The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Soybean-Oil-Based Waterborne Polyurethane Dispersions: Effects of Polyol Functionality and Hard Segment Content on Properties
Abstract
The environmentally friendly vegetable-oil-based waterborne polyurethane dispersions with very promising properties have been successfully synthesized without difficulty from a series of methoxylated soybean oil polyols (MSOLs) with different hydroxyl functionalities ranging from 2.4 to as high as 4.0. The resulting soybean-oil-based waterborne polyurethane (SPU) dispersions exhibit a uniform particle size, which increases from about 12 to 130 nm diameter with an increase in the OH functionality of the MSOL from 2.4 to 4.0 and decreases with increasing content of the hard segments. The structure and thermophysical and mechanical properties of the resulting SPU films, which contain 50-60 wt % MSOL as renewable resources, have been studied by Fourier transform infrared spectroscopy, differential scanning calorimetry, dynamic mechanical analysis, thermogravimetric analysis, transmission electron microscopy, and mechanical testing. The experimental results reveal that the functionality of the MSOLs and the hard segment content play a key role in controlling the structure and the thermophysical and mechanical properties of the SPU films. These novel films exhibit tensile stress-strain behavior ranging from elastomeric polymers to rigid plastics and possess Young's moduli ranging from 8 to 720 MPa, ultimate tensile strengths ranging from 4.2 to 21.5 MPa, and percent elongation at break values ranging from 16 to 280%. This work has addressed concerns regarding gelation and higher cross-linking caused by the high functionality of vegetable-oil-based polyols. This article reports novel environmentally friendly biobased SPU materials with promising applications as decorative and protective coatings.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Plant oil renewable resources as green alternatives in polymer science
Meier, M. A. R., Metzger, J. O., & Schubert, U. S. (2007) · Chemical Society Reviews · doi:10.1039/b703294c · Cited by 1,487
Polymers from Renewable Resources: A Perspective for a Special Issue of Polymer Reviews
Williams, C., & Hillmyer, M. (2008) · Polymer Reviews · doi:10.1080/15583720701834133 · Cited by 977
Fox, T. G., & Loshaek, S. (1955) · Journal of Polymer Science · doi:10.1002/pol.1955.120158006 · Cited by 816
New Syntheses with Oils and Fats as Renewable Raw Materials for the Chemical Industry
Biermann, U., Friedt, W., Lang, S., Lühs, W., Machmüller, G., Metzger, J. O., Rüsch gen. Klaas, M., Schäfer, H. J., & Schneider, M. P. (2000) · Angewandte Chemie International Edition · doi:10.1002/1521-3773(20000703)39:13<2206::aid-anie2206>3.0.co;2-p · Cited by 712
Development and application of triglyceride‐based polymers and composites
Khot, S. N., Lascala, J. J., Can, E., Morye, S. S., Williams, G. I., Palmese, G. R., Kusefoglu, S. H., & Wool, R. P. (2001) · Journal of Applied Polymer Science · doi:10.1002/app.1897 · Cited by 647
Szycher's Handbook of Polyurethanes
(1999) · CRC Press eBooks · doi:10.1201/9781482273984 · Cited by 505
Properties of polyether-polyurethane block copolymers: effects of hard segment length distribution
Miller, J. A., Lin, S. B., Hwang, K. K. S., Wu, K. S., Gibson, P. E., & Cooper, S. L. (1985) · Macromolecules · doi:10.1021/ma00143a005 · Cited by 374
Teo, L.-S., Chen, C.-Y., & Kuo, J.-F. (1997) · Macromolecules · doi:10.1021/ma961035f · Cited by 367
Structure and Properties of Polyurethanes Prepared from Triglyceride Polyols by Ozonolysis
