The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
New Polylactide/Layered Silicate Nanocomposites. 3. High-Performance Biodegradable Materials
Abstract
Our ongoing research on the preparation, characterization, materials properties, and biodegradability of polylactide (PLA)/organically modified layered silicate (OMLS) nanocomposites has yielded results for PLA/organically modified synthetic fluorine mica (OMSFM) nanocomposites. Synthetic fluorine mica (SFM), modified with N -(coco alkyl)- N, N -[bis(2-hydroxyethyl)- N -methylammonium cation, was used as an OMLS for the nanocomposites preparation. The internal structure of the nanocomposites in the nanometer range was established using wide-angle X-ray diffraction (WAXD) analyses and transmission electron micrographic (TEM) observations. All nanocomposites exhibited remarkable improvement of various materials properties with simultaneous improvement in biodegradability than that of neat PLA. This is the first report that deals with the ultimate degradability of PLA and corresponding nanocomposites under compost.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Alexandre, M., & Dubois, P. (2000) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(00)00012-7 · Cited by 6,377
Polymer Layered Silicate Nanocomposites
Giannelis, E. P. (1996) · Advanced Materials · doi:10.1002/adma.19960080104 · Cited by 3,479
Polymer-layered silicate nanocomposites: an overview
LeBaron, P. (1999) · Applied Clay Science · doi:10.1016/s0169-1317(99)00017-4 · Cited by 2,504
Mechanical properties of nylon 6-clay hybrid
Kojima, Y., Usuki, A., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1185 · Cited by 2,442
Synthesis of nylon 6-clay hybrid
Usuki, A., Kojima, Y., Kawasumi, M., Okada, A., Fukushima, Y., Kurauchi, T., & Kamigaito, O. (1993) · Journal of Materials Research · doi:10.1557/jmr.1993.1179 · Cited by 2,203
Fischer, E. W., Sterzel, H. J., & Wegner, G. (1973) · Kolloid-Zeitschrift und Zeitschrift für Polymere · doi:10.1007/bf01498927 · Cited by 1,704
Poly(lactic acid): plasticization and properties of biodegradable multiphase systems
Martin, O., & Avérous, L. (2001) · Polymer · doi:10.1016/s0032-3861(01)00086-6 · Cited by 1,562
Large-scale production, properties and commercial applications of polylactic acid polymers
Lunt, J. (1998) · Polymer Degradation and Stability · doi:10.1016/s0141-3910(97)00148-1 · Cited by 1,366
Polymer–Clay Nanocomposites: Synthesis and Properties
Qutubuddin, S., & Fu, X. (2001) · Nano-Surface Chemistry · doi:10.1201/9780203908488.ch17 · Cited by 1,320
Polymer-Silicate Nanocomposites: Model Systems for Confined Polymers and Polymer Brushes
Giannelis, E. P., Krishnamoorti, R., & Manias, E. (1999) · Advances in Polymer Science · doi:10.1007/3-540-69711-x_3 · Cited by 1,129
Cited by
Polymer/layered silicate nanocomposites: a review from preparation to processing
Sinha Ray, S., & Okamoto, M. (2003) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2003.08.002 · Cited by 6,816
Self-citationAn Overview of Polylactides as Packaging Materials
Auras, R., Harte, B., & Selke, S. (2004) · Macromolecular Bioscience · doi:10.1002/mabi.200400043 · Cited by 3,454
Farah, S., Anderson, D. G., & Langer, R. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.06.012 · Cited by 3,443
Processing technologies for poly(lactic acid)
Lim, L.-T., Auras, R., & Rubino, M. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.05.004 · Cited by 2,766
A review on polymer–layered silicate nanocomposites
Pavlidou, S., & Papaspyrides, C. D. (2008) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.07.008 · Cited by 2,526
SINHARAY, S., & BOUSMINA, M. (2005) · Progress in Materials Science · doi:10.1016/j.pmatsci.2005.05.002 · Cited by 1,611
Self-citationNanocomposites: synthesis, structure, properties and new application opportunities
Camargo, P. H. C., Satyanarayana, K. G., & Wypych, F. (2009) · Materials Research · doi:10.1590/s1516-14392009000100002 · Cited by 1,350
Potential perspectives of bio-nanocomposites for food packaging applications
Sorrentino, A., Gorrasi, G., & Vittoria, V. (2007) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2006.09.004 · Cited by 1,112
Nano-biocomposites: Biodegradable polyester/nanoclay systems
BORDES, P., POLLET, E., & AVEROUS, L. (2009) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2008.10.002 · Cited by 1,033
PLA composites: From production to properties
Murariu, M., & Dubois, P. (2016) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2016.04.003 · Cited by 1,005
Nagarajan, V., Mohanty, A. K., & Misra, M. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00321 · Cited by 926
Wu, F., Misra, M., & Mohanty, A. K. (2021) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2021.101395 · Cited by 909
Polymer Nanocomposites—A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers
Bhattacharya, M. (2016) · Materials · doi:10.3390/ma9040262 · Cited by 747
