The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Powder Synthesis and Characterization of Amorphous Carbon Nitride
Abstract
Carbon nitride powder has been prepared by solid-state reaction between cyanuric chloride or its fluoro analogue and lithium nitride. The determined, by elemental analysis, atomic N/C ratio (1.33) in the synthesized material is entirely consistent with the C 3 N 4 stoichiometry. Combined material characterization data, obtained by Fourier transform infrared, Raman, UV−visible, ( 13 C) magic-angle spinning NMR, X-ray photoelectron spectroscopy, thermal gravimetric analysis/differential thermal analysis, and pyrolysis−electron ionization mass spectrometry methods, provide substantial evidence for graphite-like sp 2 -bonded structure composed of building blocks of s-triazine rings bridged by the 3-fold coordinated nitrogen atoms in the bulk carbon nitride. As indicated by X-ray and scanning electron microscopy analytical data, the material is amorphous and changes from turbostratic to more ordered layered graphitic morphology under high pressures. The availability of stoichiometric carbon nitride a -C 3 N 4 in gram quantities, made possible by a developed low-cost synthetic method, facilitates the extensive studies of bulk processing and electromechanical properties, and high-pressure/high-temperature transformations of this material into superhard crystalline polymorphic phases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Prediction of New Low Compressibility Solids
Liu, A. Y., & Cohen, M. L. (1989) · Science · doi:10.1126/science.245.4920.841 · Cited by 2,681
High Resolution XPS of Organic Polymers
Beamson, G., & Briggs, D. (1992) · Analytica Chimica Acta · Cited by 1,725
Calculation of bulk moduli of diamond and zinc-blende solids
Cohen, M. L. (1985) · Physical Review B · doi:10.1103/physrevb.32.7988 · Cited by 1,139
Experimental Realization of the Covalent Solid Carbon Nitride
Niu, C., Lu, Y. Z., & Lieber, C. M. (1993) · Science · doi:10.1126/science.261.5119.334 · Cited by 896
A Benzene-Thermal Synthetic Route to Nanocrystalline GaN
Xie, Y., Qian, Y., Wang, W., Zhang, S., & Zhang, Y. (1996) · Science · doi:10.1126/science.272.5270.1926 · Cited by 432
High-Pressure Synthesis of sp 2 -Bonded Carbon Nitrides
Nesting, D. C., & Badding, J. V. (1996) · Chemistry of Materials · doi:10.1021/cm9601289 · Cited by 85
A New Development in Covalently Bonded Carbon Nitride and Related Materials
Wang, E. (1999) · Advanced Materials · Cited by 67
Cited by
Ong, W.-J., Tan, L.-L., Ng, Y. H., Yong, S.-T., & Chai, S.-P. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00075 · Cited by 7,147
Metal-free efficient photocatalyst for stable visible water splitting via a two-electron pathway
Liu, J., Liu, Y., Liu, N., Han, Y., Zhang, X., Huang, H., Lifshitz, Y., Lee, S.-T., Zhong, J., & Kang, Z. (2015) · Science · doi:10.1126/science.aaa3145 · Cited by 4,468
Wang, Y., Wang, X., & Antonietti, M. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201101182 · Cited by 3,364
Metal-Free Catalysts for Oxygen Reduction Reaction
Dai, L., Xue, Y., Qu, L., Choi, H.-J., & Baek, J.-B. (2015) · Chemical Reviews · doi:10.1021/cr5003563 · Cited by 2,380
Zheng, Y., Liu, J., Liang, J., Jaroniec, M., & Qiao, S. Z. (2012) · Energy & Environmental Science · doi:10.1039/c2ee03479d · Cited by 1,741
Metadata
- Authors
- Khabashesku, V. N., Zimmerman, J. L., & Margrave, J. L.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2000-10-07
- Volume
- 12
- Issue
- 11
- Pages
- 3264-3270
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W4249534044
- Cited by
- 623
- References
- 7
- FWCI
- 4.53
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.