Fine Tuning Micellar Core-Forming Block of Poly(ethylene glycol)-block-poly(ε-caprolactone) Amphiphilic Copolymers Based on Chemical Modification for the Solubilization and Delivery of Doxorubicin
The DOI matches its Crossref record; 50 of the 50 references it cites were found in a registry or an index.
Abstract
This study aimed to optimize poly(ethylene glycol)-b-poly(ε-caprolactone) (PEG-b-PCL)-based amphiphilic block copolymers for achieving a better micellar drug delivery system (DDS) with improved solubilization and delivery of doxorubicin (DOX). First, the Flory-Huggins interaction parameters between DOX and the core-forming segments [i.e., poly(ε-caprolactone) (PCL) and poly[(ε-caprolactone-co-γ-(carbamic acid benzyl ester)-ε-caprolactone] (P(CL-co-CABCL))] was calculated to assess the drug-polymer compatibility. The results indicated a better compatibility between DOX and P(CL-co-CABCL) than that between DOX and PCL, motivating the synthesis of monomethoxy-poly(ethylene glycol)-b-poly[(ε-caprolactone-co-γ-(carbamic acid benzyl ester)-ε-caprolactone] (mPEG-b-P(CL-co-CABCL)) block copolymer. Second, two novel block copolymers of mPEG-b-P(CL-co-CABCL) with different compositions were prepared via ring-opening polymerization of CL and CABCL using mPEG as a macroinitiator and characterized by (1)H NMR, FT-IR, GPC, WAXD, and DSC techniques. It was found that the introduction of CABCL decreased the crystallinity of mPEG-b-PCL copolymer. Micellar formation of the copolymers in aqueous solution was investigated with fluorescence spectroscopy, DLS and TEM. mPEG-b-P(CL-co-CABCL) copolymers had a lower critical micelle concentration (CMC) than mPEG-b-PCL and subsequently led to an improved stability of prepared micelles. Furthermore, both higher loading capacity and slower in vitro release of DOX were observed for micelles of copolymers with increased content of CABCL, attributed to both improved drug-core compatibility and favorable amorphous core structure. Meanwhile, DOX-loaded micelles facilitated better uptake of DOX by HepG2 cells and were mainly retained in the cytosol, whereas free DOX accumulated more in the nuclei. However, possibly because of the slower intracellular release of DOX, DOX-loaded micelles were less potent in inhibiting cell proliferation than free DOX in vitro. Taken together, the introduction of CABCL in the core-forming block of mPEG-b-PCL resulted in micelles with superior properties, which hold great promise for drug delivery applications.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“They reported that the Flory-Huggins parameters could predict differences in drug solubilization and controlled release between these micelle systems.”
From Polymeric micelles for the delivery of poorly soluble drugs: From nanoformulation to clinical approval. (2020) · cites this paper as [197]
Citations
Cites
Block copolymer micelles for drug delivery: design, characterization and biological significance
Kataoka, K., Harada, A., & Nagasaki, Y. (2001) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(00)00124-1 · Cited by 3,506
Micellar Nanocarriers: Pharmaceutical Perspectives
Torchilin, V. P. (2006) · Pharmaceutical Research · doi:10.1007/s11095-006-9132-0 · Cited by 1,910
Block copolymer micelles: preparation, characterization and application in drug delivery
Gaucher, G., Dufresne, M.-H., Sant, V. P., Kang, N., Maysinger, D., & Leroux, J.-C. (2005) · Journal of Controlled Release · doi:10.1016/j.jconrel.2005.09.034 · Cited by 1,498
Physical stimuli-responsive polymeric micelles for anti-cancer drug delivery
Rapoport, N. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2007.05.009 · Cited by 1,002
Block copolymer micelles for delivery of gene and related compounds
Kakizawa, Y., & Kataoka, K. (2002) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(02)00017-0 · Cited by 738
Shuai, X., Ai, H., Nasongkla, N., Kim, S., & Gao, J. (2004) · Journal of Controlled Release · doi:10.1016/j.jconrel.2004.06.003 · Cited by 695
