Plasticization of Poly(l-lactide) with Poly(propylene glycol)
The DOI matches its Crossref record; 26 of the 26 references it cites were found in a registry or an index.
Abstract
A new plasticizer for poly(L-lactide) (PLA)-poly(propylene glycol) (PPG) is proposed. The advantage of using PPG is that it does not crystallize, has low glass transition temperature, and is miscible with PLA. PLA was plasticized with PPGs with nominal Mw of 425 and 1000 g/mol. Poly(ethylene glycol) (PEG), long known as a plasticizer for PLA, with nominal Mw of 600 g/mol, was also used to plasticize PLA for comparison. The thermal and tensile properties of PLA and PLA with 5-12.5 wt % of the plasticizers were studied. In blends of PLA with PPGs the glass transition temperature was lower than that of neat PLA. Both PPGs enhanced the crystallizability of PLA albeit less than PEG. All of the plasticizers increased also the ability of PLA to plastic deformation which was reflected in a decrease of yield stress and in an increase of elongation at break. The effect was enhanced by the higher PPG content and also by lower molecular weight of PPG. A phase separation occurred only in the blend containing 12.5 wt % of PPG with higher molecular weight. The evidences of crazing were found in deformed samples of PLA with low plasticizer content, whereas the samples with higher content of plasticizers crystallized due to deformation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Thermal characterization of polymeric materials
(1997) · Choice Reviews Online · doi:10.5860/choice.35-0290 · Cited by 657
Thermal and mechanical properties of plasticized poly(L‐lactic acid)
Baiardo, M., Frisoni, G., Scandola, M., Rimelen, M., Lips, D., Ruffieux, K., & Wintermantel, E. (2003) · Journal of Applied Polymer Science · doi:10.1002/app.12549 · Cited by 568
Mechanism of the Stereocomplex Formation between Enantiomeric Poly(lactide)s
Brizzolara, D., Cantow, H.-J., Diederichs, K., Keller, E., & Domb, A. J. (1996) · Macromolecules · doi:10.1021/ma951144e · Cited by 547
Crystallization, structure and properties of plasticized poly(l-lactide)
Kulinski, Z., & Piorkowska, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.07.101 · Cited by 540
Self-citationPlasticizing polylactide—the effect of different plasticizers on the mechanical properties
Jacobsen, S., & Fritz, H. G. (1999) · Polymer Engineering & Science · doi:10.1002/pen.11517 · Cited by 540
Crystallization and Melting Behavior of Polylactides
Sarasua, J.-R., Prud'homme, R. E., Wisniewski, M., Le Borgne, A., & Spassky, N. (1998) · Macromolecules · doi:10.1021/ma971545p · Cited by 525
Concise polymeric materials encyclopedia
(1999) · Choice Reviews Online · doi:10.5860/choice.36-3664 · Cited by 494
Nijenhuis, A. J., Colstee, E., Grijpma, D. W., & Pennings, A. J. (1996) · Polymer · doi:10.1016/s0032-3861(96)00455-7 · Cited by 479
Citrate esters as plasticizers for poly(lactic acid)
Labrecque, L. V., Kumar, R. A., Dav�, V., Gross, R. A., & McCarthy, S. P. (1997) · Journal of Applied Polymer Science · doi:10.1002/(sici)1097-4628(19971121)66:8<1507::aid-app11>3.0.co;2-0 · Cited by 466
Research works printed but not linked: 2
- Pluta M., 2006, Part B: Polym. Phys
- Cyras V. P., 1999, Polym. Intern., 48, 705, 10.1002/(SICI)1097-0126(199908)48:8<705::AID-PI205>3.0.CO;2-P · doi:10.1002/(sici)1097-0126(199908)48:8<705::aid-pi205>3.0.co;2-p
Cited by
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Poly(lactic acid) modifications
Rasal, R. M., Janorkar, A. V., & Hirt, D. E. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.12.003 · Cited by 2,204
