The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Clay Nanopaper with Tough Cellulose Nanofiber Matrix for Fire Retardancy and Gas Barrier Functions
Abstract
Nacre-mimicking hybrids of high inorganic content (>50 wt %) tend to show low strain-to-failure. Therefore, we prepared clay nanopaper hybrid composite montmorillonite platelets in a continuous matrix of nanofibrillated cellulose (NFC) with the aim of harnessing the intrinsic toughness of fibrillar networks. Hydrocolloid mixtures were used in a filtration approach akin to paper processing. The resulting multilayered structure of the nanopaper was studied by FE-SEM, FTIR, and XRD. Uniaxial stress-strain curves measured in tension and thermal analysis were carried out by DMTA and TGA. In addition, fire retardance and oxygen permeability characteristics were measured. The continuous NFC matrix is a new concept and provides unusual ductility to the nanocomposite, allowing inorganic contents as high as 90% by weight. Clay nanopaper extends the property range of cellulose nanopaper and is of interest in self-extinguishing composites and in oxygen barrier layers.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Biological materials: Structure and mechanical properties
Meyers, M. A., Chen, P.-Y., Lin, A. Y.-M., & Seki, Y. (2008) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.05.002 · Cited by 2,573
Tough, Bio-Inspired Hybrid Materials
Munch, E., Launey, M. E., Alsem, D. H., Saiz, E., Tomsia, A. P., & Ritchie, R. O. (2008) · Science · doi:10.1126/science.1164865 · Cited by 1,822
Transparent and high gas barrier films of cellulose nanofibers prepared by TEMPO-mediated oxidation
Fukuzumi, H., Saito, T., Iwata, T., Kumamoto, Y., & Isogai, A. (2009) · Biomacromolecules · doi:10.1021/bm801065u · Cited by 1,271
Cited by
Lavoine, N., Desloges, I., Dufresne, A., & Bras, J. (2012) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2012.05.026 · Cited by 1,791
Nanocellulose: a new ageless bionanomaterial
Dufresne, A. (2013) · Materials Today · doi:10.1016/j.mattod.2013.06.004 · Cited by 1,685
Developing fibrillated cellulose as a sustainable technological material
Li, T., Chen, C., Brozena, A. H., Zhu, J. Y., Xu, L., Driemeier, C., Dai, J., Rojas, O. J., Isogai, A., Wågberg, L., et al. (2021) · Nature · doi:10.1038/s41586-020-03167-7 · Cited by 1,674
Wood-Derived Materials for Green Electronics, Biological Devices, and Energy Applications
Zhu, H., Luo, W., Ciesielski, P. N., Fang, Z., Zhu, J. Y., Henriksson, G., Himmel, M. E., & Hu, L. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00225 · Cited by 1,532
Moisture and Oxygen Barrier Properties of Cellulose Nanomaterial-Based Films
Wang, J., Gardner, D. J., Stark, N. M., Bousfield, D. W., Tajvidi, M., & Cai, Z. (2018) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.7b03523 · Cited by 675
Advanced Materials through Assembly of Nanocelluloses
Kontturi, E., Laaksonen, P., Linder, M. B., Nonappa, Gröschel, A. H., Rojas, O. J., & Ikkala, O. (2018) · Advanced Materials · doi:10.1002/adma.201703779 · Cited by 664
Self-citationNanocellulose properties and applications in colloids and interfaces
Salas, C., Nypelö, T., Rodriguez-Abreu, C., Carrillo, C., & Rojas, O. J. (2014) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2014.10.003 · Cited by 612
Understanding Nanocellulose–Water Interactions: Turning a Detriment into an Asset
Solhi, L., Guccini, V., Heise, K., Solala, I., Niinivaara, E., Xu, W., Mihhels, K., Kröger, M., Meng, Z., Wohlert, J., et al. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00611 · Cited by 506