Bae, Y., & Kataoka, K. (2009) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2009.04.016 · Cited by 669
Kataoka, K., Matsumoto, T., Yokoyama, M., Okano, T., Sakurai, Y., Fukushima, S., Okamoto, K., & Kwon, G. S. (2000) · Journal of Controlled Release · doi:10.1016/s0168-3659(99)00133-9 · Cited by 613
Biodegradable polymeric micelles composed of doxorubicin conjugated PLGA–PEG block copolymer
Yoo, H. S., & Park, T. G. (2001) · Journal of Controlled Release · doi:10.1016/s0168-3659(00)00340-0 · Cited by 538
Tyrrell, Z. L., Shen, Y., & Radosz, M. (2010) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2010.06.003 · Cited by 481
Research works printed but not linked: 1
- He Y. Y., 2010, J. Mater. Sci.: Mater. Med., 21, 567
Cited by
Items 101–144 of 144
Wei, C., Wu, K., Li, J., Ma, W., Guo, J., Hu, J., & Wang, C. (2012) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201100607 · Cited by 10
Hayashida, O., Matsuo, T., Nakamura, K., & Kusano, S. (2016) · The Journal of Organic Chemistry · doi:10.1021/acs.joc.6b00558 · Cited by 10
Abbasi, S., Sato, Y., Kajimoto, K., & Harashima, H. (2020) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.0c00542 · Cited by 10
Peng, K., Wang, S., Hua, M., & Lee, R. (2013) · RSC Advances · doi:10.1039/c3ra42763c · Cited by 9
Ilhami, F. B., Erman, E., Rahmawati, A., Birhan, Y. S., Fitriana, F., & Tiwikrama, A. H. (2023) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2023.105078 · Cited by 9
Preparation and characterization of the ion-fixed mixed micelles with superior stability
Yang, L., Fu, Y., Guo, H., Zhang, L., Huang, L., & Yang, L. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.05.011 · Cited by 9
Synthesis of glycopoly(pseudo amino acid)s and their interaction with lectins
Lee, R., & Peng, K. (2012) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2012.06.003 · Cited by 9
Ghamkhari, A., Massoumi, B., & Agbolaghi, S. (2017) · Polymer International · doi:10.1002/pi.5504 · Cited by 8
Kang, M., Cho, M., Kim, S., & Youk, J. H. (2017) · Fibers and Polymers · doi:10.1007/s12221-017-7309-2 · Cited by 8
Latif, S., Rafiq, M., Tahir, T., Yar, M., & Ayub, K. (2025) · Inorganic Chemistry Communications · doi:10.1016/j.inoche.2025.115653 · Cited by 7
Photosensitive multifunctional poly(vinyl alcohol) micelles for enhanced antitumor effect
Yu, Q., Xie, A., Huang, F., Li, S., Xiao, Y., & Shen, Y. (2017) · Materials Science and Engineering C · doi:10.1016/j.msec.2017.03.086 · Cited by 7
Self-citationSun, C., Wang, J., Hu, J., Lü, W., Song, Z., & Zhang, Y. (2020) · Materials Chemistry Frontiers · doi:10.1039/c9qm00778d · Cited by 7
Self-citationZhang, Y., Liu, J., Fu, Y., Tan, K., Ye, Z., & Lang, M. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb00012e · Cited by 7
Self-citationLuo, Y., Zhang, J., Han, F., Xu, F., Chen, Y., & Liu, R. (2015) · Journal of Applied Polymer Science · doi:10.1002/app.41877 · Cited by 6
Lin, Y.-K., Wang, S., & Lee, R. (2020) · International Journal of Polymeric Materials · doi:10.1080/00914037.2020.1798434 · Cited by 6
Xu, J., Xu, F., & Luo, Y. (2015) · Journal of Bioactive and Compatible Polymers · doi:10.1177/0883911515578871 · Cited by 5
Sung, M., Shin, D. H., Lee, H., Jang, K. H., Shin, K., & Kim, J. W. (2021) · Journal of Molecular Liquids · doi:10.1016/j.molliq.2021.117741 · Cited by 5
Influence of Hydrophobic Chains in Nanocarriers on Antitumor Efficacy of Docetaxel Nanoparticles
Dong, Z., Shen, Y., Zhao, S., Wang, X., Han, M., Zhao, N., Ao, H., & Guo, Y. (2020) · Molecular Pharmaceutics · doi:10.1021/acs.molpharmaceut.9b01228 · Cited by 5
Atanasova, M., Grancharov, G., & Petrov, P. D. (2020) · Journal of Polymer Science · doi:10.1002/pol.20200706 · Cited by 5
Du, Z., Zhang, Y., & Lang, M. (2015) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-015-5499-y · Cited by 5
“The cytotoxicity of the copolymer micelles was evaluated by a popular 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, which was based on the reduction of a tetrazolium compound MTT to a colored formazan product [36, 37].”