Poly(lactic acid) crystallization
Saeidlou, S., Huneault, M. A., Li, H., & Park, C. B. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2012.07.005 · Cited by 1,606
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Research progress in toughening modification of poly(lactic acid)
Liu, H., & Zhang, J. (2011) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.22283 · Cited by 767
Poly(lactic acid) blends in biomedical applications
Saini, P., Arora, M., & Kumar, M. N. V. R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.014 · Cited by 549
Polylactides—Chemistry, Properties and Green Packaging Technology: A Review
Ahmed, J., & Varshney, S. K. (2011) · International Journal of Food Properties · doi:10.1080/10942910903125284 · Cited by 454
Plasticization of semicrystalline poly(l-lactide) with poly(propylene glycol)
Piorkowska, E., Kulinski, Z., Galeski, A., & Masirek, R. (2006) · Polymer · doi:10.1016/j.polymer.2006.03.115 · Cited by 301
Self-citationHassouna, F., Raquez, J.-M., Addiego, F., Dubois, P., Toniazzo, V., & Ruch, D. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.08.001 · Cited by 257
Tailoring crystallization: towards high-performance poly(lactic acid)
Liu, G., Zhang, X., & Wang, D. (2014) · Advanced Materials · doi:10.1002/adma.201305413 · Cited by 249
Study of Hydrogen-Bonded Blend of Polylactide with Biodegradable Hyperbranched Poly(ester amide)
Lin, Y., Zhang, K.-Y., Dong, Z.-M., Dong, L.-S., & Li, Y.-S. (2007) · Macromolecules · doi:10.1021/ma070989a · Cited by 218
Characterization and ageing study of poly(lactic acid) films plasticized with oligomeric lactic acid
Burgos, N., Martino, V. P., & Jiménez, A. (2013) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.11.009 · Cited by 217
Murariu, M., Da Silva Ferreira, A., Alexandre, M., & Dubois, P. (2008) · Polymers for Advanced Technologies · doi:10.1002/pat.1131 · Cited by 190
Chu, Z., Zhao, T., Li, L., Fan, J., & Qin, Y. (2017) · Materials · doi:10.3390/ma10060659 · Cited by 189
Naser, A. Z., Deiab, I., Defersha, F., & Yang, S. (2021) · Polymers · doi:10.3390/polym13234271 · Cited by 180
Kfoury, G., Raquez, J.-M., Hassouna, F., Odent, J., Toniazzo, V., Ruch, D., & Dubois, P. (2013) · Frontiers in Chemistry · doi:10.3389/fchem.2013.00032 · Cited by 182
Structural, mechanical and barrier properties of active PLA–antioxidant films
Jamshidian, M., Tehrany, E. A., Imran, M., Akhtar, M. J., Cleymand, F., & Desobry, S. (2012) · Journal of Food Engineering · doi:10.1016/j.jfoodeng.2011.12.034 · Cited by 171
Flash Nanoprecipitation: Particle Structure and Stability
Pustulka, K. M., Wohl, A. R., Lee, H. S., Michel, A. R., Han, J., Hoye, T. R., McCormick, A. V., Panyam, J., & Macosko, C. W. (2013) · Molecular Pharmaceutics · doi:10.1021/mp400337f · Cited by 169
Choi, K.-M., Choi, M.-C., Han, D.-H., Park, T.-S., & Ha, C.-S. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2013.05.027 · Cited by 168
Wu, C.-S. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.04.002 · Cited by 165
Xie, L., Xu, H., Niu, B., Ji, X., Chen, J., Li, Z.-M., Hsiao, B. S., & Zhong, G.-J. (2014) · Biomacromolecules · doi:10.1021/bm5010993 · Cited by 164
Notta‐Cuvier, D., Odent, J., Delille, R., Murariu, M., Lauro, F., Raquez, J., Bennani, B., & Dúbois, P. (2014) · Polymer Testing · doi:10.1016/j.polymertesting.2014.03.007 · Cited by 167
Han, J., & Huang, H. (2011) · Journal of Applied Polymer Science · doi:10.1002/app.33338 · Cited by 156
Courgneau, C., Domenek, S., Guinault, A., Avérous, L., & Ducruet, V. (2011) · Journal of Polymers and the Environment · doi:10.1007/s10924-011-0285-5 · Cited by 165
