The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
A Detailed Study of Thermal, Hydrothermal, and Mechanical Stabilities of a Wide Range of Surfactant Assembled Mesoporous Silicas
Abstract
The thermal, hydrothermal, and mechanical stabilities of a wide range of ordered mesoporous materials, in particular, the molecular sieves MCM-41, MCM-48, HMS, FSM-16, KIT-1, PCH, and SBA-15, have been studied in detail using X-ray diffraction (XRD) and nitrogen sorption. The thermal stability was found to be strongly related to the wall thickness and the silica precursor used during synthesis, and the following stability trend was observed: MCM-41 (fumed silica), MCM-48 (fumed silica), KIT-1 (colloid silica) > SBA-15 (TEOS) > FSM-16 (layered silicate), PCH (layered silicate) > MCM-41 (TEOS), MCM-48 (TEOS), HMS (TEOS). The hydrothermal stability is influenced by the wall thickness and the polymerization degree and decreases according to the following trend: KIT-1 > SBA-15 > MCM-48 (fumed silica and TEOS), PCH > FSM-16, MCM-41 (fumed silica and TEOS), HMS. The mechanical stability is little influenced by the nature of the mesoporous molecular sieves. All materials collapsed at a maximum pelletizing pressure of 450 MPa.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Characterization of the porous structure of sba-15
Kruk, M., Jaroniec, M., Ko, C. H., & Ryoo, R. (2000) · Chemistry of Materials · doi:10.1021/cm000164e · Cited by 1,409
Cited by
On the controllable soft-templating approach to mesoporous silicates
Wan, Y., & Zhao (2007) · Chemical Reviews · doi:10.1021/cr068020s · Cited by 2,371
Ordered mesoporous materials in catalysis
Taguchi, A., & Schüth, F. (2005) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2004.06.030 · Cited by 2,119
Bioinspired engineering of honeycomb structure – Using nature to inspire human innovation
Zhang, Q., Yang, X., Li, P., Huang, G., Feng, S., Shen, C., Han, B., Zhang, X., Jin, F., Xu, F., et al. (2015) · Progress in Materials Science · doi:10.1016/j.pmatsci.2015.05.001 · Cited by 836
Harnessing Filler Materials for Enhancing Biogas Separation Membranes
Chuah, C. Y., Goh, K., Yang, Y., Gong, H., Li, W., Karahan, H. E., Guiver, M. D., Wang, R., & Bae, T.-H. (2018) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00091 · Cited by 339
Recent Advances and Future Aspects in the Selective Isomerization of High n‐Alkanes
Akhmedov, V. M., & Al‐Khowaiter, S. H. (2007) · Catalysis Reviews · doi:10.1080/01614940601128427 · Cited by 269
Mellaerts, R., Jammaer, J. A. G., Van Speybroeck, M., Chen, H., Humbeeck, J. V., Augustijns, P., Van den Mooter, G., & Martens, J. A. (2008) · Langmuir · doi:10.1021/la801161g · Cited by 259
Metadata
- Authors
- Cassiers, K., Linssen, T., Mathieu, M., Benjelloun, M., Schrijnemakers, K., Van Der Voort, P., Cool, P., & Vansant, E. F.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2002-04-09
- Volume
- 14
- Issue
- 5
- Pages
- 2317-2324
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W1986733551
- Cited by
- 355
- References
- 2
- FWCI
- 10.76
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
