The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
All-Cellulose Composite Prepared by Selective Dissolving of Fiber Surface
Abstract
An all-cellulose composite was prepared from conventional filter paper by converting a selective dissolved fiber surface into a matrix. The structure and mechanical, thermal, and optical properties of this composite were investigated using X-ray diffraction, a scanning electron microscope, an optical microscope, a tensile test, and dynamic viscoelastic analyses. After optimizing the immersion condition of the filter paper in a solvent, the fibers, with selectively dissolved surfaces, were unified by compression followed by drying. The tensile strength of the composite reached 211 MPa at 25 degrees C, isotropically. This value was comparable or even higher than those of conventional glass-fiber-mat-reinforced composites. The composites possessed a high storage modulus of more than 20 GPa at -150 degrees C, and a storage modulus of the GPa order was maintained up to around 250 degrees C. The good interface is considered to bring optical transparency to this composite. In addition, this composite is composed of sustainable resources and is biodegradable after service, which gives it advantages with regard to disposal, composting, and incineration.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Composites reinforced with cellulose based fibres
Bledzki, A. (1999) · Progress in Polymer Science · doi:10.1016/s0079-6700(98)00018-5 · Cited by 4,696
Cited by
Review: current international research into cellulose nanofibres and nanocomposites
Eichhorn, S. J., Dufresne, A., Aranguren, M., Marcovich, N. E., Capadona, J. R., Rowan, S. J., Weder, C., Thielemans, W., Roman, M., Renneckar, S., et al. (2010) · Journal of Materials Science · doi:10.1007/s10853-009-3874-0 · Cited by 2,418
Recent advances in regenerated cellulose materials
Wang, S., Lu, A., & Zhang, L. (2016) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.07.003 · Cited by 1,033
Cellulosic nanocomposites: a review
(2008) · BioResources · doi:10.15376/biores.3.3.929-980 · Cited by 901
Review of the recent developments in cellulose nanocomposite processing
Oksman, K., Aitomäki, Y., Mathew, A. P., Siqueira, G., Zhou, Q., Butylina, S., Tanpichai, S., Zhou, X., & Hooshmand, S. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.041 · Cited by 712
Recent advances in surface-modified cellulose nanofibrils
Rol, F., Belgacem, M. N., Gandini, A., & Bras, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.09.002 · Cited by 698
Gandini, A. (2011) · Green Chemistry · doi:10.1039/c0gc00789g · Cited by 695
Cellulose reinforced polymer composites and nanocomposites: a critical review
Miao, C., & Hamad, W. Y. (2013) · Cellulose · doi:10.1007/s10570-013-0007-3 · Cited by 630
From monomers to polymers from renewable resources: Recent advances
Gandini, A., & Lacerda, T. M. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.11.002 · Cited by 620
Transparent paper: fabrications, properties, and device applications
Zhu, H., Fang, Z., Preston, C., Li, Y., & Hu, L. (2014) · Energy Environ. Sci. · doi:10.1039/c3ee43024c · Cited by 550
Novel Nanostructured Paper with Ultrahigh Transparency and Ultrahigh Haze for Solar Cells
Fang, Z., Zhu, H., Yuan, Y., Ha, D., Zhu, S., Preston, C., Chen, Q., Li, Y., Han, X., Lee, S., et al. (2014) · Nano Letters · doi:10.1021/nl404101p · Cited by 489
A critical review of all-cellulose composites
Huber, T., Müssig, J., Curnow, O., Pang, S., Bickerton, S., & Staiger, M. P. (2012) · Journal of Materials Science · doi:10.1007/s10853-011-5774-3 · Cited by 451
Cellulose in NaOH–water based solvents: a review
Budtova, T., & Navard, P. (2016) · Cellulose · doi:10.1007/s10570-015-0779-8 · Cited by 392
The strength and stiffness of oriented wood and cellulose-fibre materials: A review
Jakob, M., Mahendran, A. R., Gindl-Altmutter, W., Bliem, P., Konnerth, J., Müller, U., & Veigel, S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100916 · Cited by 292
Ye, D., Lei, X., Li, T., Cheng, Q., Chang, C., Hu, L., & Zhang, L. (2019) · ACS Nano · doi:10.1021/acsnano.9b02081 · Cited by 276
Tang, X., Liu, G., Zhang, H., Gao, X., Li, M., & Zhang, S. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117591 · Cited by 34
Metadata
- Authors
- Nishino, T., & Arimoto, N.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2007-08-24
- Volume
- 8
- Issue
- 9
- Pages
- 2712-2716
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1999776481
- Cited by
- 241
- References
- 1
- FWCI
- 4.18
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.