The DOI matches its Crossref record; 34 of the 34 references it cites were found in a registry or an index.
Bridged Polysilsesquioxanes. Molecular-Engineered Hybrid Organic−Inorganic Materials
Abstract
The class of hybrid organic−inorganic materials called bridged polysilsesquioxanes are used for everything from surface modifiers and coatings to catalysts and membrane materials. This paper examines how bridged polysilsesquioxanes are prepared, processed, characterized, and used. In particular, it describes how attaching several “inorganic” cross-linking trialkoxysilanes on organic bridging groups permits facile formation of network polymers and gels with high levels of chemical functionality. There are a number of synthetic entries into bridged polysilsesquioxane monomers that have allowed a multitude of different bridging groups to be integrated into xerogels (dry gels) or aerogels (supercritically dried “air gels”). Much of the research to date has been successfully focused on engineering of the size of pores through the choice of the bridging groups. For example, materials with some of the highest known surface areas in porous materials have been prepared, and parameters allowing control of the pore size distributions are well understood. More recently, however, the focus has shifted to building functionality into the bridging groups to make materials with controlled porosity that are capable of selective adsorption or catalysis or electronic and optic effects. This is the area where the full potential of bridged polysilsesquioxanes as molecular-engineered materials is being explored.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Periodic mesoporous organosilicas with organic groups inside the channel walls
Asefa, T., MacLachlan, M. J., Coombs, N., & Ozin, G. A. (1999) · Nature · doi:10.1038/47229 · Cited by 1,730
Inagaki, S., Guan, S., Fukushima, Y., Ohsuna, T., & Terasaki, O. (1999) · Journal of the American Chemical Society · doi:10.1021/ja9916658 · Cited by 1,677
Functionalized Monolayers on Ordered Mesoporous Supports
Feng, X., Fryxell, G. E., Wang, L.-Q., Kim, A. Y., Liu, J., & Kemner, K. M. (1997) · Science · doi:10.1126/science.276.5314.923 · Cited by 1,562
Mesoporous Sieves with Unified Hybrid Inorganic/Organic Frameworks
Melde, B. J., Holland, B. T., Blanford, C. F., & Stein, A. (1999) · Chemistry of Materials · doi:10.1021/cm9903935 · Cited by 1,271
Hybrid organic–inorganic materials: a land of multidisciplinarity
Judeinstein, P., & Sanchez, C. (1996) · J. Mater. Chem. · doi:10.1039/jm9960600511 · Cited by 1,168
Bridged Polysilsesquioxanes. Highly Porous Hybrid Organic-Inorganic Materials
Loy, D. A., & Shea, K. J. (1995) · Chemical Reviews · doi:10.1021/cr00037a013 · Cited by 994
Self-citationBarton, T. J., Bull, L. M., Klemperer, W. G., Loy, D. A., McEnaney, B., Misono, M., Monson, P. A., Pez, G., Scherer, G. W., Vartuli, J. C., et al. (1999) · Chemistry of Materials · doi:10.1021/cm9805929 · Cited by 764
Self-citationMolecular imprinting of bulk, microporous silica
Katz, A., & Davis, M. E. (2000) · Nature · doi:10.1038/35002032 · Cited by 519
Arylsilsesquioxane gels and related materials. New hybrids of organic and inorganic networks
Shea, K. J., Loy, D. A., & Webster, O. (1992) · Journal of the American Chemical Society · doi:10.1021/ja00043a014 · Cited by 473
Self-citationLu, Y., Fan, H., Doke, N., Loy, D. A., Assink, R. A., LaVan, D. A., & Brinker, C. J. (2000) · Journal of the American Chemical Society · doi:10.1021/ja9935862 · Cited by 470
Self-citation
Cited by
Lanthanide-Based Luminescent Hybrid Materials
Binnemans, K. (2009) · Chemical Reviews · doi:10.1021/cr8003983 · Cited by 3,349
Silica‐Based Mesoporous Organic–Inorganic Hybrid Materials
Hoffmann, F., Cornelius, M., Morell, J., & Fröba, M. (2006) · Angewandte Chemie International Edition · doi:10.1002/anie.200503075 · Cited by 3,089
Structural engineering of polyurethane coatings for high performance applications