Bao, R.-Y., Yang, W., Wei, X.-F., Xie, B.-H., & Yang, M.-B. (2014) · ACS Sustainable Chemistry & Engineering · doi:10.1021/sc500464c · Cited by 152
A method for simultaneously improving the flame retardancy and toughness of PLA
Song, Y., Wang, D., Wang, X., Lin, L., & Wang, Y. (2010) · Polymers for Advanced Technologies · doi:10.1002/pat.1760 · Cited by 156
Li, F., Zhang, S., Liang, J., & Wang, J. (2015) · Polymers for Advanced Technologies · doi:10.1002/pat.3475 · Cited by 160
Effect of plasticizer on the crystallization behavior of poly(lactic acid)
Xiao, H., Lu, W., & Yeh, J. (2009) · Journal of Applied Polymer Science · doi:10.1002/app.29955 · Cited by 169
Hassouna, F., Raquez, J., Addiego, F., Toniazzo, V., Dúbois, P., & Ruch, D. (2011) · European Polymer Journal · doi:10.1016/j.eurpolymj.2011.12.001 · Cited by 154
Shi, X., Zhang, G., Phuong, T., & Lazzeri, A. (2015) · Molecules · doi:10.3390/molecules20011579 · Cited by 135
Coltelli, M., Maggiore, I. D., Bertoldo, M., Signori, F., Bronco, S., & Ciardelli, F. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.28512 · Cited by 135
Zhou, S.-Y., Huang, H.-D., Ji, X., Yan, D.-X., Zhong, G.-J., Hsiao, B. S., & Li, Z.-M. (2016) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b00451 · Cited by 131
Research progress in the heat resistance, toughening and filling modification of PLA
Yang, Y., Zhang, L., Xiong, Z., Tang, Z., Zhang, R., & Zhu, J. (2016) · Science China Chemistry · doi:10.1007/s11426-016-0222-7 · Cited by 137
Increase the elongation at break of poly (lactic acid) composites for use in food packaging films
El-hadi, A. M. (2017) · Scientific Reports · doi:10.1038/srep46767 · Cited by 123
Wang, H., Feng, Y., Fang, Z., Yuan, W., & Khan, M. (2012) · Materials Science and Engineering C · doi:10.1016/j.msec.2012.07.001 · Cited by 129
Tábi, T., Ageyeva, T., & Kovács, J. G. (2021) · Polymer Testing · doi:10.1016/j.polymertesting.2021.107282 · Cited by 119
Jariyasakoolroj, P., Tashiro, K., Wang, H., Yamamoto, H., Chinsirikul, W., Kerddonfag, N., & Chirachanchai, S. (2015) · Polymer · doi:10.1016/j.polymer.2015.05.006 · Cited by 125
Dominant β-Form of Poly( l -lactic acid) Obtained Directly from Melt under Shear and Pressure Fields
Ru, J., Yang, S.-G., Zhou, D., Yin, H., Lei, J., & Li, Z. (2016) · Macromolecules · doi:10.1021/acs.macromol.6b00595 · Cited by 115
Zhang, L., Li, Y., Wang, H., Qiao, Y., Chen, J., & Cao, S. (2014) · Chemical Engineering Journal · doi:10.1016/j.cej.2014.11.066 · Cited by 113
Glass Transitions in Polylactides
Baker, G., Vogel, E., & Smith, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834208 · Cited by 111
Influence of carbon black on the properties of plasticized poly(lactic acid) composites
Wang, N., Zhang, X., Ma, X., & Jianming, F. (2008) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2008.03.023 · Cited by 117
Quiles‐Carrillo, L., Duart, S., Muñoz, N. M., Torres‐Giner, S., & Balart, R. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.11.031 · Cited by 115
Isosorbide dioctoate as a “green” plasticizer for poly(lactic acid)
Yang, Y., Xiong, Z., Zhang, L., Tang, Z., Zhang, R., & Zhu, J. (2015) · Materials & Design · doi:10.1016/j.matdes.2015.11.065 · Cited by 115
Zupančič, E., Curato, C., Paisana, M. C., Rodrigues, C. A. B., Porat, Z., Viana, A. S., Afonso, C. A. M., Pinto, J. F., Gaspar, R. S., Moreira, J. N., et al. (2017) · Journal of Controlled Release · doi:10.1016/j.jconrel.2017.05.014 · Cited by 110
Murariu, M., Ferreira, A. D. S., Pluta, M., Bonnaud, L., Alexandre, M., & Dúbois, P. (2008) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.07.055 · Cited by 122
