The DOI matches its Crossref record; 81 of the 81 references it cites were found in a registry or an index.
Mechanical properties of hybrid organic–inorganic materials
Abstract
Homogeneously dispersed organic–inorganic hybrid nanocomposites can be obtained by increasing the interfacial interactions between both components via the formation of hydrogen bonds or covalent bonds, by mixing various polymers or via the adequate choice of the inorganic precursors. The mechanical response of these advanced functional materials is an issue of paramount importance when industrial applications are targeted. Large progress in the understanding of the mechanical properties of O–I hybrids has been gained by testing these materials under different conditions (static and dynamic, low and large deformations up to fracture) and using specific techniques developed for the mechanical characterization of conventional materials such as polymers, glasses or ceramics. However, the mechanical properties of hybrid O–I materials are dependent on their micro- and nanostructures and on the nature and extent of the O–I interfaces. Consequently, predictable mechanical properties for hybrids still represent a major challenge for hybrid materials science. Industrial attraction for hybrid materials has been emphasized by the development of new functional coatings. An important issue is the interface between the film and the substrate since strong adhesion can be tailored and ensures that delamination of the film will be limited.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
Reuss, A. (1929) · ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik · doi:10.1002/zamm.19290090104 · Cited by 6,338
(1990) · Elsevier eBooks · doi:10.1016/c2009-0-22386-5 · Cited by 3,192
Sol-gel chemistry of transition metal oxides
Livage, J., Henry, M., & Sanchez, C. (1988) · Progress in Solid State Chemistry · doi:10.1016/0079-6786(88)90005-2 · Cited by 2,323
Self-citationSoler-Illia, G. J. D. A. A., Sanchez, C., Lebeau, B., & Patarin, J. (2002) · Chemical Reviews · doi:10.1021/cr0200062 · Cited by 1,958
Self-citationBiomimetism and bioinspiration as tools for the design of innovative materials and systems
Sanchez, C., Arribart, H., & Giraud Guille, M. M. (2005) · Nature Materials · doi:10.1038/nmat1339 · Cited by 1,449
Self-citationHybrid Nanocomposite Materials—between inorganic glasses and organic polymers
Novak, B. M. (1993) · Advanced Materials · doi:10.1002/adma.19930050603 · Cited by 1,445
Designed Hybrid Organic−Inorganic Nanocomposites from Functional Nanobuilding Blocks
Sanchez, C., Soler-Illia, G. J. D. A. A., Ribot, F., Lalot, T., Mayer, C. R., & Cabuil, V. (2001) · Chemistry of Materials · doi:10.1021/cm011061e · Cited by 1,240
Self-citationHybrid organic–inorganic materials: a land of multidisciplinarity
Judeinstein, P., & Sanchez, C. (1996) · J. Mater. Chem. · doi:10.1039/jm9960600511 · Cited by 1,168
Concepts for the incorporation of inorganic building blocks into organic polymers on a nanoscale
Kickelbick, G. (2003) · Progress in Polymer Science · doi:10.1016/s0079-6700(02)00019-9 · Cited by 1,159
Cited by
Polymer/Silica Nanocomposites: Preparation, Characterization, Properties, and Applications
Zou, H., Wu, S., & Shen, J. (2008) · Chemical Reviews · doi:10.1021/cr068035q · Cited by 2,121
Low Dielectric Constant Materials
Volksen, W., Miller, R. D., & Dubois, G. (2010) · Chemical Reviews · doi:10.1021/cr9002819 · Cited by 964
Sol–gel silica-based biomaterials and bone tissue regeneration
Arcos, D., & Vallet-Regí, M. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.012 · Cited by 579
Wang, J.-Y., Yang, S.-Y., Huang, Y.-L., Tien, H.-W., Chin, W.-K., & Ma, C.-C. M. (2011) · Journal of Materials Chemistry · doi:10.1039/c1jm11766a · Cited by 288
Sol–gel derived organic–inorganic hybrid materials: synthesis, characterizations and applications
Pandey, S., & Mishra, S. B. (2011) · Journal of Sol-Gel Science and Technology · doi:10.1007/s10971-011-2465-0 · Cited by 277
Metadata
- Authors
- Mammeri, F., Bourhis, E. L., Rozes, L., & Sanchez, C.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2005
- Volume
- 15
- Issue
- 35-36
- Pages
- 3787
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1985691624
- Cited by
- 512
- References
- 81
- FWCI
- 17.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mechanical properties of hybrid organic–inorganic materials. https://app.cochat.ai/papers/10.1039/b507309j
- The paper
- Mammeri, F., Bourhis, E. L., Rozes, L., & Sanchez, C. (2005). Mechanical properties of hybrid organic–inorganic materials. Journal of Materials Chemistry. https://doi.org/10.1039/b507309j
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