Chattopadhyay, D. K., & Raju, K. V. S. N. (2007) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2006.05.003 · Cited by 1,836
Applications of advanced hybrid organic–inorganic nanomaterials: from laboratory to market
Sanchez, C., Belleville, P., Popall, M., & Nicole, L. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00136h · Cited by 1,462
Design and Preparation of Organic−Inorganic Hybrid Catalysts
Wight, A. P., & Davis, M. E. (2002) · Chemical Reviews · doi:10.1021/cr010334m · Cited by 1,265
Low Dielectric Constant Materials
Volksen, W., Miller, R. D., & Dubois, G. (2010) · Chemical Reviews · doi:10.1021/cr9002819 · Cited by 964
Croissant, J. G., Fatieiev, Y., & Khashab, N. M. (2017) · Advanced Materials · doi:10.1002/adma.201604634 · Cited by 782
Functional Materials: From Hard to Soft Porous Frameworks
Thomas, A. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000167 · Cited by 780
An Overview on Silica Aerogels Synthesis and Different Mechanical Reinforcing Strategies
Maleki, H., Durães, L., & Portugal, A. (2014) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2013.10.017 · Cited by 740
Croissant, J. G., Fatieiev, Y., Almalik, A., & Khashab, N. M. (2018) · Advanced Healthcare Materials · doi:10.1002/adhm.201700831 · Cited by 594
Tailoring Mechanical Properties of Aerogels for Aerospace Applications
Randall, J. P., Meador, M. A. B., & Jana, S. C. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200007n · Cited by 579
Mizoshita, N., Tani, T., & Inagaki, S. (2011) · Chem. Soc. Rev. · doi:10.1039/c0cs00010h · Cited by 550
Mechanical properties of hybrid organic–inorganic materials
Mammeri, F., Bourhis, E. L., Rozes, L., & Sanchez, C. (2005) · Journal of Materials Chemistry · doi:10.1039/b507309j · Cited by 512
Nonporous silica nanoparticles for nanomedicine application
Tang, L., & Cheng, J. (2013) · Nano Today · doi:10.1016/j.nantod.2013.04.007 · Cited by 488
History of Organic–Inorganic Hybrid Materials: Prehistory, Art, Science, and Advanced Applications
Faustini, M., Nicole, L., Ruiz‐Hitzky, E., & Sanchez, C. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201704158 · Cited by 400
Polyhedral Oligomeric Silsesquioxane (POSS)-Containing Polymer Nanocomposites
Ayandele, E., Sarkar, B., & Alexandridis, P. (2012) · Nanomaterials · doi:10.3390/nano2040445 · Cited by 396
Polyhedral oligomeric silsesquioxanes (POSS) thermal degradation
Fina, A., Tabuani, D., Carniato, F., Frache, A., Boccaleri, E., & Camino, G. (2006) · Thermochimica Acta · doi:10.1016/j.tca.2005.10.006 · Cited by 389
Synthesis and biomedical applications of aerogels: Possibilities and challenges
Maleki, H., Durães, L., García-González, C. A., del Gaudio, P., Portugal, A., & Mahmoudi, M. (2016) · Advances in Colloid and Interface Science · doi:10.1016/j.cis.2016.05.011 · Cited by 386
Polyhedral Oligomeric Silsesquioxanes (POSS)-Containing Nanohybrid Polymers
Pielichowski, K., Njuguna, J., Janowski, B., & Pielichowski, J. (2006) · Advances in Polymer Science · doi:10.1007/12_077 · Cited by 372
Mesoporöse organisch‐anorganische Hybridmaterialien auf Silicabasis
Hoffmann, F., Cornelius, M., Morell, J., & Fröba, M. (2006) · Angewandte Chemie · doi:10.1002/ange.200503075 · Cited by 288
Challenges and advances in the chemistry of periodic mesoporous organosilicas (PMOs)
Hunks, W. J., & Ozin, G. A. (2005) · Journal of Materials Chemistry · doi:10.1039/b504511h · Cited by 267
Silica Centered Aerogels as Advanced Functional Material and Their Applications: A Review
Ahmad, S., Ahmad, S., & Sheikh, J. N. (2023) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2023.122322 · Cited by 97
Metadata
- Authors
- Shea, K. J., & Loy, D. A.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2001-09-27
- Volume
- 13
- Issue
- 10
- Pages
- 3306-3319
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2008192721
- Cited by
- 552
- References
- 34
- FWCI
- 14.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.