Xiu, H., Bai, H. W., Huang, C. M., Xu, C. L., Li, X. Y., & Fu, Q. (2013) · Express Polymer Letters · doi:10.3144/expresspolymlett.2013.24 · Cited by 103
Bhasney, S. M., Patwa, R., Kumar, A., & Katiyar, V. (2017) · Journal of Applied Polymer Science · doi:10.1002/app.45390 · Cited by 106
Graphene modifications in polylactic acid nanocomposites: a review
Norazlina, H., & Kamal, Y. (2015) · Polymer Bulletin · doi:10.1007/s00289-015-1308-5 · Cited by 108
Employing a novel bioelastomer to toughen polylactide
Kang, H., Qiao, B., Wang, R., Wang, Z., Zhang, L., Ma, J., & Coates, P. (2013) · Polymer · doi:10.1016/j.polymer.2013.02.053 · Cited by 94
Essa, S., Rabanel, J., & Hildgen, P. (2010) · European Journal of Pharmaceutics and Biopharmaceutics · doi:10.1016/j.ejpb.2010.03.002 · Cited by 99
Effect of crystallization on barrier properties of formulated polylactide
Courgneau, C., Domenek, Lebossé, R., Guinault, A., Avérous, L., & Ducruet, V. (2012) · Polymer International · doi:10.1002/pi.3167 · Cited by 91
Vega, E., Egea, Calpena, A. C., Espina, M., & García (2012) · International Journal of Nanomedicine · doi:10.2147/ijn.s28481 · Cited by 102
Chaos, A., Sangroniz, A., González, A., Iriarte, M., Sarasua, J.-R., del Río, J., & Etxeberria, A. (2018) · Polymer International · doi:10.1002/pi.5705 · Cited by 87
Wang, Y., Mei, Y., Wang, Q., Wei, W., Huang, F., Li, Y., Li, J., & Zhou, Z. (2018) · Composites Part B Engineering · doi:10.1016/j.compositesb.2018.10.060 · Cited by 88
Renewable malic acid-based plasticizers for both PVC and PLA polymers
Park, M., Choi, I., Lee, S., Hong, S.-J., Kim, A., Shin, J., Kang, H., & Kim, Y. (2020) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2020.04.007 · Cited by 87
Miscibility, mechanical and thermal properties of poly(lactic acid)/polyester-diol blends
Okamoto, K., Ichikawa, T., Yokohara, T., & Yamaguchi, M. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2009.05.011 · Cited by 85
Bartos, A., Nagy, K., Anggono, J., Antoni, A., Purwaningsih, H., Móczó, J., & Pukánszky, B. (2021) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2021.106273 · Cited by 88
Tsou, C., Suen, M., Yao, W.-H., Yeh, J., Wu, C.-S., Tsou, C., Chiu, S., Chen, J., Wang, R., Lin, S., et al. (2014) · Materials · doi:10.3390/ma7085617 · Cited by 89
Mechanical and Thermal Properties of Green Polylactide Composites with Natural Fillers
Lezak, E., Kulinski, Z., Masirek, R., Piórkowska, E., Pracellà, M., & Gadzinowska, K. (2008) · Macromolecular Bioscience · doi:10.1002/mabi.200800040 · Cited by 92
Self-citationWu, Y., Qin, Y., Yuan, M., Li, L., Chen, H., Cao, J., & Yang, J. (2014) · Polymers for Advanced Technologies · doi:10.1002/pat.3332 · Cited by 81
Shi, X., Qin, J., Wang, L., Ren, L., Rong, F., Li, D., Wang, R., & Zhang, G. (2018) · RSC Advances · doi:10.1039/c8ra01570h · Cited by 81
Sun, Z., Zhang, B., Bian, X., Feng, L., Zhang, H., Duan, R., Sun, J., Pang, X., Chen, W., & Chen, X. (2015) · RSC Advances · doi:10.1039/c5ra11019j · Cited by 79
Andrzejewski, J., Das, S., Lipik, V. T., Mohanty, A. K., Misra, M., You, X., Tan, L. P., & Chang, B. P. (2024) · Materials · doi:10.3390/ma17184556 · Cited by 87
Sharma, S., Singh, A. A., Majumdar, A., & Butola, B. S. (2019) · Journal of Materials Science · doi:10.1007/s10853-019-03521-9 · Cited by 81
Preparation and characterization of thermoplastic starches and their blends with poly(lactic acid)
Yang, Y., Tang, Z., Xiong, Z., & Zhu, J. (2015) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2015.03.053 · Cited by 75
Barrier Properties and Characterizations of Poly(lactic Acid)/ZnO Nanocomposites
