang, C. M., Xu, C. L., Li, X. Y., & Fu, Q. (2013) · Express Polymer Letters · doi:10.3144/expresspolymlett.2013.24 · Cited by 103
Biodegradation of poly(lactic acid) and some of its based systems with Trichoderma viride
Lipşa, R., Tudorachi, N., Darie-Niță, R. N., Oprica, L. A., Vasile, C., & Chiriac, A. P. (2016) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2016.04.017 · Cited by 103
Bhasney, S. M., Patwa, R., Kumar, A., & Katiyar, V. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45390 · Cited by 106
Graphene modifications in polylactic acid nanocomposites: a review
Norazlina, H., & Kamal, Y. (2015) · Polymer Bulletin · doi:10.1007/s00289-015-1308-5 · Cited by 108
Effect of crystallization on barrier properties of formulated polylactide
Courgneau, C., Domenek, Lebossé, R., Guinault, A., Avérous, L., & Ducruet, V. (2012) · Polymer International · doi:10.1002/pi.3167 · Cited by 91
Avolio, R., Castaldo, R., Gentile, G., Ambrogi, V., Fiori, S., Avella, M., Cocca, M., & Errico, M. E. (2015) · European Polymer Journal · doi:10.1016/j.eurpolymj.2015.02.040 · Cited by 98
Greco, A., & Ferrari, F. (2020) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-020-10403-9 · Cited by 94
Miscibility, mechanical and thermal properties of poly(lactic acid)/polyester-diol blends
Okamoto, K., Ichikawa, T., Yokohara, T., & Yamaguchi, M. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.05.011 · Cited by 85
Zhong, Y., Fang, H., Zhang, Y., Wang, Z., Yang, J., & Wang, Z. (2013) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc400040b · Cited by 90
Li, Y., & Sun, X. S. (2010) · Biomacromolecules · doi:10.1021/bm100320q · Cited by 87
Tsou, C., Suen, M., Yao, W.-H., Yeh, J., Wu, C.-S., Tsou, C., Chiu, S., Chen, J., Wang, R., Lin, S., et al. (2014) · Materials · doi:10.3390/ma7085617 · Cited by 89
Shojaeiarani, J., Bajwa, D. S., & Stark, N. M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.02.069 · Cited by 92
Tiozon, R. N., Bonto, A. P., & Sreenivasulu, N. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.09.194 · Cited by 88
Kunststoffe der Zukunft? Der Einfluss von bioabbaubaren Polymeren auf Umwelt und Gesellschaft
Haider, T. P., Völker, C., Kramm, J., Landfester, K., & Wurm, F. R. (2018) · Angewandte Chemie · doi:10.1002/ange.201805766 · Cited by 84
Microcellular processing of polylactide–hyperbranched polyester–nanoclay composites
Pilla, S., Kramschuster, A., Lee, J., Clemons, C. C., Gong, S., & Turng, L. (2010) · Journal of Materials Science · doi:10.1007/s10853-010-4261-6 · Cited by 83
Qin, Y., Yang, J., & Xue, J. (2014) · Journal of Materials Science · doi:10.1007/s10853-014-8671-8 · Cited by 79
GÜMÜŞ, S., Özkoç, G., & Aytaç, A. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.34841 · Cited by 85
Guerin, W., Helou, M., Carpentier, J.-F., Slawinski, M., Brusson, J.-M., & Guillaume, S. M. (2013) · Polym. Chem. · doi:10.1039/c2py20859h · Cited by 75
Islam, M. S., Pickering, K. L., & Foreman, N. J. (2010) · Journal of Polymers and the Environment · doi:10.1007/s10924-010-0225-9 · Cited by 82
Martino, V. P., Jiménez, A., Ruseckaite, R. A., & Avérous, L. (2010) · Polymers for Advanced Technologies · doi:10.1002/pat.1747 · Cited by 80
Poly(lactic acid)-Based Materials for Automotive Applications
Bouzouita, A., Notta‐Cuvier, D., Raquez, J., Lauro, F., & Dúbois, P. (2017) · Advances in polymer science · doi:10.1007/12_2017_10 · Cited by 78
Plastics additives and green chemistry
Beach, E. S., Weeks, B. R., Stern, R., & Anastas, P. T. (2013) · Pure and Applied Chemistry · doi:10.1351/pac-con-12-08-08 · Cited by 78
Oliveira, J. E., Medeiros, E. S., Cardozo, L., Voll, F., Madureira, E. H., Mattoso, L. H. C., & Assis, O. B. G. (2013) · Materials Science and Engineering: C · doi:10.1016/j.msec.2012.10.032 · Cited by 70
Shape memory effect on electrospun PLA-based fibers tailoring their thermal response
Leonés, A., Sonseca, Á., López, D., Fiori, S., & Peponi, L. (2019) · European Polymer Journal · doi:10.1016/j.eurpolymj.2019.05.014 · Cited by 76