BackgroundMethodSelf-citationFu, Y., Xia, X., Zhang, Y., Ye, J., & Lang, M. (2014) · Colloid & Polymer Science · doi:10.1007/s00396-014-3261-5 · Cited by 4
“8° were observed for the copolymer 4-arm PEG-b-P(CL-co-CABCL), which showed that the intensity was slighter because the CABCL disturbed the crystallinity [36].”
BackgroundSelf-citationChang, L., Wang, W., Huang, P., Lv, Z., Hu, F., Zhang, J., Kong, D., Deng, L., & Dong, A. (2013) · Journal of Biomaterials Science Polymer Edition · doi:10.1080/09205063.2013.808152 · Cited by 3
“Firstly, the introduction of cinnamoyloxy groups on PCL segment should enhance the drug loading content.[36] Secondly, the stability of NPs should be improved and premature drug release should be inhibited by crosslinking via UV irradiation at λ = 254 nm (shown in Scheme 1(A) and (B)).”
BackgroundMethodResultInfluentialKong, Z., Wu, W., Yan, J., Wu, B., Zhou, Y. J., Du, W., & Qi, Z. (2016) · Journal of Polymer Research · doi:10.1007/s10965-016-1122-2 · Cited by 3
Self-citationRazavilar, N., & Choi, P. (2016) · Computational Materials Science · doi:10.1016/j.commatsci.2016.03.014 · Cited by 3
Wang, C., Wu, T., Li, Y., Liu, J., Wang, Y., Wang, K., Li, Y., & Leng, X. (2025) · Polymers · doi:10.3390/polym17081030 · Cited by 2
“…10 − 1 to 10 × 10 − 4 mg/mL were recorded while keeping the pyrene concentration constant at 1.0 × 10 − 6 mol/L. Spectral intensity ratios (I 339 /I 384 ) were plotted against logarithmic polymer concentrations (lgC), with the CMC identified as the intersection point of the regression curves [41].”
InfluentialPeng, K., Wang, S., Hua, M., & Lee, R. (2012) · Journal of Polymer Research · doi:10.1007/s10965-012-0062-8 · Cited by 2
Huang, Y.-T., Peng, K., Chiu, F., & Lee, R. (2013) · Polymer Journal · doi:10.1038/pj.2012.233 · Cited by 2
Xu, F., Xu, J., & Luo, Y. (2016) · Journal of Biomaterials Applications · doi:10.1177/0885328216633891 · Cited by 2
“Amphiphilic block copolymer micelles have attracted extensive attention in the past decade due to their unique spherical core-shell structure and excellent physicochemical properties.(1,2) They have been widely used as drug controlled release carriers for solubilization of lipophilic or poorly soluble drug and gene th…”
BackgroundSun, H., Wang, S., Wang, Y., Lu, L., Su, F., & Li, S. (2025) · Polymers for Advanced Technologies · doi:10.1002/pat.70162 · Cited by 2
Park, J., & Paik, S. R. (2025) · ACS Materials Au · doi:10.1021/acsmaterialsau.5c00051 · Cited by 1
Idris, N. S., Naseer, M., Mulvey, J. T., Rizvi, A., Nguyen, N. A. T., & Patterson, J. P. (2026) · Macromolecules · doi:10.1021/acs.macromol.5c02845 · Cited by 1
Chemotherapeutic loading via tailoring of drug-carrier interactions in poly (sialic acid) micelles
Pawlish, G. J., Spivack, K., Gabriel, A., Huang, Z. J., & Comolli, N. K. (2018) · AIMS bioengineering · doi:10.3934/bioeng.2018.2.106 · Cited by 1
“While loading may be increased with longer chain lengths [12,13], a saturation point is ultimately reached due to enhanced crystallinity of the longer chain, a negative for drug loading [24].”
InfluentialSynthesis and Bioactivity Evaluation of Indole-Thiophene polymer with Molecular Docking Studies
Baseer, R. A., Abdrabou, A., Zarie, E. S., Azouz, R. A. M., & Abo‐Salem, H. M. (2020) · Egyptian Journal of Chemistry · doi:10.21608/ejchem.2020.36373.2751 · Cited by 1
“Meidong Lang's team[8] studied the optimization of poly (ethylene glycol)-b-poly(εcaprolactone) (PEG-b-PCL)-based amphiphilic block copolymers for achieving a better micellar drug delivery system (DDS) with improved solubilization and delivery of doxorubicin (DOX).”