Surface and Interface Engineering for Nanocellulosic Advanced Materials
Yang, X., Biswas, S. K., Han, J., Tanpichai, S., Li, M., Chen, C., Zhu, S., Das, A. K., & Yano, H. (2021) · Advanced Materials · doi:10.1002/adma.202002264 · Cited by 497
Graphene and graphene oxide and their uses in barrier polymers
Yoo, B. M., Shin, H. J., Yoon, H. W., & Park, H. B. (2014) · Journal of Applied Polymer Science · doi:10.1002/app.39628 · Cited by 495
Wood nanocelluloses: fundamentals and applications as new bio-based nanomaterials
Isogai, A. (2013) · Journal of Wood Science · doi:10.1007/s10086-013-1365-z · Cited by 443
Cellulose Nanomaterials—Binding Properties and Applications: A Review
Tayeb, A., Amini, E., Ghasemi, S., & Tajvidi, M. (2018) · Molecules · doi:10.3390/molecules23102684 · Cited by 433
Cellulose Nanoparticles as Modifiers for Rheology and Fluid Loss in Bentonite Water-based Fluids
Li, M.-C., Wu, Q., Song, K., Qing, Y., & Wu, Y. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00498 · Cited by 373
Cellulose Nanofiber Orientation in Nanopaper and Nanocomposites by Cold Drawing
Sehaqui, H., Ezekiel Mushi, N., Morimune, S., Salajkova, M., Nishino, T., & Berglund, L. A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am2016766 · Cited by 351
Self-citationWang, J., Cheng, Q., Lin, L., & Jiang, L. (2014) · ACS Nano · doi:10.1021/nn406428n · Cited by 325
Biodegradable transparent substrates for flexible organic-light-emitting diodes
Zhu, H., Xiao, Z., Liu, D., Li, Y., Weadock, N. J., Fang, Z., Huang, J., & Hu, L. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40492g · Cited by 323
Benítez, A. J., & Walther, A. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02006f · Cited by 310
Self-citationGas barrier properties of polymer/clay nanocomposites
Cui, Y., Kumar, S., Rao Kona, B., & van Houcke, D. (2015) · RSC Advances · doi:10.1039/c5ra10333a · Cited by 308
Ultrastrong and High Gas-Barrier Nanocellulose/Clay-Layered Composites
Wu, C.-N., Saito, T., Fujisawa, S., Fukuzumi, H., & Isogai, A. (2012) · Biomacromolecules · doi:10.1021/bm300465d · Cited by 303
Liu, H., Kuila, T., Kim, N. H., Ku, B.-C., & Lee, J. H. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta01228j · Cited by 295
Yao, H., Ge, J., Mao, L., Yan, Y., & Yu, S. (2014) · Advanced Materials · doi:10.1002/adma.201303470 · Cited by 292
Benítez, A. J., Torres-Rendon, J., Poutanen, M., & Walther, A. (2013) · Biomacromolecules · doi:10.1021/bm401451m · Cited by 287
Self-citationHarito, C., Bavykin, D. V., Yuliarto, B., Dipojono, H. K., & Walsh, F. C. (2019) · Nanoscale · doi:10.1039/c9nr00117d · Cited by 287
Xiong, R., Grant, A. M., Ma, R., Zhang, S., & Tsukruk, V. V. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.01.002 · Cited by 276
Gopakumar, D. A., Pai, A. R., Pottathara, Y. B., Pasquini, D., Carlos de Morais, L., Luke, M., Kalarikkal, N., Grohens, Y., & Thomas, S. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b04549 · Cited by 268
Aulin, C., Salazar-Alvarez, G., & Lindström, T. (2012) · Nanoscale · doi:10.1039/c2nr31726e · Cited by 260
Transparent nanopaper with tailored optical properties
Zhu, H., Parvinian, S., Preston, C., Vaaland, O., Ruan, Z., & Hu, L. (2013) · Nanoscale · doi:10.1039/c3nr00520h · Cited by 257
Metadata
- Authors
- Liu, A., Walther, A., Ikkala, O., Belova, L., & Berglund, L. A.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-02-03
- Volume
- 12
- Issue
- 3
- Pages
- 633-641
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2048252761
- Cited by
- 412
- References
- 3
- FWCI
- 10.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.