Gálvez, J., Aguirre, J. P. C., Hidalgo‐Salazar, M. A., Mondragón, B. V., Wagner, E., & Caicedo, C. (2020) · Polymers · doi:10.3390/polym12092111 · Cited by 80
Andersson, S. R., Hakkarainen, M., & Albertsson, A. (2010) · Biomacromolecules · doi:10.1021/bm101075p · Cited by 80
Embracing Sustainability: The World of Bio-Based Polymers in a Mini Review
Righetti, G. I. C., Faedi, F., & Famulari, A. (2024) · Polymers · doi:10.3390/polym16070950 · Cited by 75
Poly(Lactic Acid) and Poly(Butylene Succinate) Blend Fibers Prepared by Melt Spinning Technique
Jompang, L., Thumsorn, S., Wongon, J., Surin, P., Apawet, C., Chaichalermvong, T., Kaabbuathong, N., O-Charoen, N., & Srisawat, N. (2013) · Energy Procedia · doi:10.1016/j.egypro.2013.06.777 · Cited by 72
Biodegradable polymeric microcapsules: Preparation and properties
Sawalha, H., Schroën, K. G. P. H., & Boom, R. M. (2011) · Chemical Engineering Journal · doi:10.1016/j.cej.2011.02.078 · Cited by 70
Ageing of poly(lactic acid) films plasticized with commercial polyadipates
Martino, V. P., Ruseckaite, R. A., & Jiménez, A. (2009) · Polymer International · doi:10.1002/pi.2556 · Cited by 69
Tanrattanakul, V., & Bunkaew, P. (2014) · eXPRESS Polymer Letters · doi:10.3144/expresspolymlett.2014.43 · Cited by 66
Boron Nitride reinforced polylactic acid composites film for packaging: Preparation and properties
Bindhu, B., Renisha, R., Roberts, L., & Varghese, T. O. (2018) · Polymer Testing · doi:10.1016/j.polymertesting.2018.01.018 · Cited by 67
Cellulose modified by citric acid reinforced Poly(lactic acid) resin as fillers
Cui, X., Ozaki, A., Asoh, T., & Uyama, H. (2020) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2020.109118 · Cited by 65
Kurusu, R. S., Siliki, C. A., David, É., Demarquette, N. R., Gauthier, C., & Chenal, J. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2014.12.040 · Cited by 63
Arjmandi, R., Hassan, A., Kassim, M. H. M., Zakaria, Z., & Islam, M. S. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.11.028 · Cited by 64
Epoxidized Jatropha Oil as a Sustainable Plasticizer to Poly(lactic Acid)
Chieng, B. W., Ibrahim, N. A., Then, Y. Y., & Loo, Y. Y. (2017) · Polymers · doi:10.3390/polym9060204 · Cited by 61
Levulinic Acid as a Versatile Building Block for Plasticizer Design
Xuan, W., Hakkarainen, M., & Odelius, K. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02439 · Cited by 64
Epoxidized soybean oil‐plasticized poly(lactic acid) films performance as impacted by storage
Xing, C., & Matuana, L. M. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.43201 · Cited by 62
Surface modification of cellulose nanofiber using acid anhydride for poly(lactic acid) reinforcement
Jamaluddin, N., Kanno, T., Asoh, T., & Uyama, H. (2019) · Materials Today Communications · doi:10.1016/j.mtcomm.2019.100587 · Cited by 59
Mechanical and morphological properties of high density polyethylene and polylactide blends
Madhu, G., Bhunia, H., Bajpai, P., & Chaudhary, V. (2014) · Journal of Polymer Engineering · doi:10.1515/polyeng-2013-0174 · Cited by 60
Metadata
- Authors
- Ljungberg, N., & Wesslén, B.
- Affiliations
- Lund University (SE)
- Corresponding author
- Ljungberg, Nadia
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2005-04-08
- Volume
- 6
- Issue
- 3
- Pages
- 1789-1796
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2007200637
- Cited by
- 331
- References
- 42
- Citations by year
- 2026: 9 · 2025: 5 · 2024: 22 · 2023: 15 · 2022: 14 · 2021: 13 · 2020: 19 · 2019: 12 · 2018: 19 · 2017: 20 · 2016: 30 · 2015: 21 · 2014: 24 · 2013: 25 · 2012: 16
- FWCI
- 2.74
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- HAL (submittedVersion)
- Lund University Publications (Lund University) (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Science and PVC
- Keywords
- polylactic acid, plasticized films, plasticizers, tributyl citrate, oligoesters, glass transition temperature depression, cold crystallization, plasticizer migration, polymer blends, blend compatibility, aging materials, flexibility, crystallinity
- MeSH terms
- Plasticizers, Polyesters, Polymers, Lactic Acid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.