Petrović, Z. S., Zhang, W., & Javni, I. (2005) · Biomacromolecules · doi:10.1021/bm049451s · Cited by 336
Noble, K.-L. (1997) · Progress in Organic Coatings · doi:10.1016/s0300-9440(97)00071-4 · Cited by 277
Cited by
Thermal stability and flame retardancy of polyurethanes
Chattopadhyay, D. K., & Webster, D. C. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2009.06.002 · Cited by 1,748
Vegetable oil-based polymeric materials: synthesis, properties, and applications
Xia, Y., & Larock, R. C. (2010) · Green Chemistry · doi:10.1039/c0gc00264j · Cited by 864
Self-citationProgress of Polymers from Renewable Resources: Furans, Vegetable Oils, and Polysaccharides
Gandini, A., Lacerda, T. M., Carvalho, A. J. F., & Trovatti, E. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00264 · Cited by 756
Vegetable-oil-based polymers as future polymeric biomaterials
Miao, S., Wang, P., Su, Z., & Zhang, S. (2014) · Acta Biomaterialia · doi:10.1016/j.actbio.2013.08.040 · Cited by 573
Renewable polymeric materials from vegetable oils: a perspective
Lligadas, G., Ronda, J. C., Galià, M., & Cádiz, V. (2013) · Materials Today · doi:10.1016/j.mattod.2013.08.016 · Cited by 559
From Vegetable Oils to Polyurethanes: Synthetic Routes to Polyols and Main Industrial Products
Desroches, M., Escouvois, M., Auvergne, R., Caillol, S., & Boutevin, B. (2012) · Polymer Reviews · doi:10.1080/15583724.2011.640443 · Cited by 520
Vegetable oil based eco-friendly coating materials: A review article
Alam, M., Akram, D., Sharmin, E., Zafar, F., & Ahmad, S. (2014) · Arabian Journal of Chemistry · doi:10.1016/j.arabjc.2013.12.023 · Cited by 458
Plant Oils as Platform Chemicals for Polyurethane Synthesis: Current State-of-the-Art
Lligadas, G., Ronda, J. C., Galià, M., & Cádiz, V. (2010) · Biomacromolecules · doi:10.1021/bm100839x · Cited by 436
Synthesis of biodegradable polymers from renewable resources
Tschan, M. J.-L., Brulé, E., Haquette, P., & Thomas, C. M. (2012) · Polym. Chem. · doi:10.1039/c2py00452f · Cited by 428
Recent Advances in Vegetable Oil‐Based Polyurethanes
Pfister, D. P., Xia, Y., & Larock, R. C. (2011) · ChemSusChem · doi:10.1002/cssc.201000378 · Cited by 363
Self-citationBio-based polyurethane: An efficient and environment friendly coating systems: A review
Noreen, A., Zia, K. M., Zuber, M., Tabasum, S., & Zahoor, A. F. (2016) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2015.11.018 · Cited by 331
Lu, Y., & Larock, R. C. (2009) · ChemSusChem · doi:10.1002/cssc.200800241 · Cited by 324
Self-citationBio-Based Polymers with Potential for Biodegradability
Garrison, T., Murawski, A., & Quirino, R. (2016) · Polymers · doi:10.3390/polym8070262 · Cited by 319
Zhang, C., Liang, H., Liang, D., Lin, Z., Chen, Q., Feng, P., & Wang, Q. (2021) · Angewandte Chemie International Edition · doi:10.1002/anie.202014299 · Cited by 319
Recent advances in vegetable oils based environment friendly coatings: A review
Sharmin, E., Zafar, F., Akram, D., Alam, M., & Ahmad, S. (2015) · Industrial Crops and Products · doi:10.1016/j.indcrop.2015.06.022 · Cited by 291
Zhou, X., Li, Y., Fang, C., Li, S., Cheng, Y., Lei, W., & Meng, X. (2015) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2015.03.002 · Cited by 273
Lee, S., Lee, K., Kim, Y.-W., & Shin, J. (2015) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.5b00580 · Cited by 110
Metadata
- Authors
- Lu, Y., & Larock, R. C.
- Venue
- Biomacromolecules
- Publisher
- American Chemical Society (ACS)
- Published
- 2008-10-21
- Volume
- 9
- Issue
- 11
- Pages
- 3332-3340
- ISSN
- 1525-7797 (ISSN-L)
- 1526-4602
- OpenAlex
- W1968229643
- Cited by
- 377
- References
- 37
- FWCI
- 10.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.