Tang, Z., Fan, F., Chu, Z., Fan, C., & Qin, Y. (2020) · Molecules · doi:10.3390/molecules25061310 · Cited by 75
Properties Investigation of Epoxidized Sunflower Oil as Bioplasticizer for Poly (Lactic Acid)
Bouti, M., Irinislimane, R., & Belhaneche‐Bensemra, N. (2021) · Journal of Polymers and the Environment · doi:10.1007/s10924-021-02194-3 · Cited by 74
Formulating bioplastic composites for biodegradability, recycling, and performance: A Review
Hubbe, M. A., Lavoine, N., Lucia, L. A., & Dou, C. (2020) · BioResources · doi:10.15376/biores.16.1.hubbe · Cited by 85
Andersson, S. R., Hakkarainen, M., & Albertsson, A. (2010) · Biomacromolecules · doi:10.1021/bm101075p · Cited by 80
Embracing Sustainability: The World of Bio-Based Polymers in a Mini Review
Righetti, G. I. C., Faedi, F., & Famulari, A. (2024) · Polymers · doi:10.3390/polym16070950 · Cited by 75
Battegazzore, D., Bocchini, S., Alongi, J., & Frache, A. (2014) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2014.03.003 · Cited by 71
Ross, G. M., Ross, S., & Tighe, B. J. (2016) · Elsevier eBooks · doi:10.1016/b978-0-323-35824-8.00023-2 · Cited by 76
Xu, H., Xie, L., Chen, J.-B., Jiang, X. Q., Hsiao, B. S., Zhong, G., Fu, Q., & Li, Z. (2014) · Materials Horizons · doi:10.1039/c4mh00085d · Cited by 65
Ageing of poly(lactic acid) films plasticized with commercial polyadipates
Martino, V. P., Ruseckaite, R. A., & Jiménez, A. (2009) · Polymer International · doi:10.1002/pi.2556 · Cited by 69
Jia, P., Hu, J., Zhai, W., Duan, Y., Zhang, J., & Han, C. (2015) · Industrial & Engineering Chemistry Research · doi:10.1021/ie504345y · Cited by 63
Mechanisms of plastic deformation in biodegradable polylactide/poly(1,4‐cis‐isoprene) blends
Kowalczyk, M., & Piorkowska, E. (2012) · Journal of Applied Polymer Science · doi:10.1002/app.35489 · Cited by 61
Gao, X., Qi, S., Zhang, D., Su, Y., & Wang, D. (2020) · Additive manufacturing · doi:10.1016/j.addma.2020.101414 · Cited by 70
McCutcheon, C. J., Zhao, B., Jin, K., Bates, F. S., & Ellison, C. J. (2020) · Macromolecules · doi:10.1021/acs.macromol.0c01759 · Cited by 65
Benkraled, L., Zennaki, A., Zair, L., Arabeche, K., Berrayah, A., Barrera, A., Bouberka, Z., & Maschke, U. (2024) · Polymers · doi:10.3390/polym16070974 · Cited by 70
Pharmaceutically Used Plasticizers
Šnejdrová, E., & Dittrich, M. (2012) · InTech eBooks · doi:10.5772/39190 · Cited by 76
Alam, J., Alam, M., Mohan, R., Abduljaleel, Z., & Dass, L. A. (2014) · International Journal of Molecular Sciences · doi:10.3390/ijms151119924 · Cited by 63
Shi, X., Zhang, G., Liu, Y., Ma, Z., Jing, Z., & Fan, X. (2016) · Polymers for Advanced Technologies · doi:10.1002/pat.3768 · Cited by 62
Quiles‐Carrillo, L., Muñoz, N. M., Lagaron, J. M., Balart, R., & Torres‐Giner, S. (2018) · Polymer International · doi:10.1002/pi.5588 · Cited by 60
Li, L., Bao, R., Gao, T., Liu, Z., Xie, B., Yang, M., & Yang, W. M. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.09.057 · Cited by 59
Chen, L., & Dou, Q. (2019) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-019-08507-y · Cited by 59
Shozui, F., Matsumoto, K., Nakai, T., Yamada, M., & Taguchi, S. (2009) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-009-2100-y · Cited by 57
Xu, H., Xie, L., Jiang, X. Q., Li, X., Li, Y., Zhang, Z., Zhong, G., & Li, Z. (2013) · The Journal of Physical Chemistry B · doi:10.1021/jp409021q · Cited by 60
Tan, J., Zhang, S., Lu, T., Li, R., Zhong, T., & Zhu, X. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.395 · Cited by 55
Toughening Modification of Polylactic Acid by Thermoplastic Silicone Polyurethane Elastomer