An overview on the degradability of polymer nanocomposites
Pandey, J. K., Raghunatha Reddy, K., Pratheep Kumar, A., & Singh, R. P. (2005) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2004.09.013 · Cited by 584
Improving mechanical performance of injection molded PLA by controlling crystallinity
Harris, A. M., & Lee, E. C. (2008) · Journal of Applied Polymer Science · doi:10.1002/app.27261 · Cited by 545
Recent Advances in Biopolymers and Biopolymer-Based Nanocomposites for Food Packaging Materials
Tang, X. Z., Kumar, P., Alavi, S., & Sandeep, K. P. (2012) · Critical Reviews in Food Science and Nutrition · doi:10.1080/10408398.2010.500508 · Cited by 477
Ray, S. S., & Okamoto, M. (2003) · Macromolecular Rapid Communications · doi:10.1002/marc.200300008 · Cited by 454
Self-citationA critical appraisal of polymer–clay nanocomposites
Chen, B., Evans, J. R. G., Greenwell, H. C., Boulet, P., Coveney, P. V., Bowden, A. A., & Whiting, A. (2008) · Chem. Soc. Rev. · doi:10.1039/b702653f · Cited by 416
Jiang, L., Zhang, J., & Wolcott, M. P. (2007) · Polymer · doi:10.1016/j.polymer.2007.11.001 · Cited by 396
Biodegradation of poly(lactic acid) and its nanocomposites
Fukushima, K., Abbate, C., Tabuani, D., Gennari, M., & Camino, G. (2009) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2009.07.001 · Cited by 368
New Polylactide/Layered Silicate Nanocomposites, 6
Sinha Ray, S., & Okamoto, M. (2003) · Macromolecular Materials and Engineering · doi:10.1002/mame.200300156 · Cited by 333
Self-citationKim, I., & Jeong, Y. G. (2010) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.21956 · Cited by 331
Thermoplastic starch–clay nanocomposites and their characteristics
Chen, B., & Evans, J. R. G. (2005) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2005.06.020 · Cited by 318
New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties
Sinha Ray, S., Yamada, K., Okamoto, M., Fujimoto, Y., Ogami, A., & Ueda, K. (2003) · Polymer · doi:10.1016/j.polymer.2003.08.021 · Cited by 317
Self-citationControl of thermal degradation of polylactide (PLA)-clay nanocomposites using chain extenders
Najafi, N., Heuzey, M. C., Carreau, P. J., & Wood-Adams, P. M. (2012) · Polymer Degradation and Stability · doi:10.1016/j.polymdegradstab.2012.01.016 · Cited by 315
Dispersion and characteristics of surfactant modified cellulose whiskers nanocomposites
Bondeson, D., & Oksman, K. (2007) · Composite Interfaces · doi:10.1163/156855407782106519 · Cited by 294
Functional nanocomposites and their potential applications: A review
Hassan, T., Salam, A., Khan, A., Khan, S. U., Khanzada, H., Wasim, M., Khan, M. Q., & Kim, I. S. (2021) · Journal of Polymer Research · doi:10.1007/s10965-021-02408-1 · Cited by 289
Nanotechnology and its applications in lignocellulosic composites, a mini review
Kamel, S. (2007) · Express Polymer Letters · doi:10.3144/expresspolymlett.2007.78 · Cited by 271
Melt rheology of polylactide/poly(butylene adipate-co-terephthalate) blends
Gu, S.-Y., Zhang, K., Ren, J., & Zhan, H. (2008) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2008.01.017 · Cited by 269
Influence of montmorillonite layered silicate on plasticized poly(l-lactide) blown films
Thellen, C., Orroth, C., Froio, D., Ziegler, D., Lucciarini, J., Farrell, R., D'Souza, N. A., & Ratto, J. A. (2005) · Polymer · doi:10.1016/j.polymer.2005.09.057 · Cited by 252
Zhao, X., Liu, J., Li, J., Liang, X., Zhou, W., & Peng, S. (2022) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2022.07.091 · Cited by 249
Toughening of polylactic acid: an overview of research progress
Krishnan, S., Pandey, P., Mohanty, S., & Nayak, S. K. (2016) · Polymer-Plastics Technology and Engineering · doi:10.1080/03602559.2015.1098698 · Cited by 147
Pluta, M., Paul, M., Alexandre, M., & Dubois, P. (2006) · Journal of Polymer Science Part B: Polymer Physics · doi:10.1002/polb.20694 · Cited by 127
Lewitus, D., McCarthy, S., Ophir, A., & Kenig, S. (2006) · Journal of Polymers and the Environment · doi:10.1007/s10924-006-0007-6 · Cited by 110
CNT Induced β-Phase in Polylactide: Unique Crystallization, Biodegradation, and Biocompatibility
Singh, N. K., Singh, S. K., Dash, D., Gonugunta, P., Misra, M., & Maiti, P. (2013) · The Journal of Physical Chemistry C · doi:10.1021/jp4009042 · Cited by 68
Tanoue, S., Hasook, A., Iemoto, Y., & Unryu, T. (2006) · Polymer Composites · doi:10.1002/pc.20174 · Cited by 48
Jullin, A., Sudre, G., Hascoët, N., Chinesta, F., & Espuche, E. (2025) · Polymer Testing · doi:10.1016/j.polymertesting.2024.108682 · Cited by 8
Metadata
- Authors
- Sinha Ray, S., Yamada, K., Okamoto, M., Ogami, A., & Ueda, K.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-03-01
- Volume
- 15
- Issue
- 7
- Pages
- 1456-1465
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W1998807642
- Cited by
- 453
- References
- 36
- FWCI
- 17.94
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.