BackgroundReductive responsive hyaluronic acid conjugated S-nitrothiol prodrugs as drug carriers
Lin, Y.-K., Wang, S., & Lee, R. (2021) · International Journal of Polymeric Materials · doi:10.1080/00914037.2021.1931207 · Cited by 1
Udin, S. M., Maarof, H., & Rahman, N. A. (2023) · ChemistrySelect · doi:10.1002/slct.202301022 · Cited by 1
Design of Macromolecular Anti-cancer Drug Delivery Systems using Molecular Dynamics Simulation
Razavilar, N. (2015) · ERA: Education and Research Archive (University of Alberta) · doi:10.7939/r33x83x7v · Cited by 1
Fang, J., Lin, Y., Wang, S., & Lee, R. (2019) · International Journal of Polymeric Materials · doi:10.1080/00914037.2018.1539987
Bioplastics Used for Controlled Drug Delivery
Rajakumari, R., Thomas, S., & Kalarikkal, N. (2021) · Elsevier eBooks · doi:10.1016/b978-0-12-820352-1.00133-4
Poly(caprolactone) in nanodrug delivery
Saravanakumar, G., Ramasundaram, S., Sobha, S., & Ramasubbu, A. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-95233-0.00015-7
Do, U. T., Song, M., Kim, J., Luu, Q. S., Nguyen, Q. T., Park, Y., Yang, S., Choi, J., Yun, S., Whiting, N., et al. (2024) · European Polymer Journal · doi:10.1016/j.eurpolymj.2024.113652
Gharehbaba, M. A., Soleimani, M., & Jafari, S. (2025) · Journal of Polymer Research · doi:10.1007/s10965-025-04714-4
“The logarithm of the micelle con - centration was plotted against the ratio of pyrene emission intensity at 335 nm and 333 nm (I 335 /I 333 ), from which the CMC values were determined [24 ]. plotting the chromatographic peak area (y-axis) versus the respective analyte concentration (x-axis) (Fig.”
Alnaeem, A. (2025) · Nottingham ePrints (University of Nottingham) · doi:10.17639/12094
Musbau, R. F., Musongong, J. A., Wu, Y., & Du, G. (2026) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2026.106962
Metadata
- Authors
- Yan, J., Ye, Z., Chen, M., Liu, Z., Xiao, Y., Zhang, Y., Zhou, Y., Tan, W., & Lang, M.
- Affiliations
- East China University of Science and Technology (CN)
- State Key Laboratory of Bioreactor Engineering, School of Bioengineering, East China University of Science and Technology, Shanghai, 200237, China
- Corresponding author
- Ye, Zhaoyang
- Lang, Meidong
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-06-06
- Volume
- 12
- Issue
- 7
- Pages
- 2562-2572
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W2320307336
- Cited by
- 143
- References
- 50
- Citations by year
- 2026: 2 · 2025: 5 · 2024: 6 · 2023: 3 · 2022: 6 · 2021: 7 · 2020: 14 · 2019: 6 · 2018: 6 · 2017: 11 · 2016: 13 · 2015: 17 · 2014: 14 · 2013: 20 · 2012: 12
- FWCI
- 6.15
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Biomacromolecules (publishedVersion)
- PubMed (publishedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Nanoparticle-Based Drug Delivery
- Physical Sciences › Chemistry › Organic Chemistry › Advanced Polymer Synthesis and Characterization
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Pharmaceutical Science › Advanced Drug Delivery Systems
- Keywords
- micellar drug delivery, doxorubicin, polycaprolactone, Flory-Huggins interaction parameter, drug-polymer compatibility, critical micelle concentration, micelle stability, drug loading capacity, controlled release, HepG2 cells, anticancer activity, ring-opening polymerization
- MeSH terms
- Cell Survival, Dose-Response Relationship, Drug, Doxorubicin, Humans, Lactones, Micelles, Particle Size, Polyethylene Glycols, Solubility, Structure-Activity Relationship, Surface Properties, Tissue Distribution, Tumor Cells, Cultured, Molecular Structure, Drug Delivery Systems
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.