Sun, M., Huang, S., Yu, M., & Han, K. (2021) · Polymers · doi:10.3390/polym13121953 · Cited by 56
Esters of Tartaric Acid, A New Class of Potential “Double Green” Plasticizers
Zawada, K., Plichta, A., Jańczewski, D., Hajmowicz, H., Florjańczyk, Z., Stępień, M., Sobiecka, A., & Synoradzki, L. (2017) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b00814 · Cited by 54
Sharma, S., Singh, A. A., Majumdar, A., & Butola, B. S. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.107845 · Cited by 52
Physical ageing and molecular mobility in PLA blends and composites
Müller, P., Imre, B., Bere, J., Móczó, J., & Pukánszky, B. (2015) · Journal of Thermal Analysis and Calorimetry · doi:10.1007/s10973-015-4831-6 · Cited by 60
Wang, B., Hina, K., Zou, H., Zuo, D., & Yi, C. (2018) · Journal of Vinyl and Additive Technology · doi:10.1002/vnl.21619 · Cited by 54
Cardanol derivatives as innovative bio-plasticizers for poly-(lactic acid)
Greco, A., & Maffezzoli, A. (2016) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2016.02.020 · Cited by 51
Thermal, mechanical, and rheological properties of polylactide/poly(1,2‐propylene glycol adipate)
Zhang, H., Fang, J., Ge, H., Han, L., Wang, X., Hao, Y., Han, C., & Dong, L. (2012) · Polymer Engineering and Science · doi:10.1002/pen.23238 · Cited by 51
Yang, S., Wu, Z., Meng, B., & Yang, W. M. (2009) · Journal of Polymer Science Part B Polymer Physics · doi:10.1002/polb.21716 · Cited by 58
Compatibility, steady and dynamic rheological behaviors of polylactide/poly(ethylene glycol) blends
Li, F., Tan, L., Zhang, S., & Zhu, B. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.42919 · Cited by 54
Effect of plasticizer on drug crystallinity of hydroxypropyl methylcellulose matrix film
Panda, B., Parihar, A. S., & Mallick, S. (2014) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2014.03.033 · Cited by 52
Nonisothermal crystallization kinetics of poly(lactide)—effect of plasticizers and nucleating agent
Courgneau, C., Ducruet, V., Avérous, L., Grenet, J., & Domenek, S. (2013) · Polymer Engineering & Science · doi:10.1002/pen.23357 · Cited by 46
Tan, J., Lu, T., Li, R., Zhang, S., Liu, W., Zhu, X., Zhang, J., & Xin, J. (2019) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.9b02312 · Cited by 47
Metadata
- Authors
- Kulinski, Z., Piorkowska, E., Gadzinowska, K., & Stasiak, M.
- Affiliations
- Centrum Badań Molekularnych i Makromolekularnych Polskiej Akademii Nauk (PL)
- Centre of Molecular and Macromolecular Studies, Polish Academy of Sciences, 90 363 Lodz, Poland
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2006-06-06
- Volume
- 7
- Issue
- 7
- Pages
- 2128-2135
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2088024029
- Cited by
- 320
- References
- 25
- Citations by year
- 2026: 7 · 2025: 12 · 2024: 15 · 2023: 14 · 2022: 12 · 2021: 13 · 2020: 19 · 2019: 15 · 2018: 19 · 2017: 29 · 2016: 26 · 2015: 20 · 2014: 27 · 2013: 18 · 2012: 15
- FWCI
- 5.14
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer crystallization and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer composites and self-healing
- Keywords
- poly(L-lactic acid), polypropylene glycol, plasticizers, polyethylene glycol, polymer blends, glass transition temperature, crystallization, tensile properties, yield stress, elongation at break, phase separation, crazing, molecular weight effects
- MeSH terms
- Calorimetry, Differential Scanning, Hot Temperature, Microscopy, Electron, Scanning, Microscopy, Polarization, Plastics, Polyesters, Tensile Strength, Propylene Glycol
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.