The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
Deformation-Induced Color Changes in Melt-Processed Photoluminescent Polymer Blends
Abstract
Binary blends of linear low-density polyethylene (LLDPE) and a series of highly photoluminescent (PL) 1,4-bis(α-cyano-4-alkoxystyryl)benzenes were prepared using melt-processing techniques. It was shown that the phase behavior of these blends, which comprised 0.01−3% w/w of the PL guest, could be controlled via the molecular structure of the dye, its concentration, and the processing conditions. Because of the dyes' strong tendencies to form excimers, the emission characteristics of the blends strongly depended on the extent of molecular aggregation of the PL guest molecules. Bathochromic shifts of up to 147 nm were observed when comparing the PL emission spectra of molecularly mixed blends with samples that comprise aggregates of the dyes. Phase-separated blends with apparently very small dye aggregates could be produced by rapidly quenching the samples after melt processing and subsequent plasticization with a hydrocarbon solvent. The mechanical deformation of the blends thus produced led to a pronounced change of the materials PL characteristics. When the films were stretched to a draw ratio λ = ( l − l 0 )/ l 0 = 500%, the monomer to excimer emission ratios I M / I E were increased by a factor of up to 10. This effect appears to bear significant potential for the use of such dyes as internal strain sensors in polymer objects.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Principles of polymer chemistry
Oster, G. (1954) · Journal of Chemical Education · doi:10.1021/ed031p669.2 · Cited by 2,503
Efficient light-emitting diodes based on polymers with high electron affinities
Greenham, N. C., Moratti, S. C., Bradley, D. D. C., Friend, R. H., & Holmes, A. B. (1993) · Nature · doi:10.1038/365628a0 · Cited by 1,653
Essentials of molecular photochemistry
(1991) · Choice Reviews Online · doi:10.5860/choice.29-0309 · Cited by 718
Birks, J. B. (1975) · Reports on Progress in Physics · doi:10.1088/0034-4885/38/8/001 · Cited by 621
Polymer photophysics and photochemistry
Allen, N. S. (1985) · Polymer Photochemistry · doi:10.1016/0144-2880(85)90037-5 · Cited by 397
Löwe, C., & Weder, C. (2002) · Advanced Materials · doi:10.1002/1521-4095(20021118)14:22<1625::aid-adma1625>3.0.co;2-q · Cited by 361
Self-citationTuning of Fluorescence in Films and Nanoparticles of Oligophenylenevinylenes
Oelkrug, D., Tompert, A., Gierschner, J., Egelhaaf, H.-J., Hanack, M., Hohloch, M., & Steinhuber, E. (1998) · The Journal of Physical Chemistry B · doi:10.1021/jp973225d · Cited by 361
High electron affinity polymers for LEDs
Moratti, S. C., Cervini, R., Holmes, A. B., Baigent, D. R., Friend, R. H., Greenham, N. C., Grüner, J., & Hamer, P. J. (1995) · Synthetic Metals · doi:10.1016/0379-6779(94)03193-a · Cited by 199
Synthesis of conjugatedbridged triphenylenes and application in OLEDs
Freudenmann, R., Behnisch, B., & Hanack, M. (2001) · Journal of Materials Chemistry · doi:10.1039/b100083g · Cited by 118
Turro, N. J., & Arora, K. S. (1986) · Polymer · doi:10.1016/0032-3861(86)90140-0 · Cited by 90
Cited by
Mechanically-Induced Chemical Changes in Polymeric Materials
Caruso, M. M., Davis, D. A., Shen, Q., Odom, S. A., Sottos, N. R., White, S. R., & Moore, J. S. (2009) · Chemical Reviews · doi:10.1021/cr9001353 · Cited by 1,372
Mechanically induced luminescence changes in molecular assemblies
Sagara, Y., & Kato, T. (2009) · Nature Chemistry · doi:10.1038/nchem.411 · Cited by 1,239
Mechanoresponsive Luminescent Molecular Assemblies: An Emerging Class of Materials
Sagara, Y., Yamane, S., Mitani, M., Weder, C., & Kato, T. (2016) · Advanced Materials · doi:10.1002/adma.201502589 · Cited by 890
Self-citationReversible Switching of the Emission of Diphenyldibenzofulvenes by Thermal and Mechanical Stimuli
Luo, X., Li, J., Li, C., Heng, L., Dong, Y. Q., Liu, Z., Bo, Z., & Tang, B. Z. (2011) · Advanced Materials · doi:10.1002/adma.201101059 · Cited by 656
Responsive Polymers for Detection and Sensing Applications: Current Status and Future Developments
Hu, J., & Liu, S. (2010) · Macromolecules · doi:10.1021/ma1005815 · Cited by 592
Nagura, K., Saito, S., Yusa, H., Yamawaki, H., Fujihisa, H., Sato, H., Shimoikeda, Y., & Yamaguchi, S. (2013) · Journal of the American Chemical Society · doi:10.1021/ja4055228 · Cited by 536
Dye-containing polymers: methods for preparation of mechanochromic materials
Ciardelli, F., Ruggeri, G., & Pucci, A. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35414d · Cited by 454
Luminescent distyrylbenzenes: tailoring molecular structure and crystalline morphology
Gierschner, J., & Park, S. Y. (2013) · Journal of Materials Chemistry C · doi:10.1039/c3tc31062k · Cited by 437
Oligo(p‐phenylene vinylene)s as a “New” Class of Piezochromic Fluorophores
Kunzelman, J., Kinami, M., Crenshaw, B. R., Protasiewicz, J. D., & Weder, C. (2008) · Advanced Materials · doi:10.1002/adma.200701772 · Cited by 421
Self-citationThermochromic Polymers—Function by Design
Seeboth, A., Lötzsch, D., Ruhmann, R., & Muehling, O. (2014) · Chemical Reviews · doi:10.1021/cr400462e · Cited by 316
Sagara, Y., & Kato, T. (2011) · Angewandte Chemie · doi:10.1002/ange.201100914 · Cited by 312
Xue, S., Qiu, X., Sun, Q., & Yang, W. (2016) · Journal of Materials Chemistry C · doi:10.1039/c5tc04358a · Cited by 284
Shape memory polymers with built-in threshold temperature sensors
Kunzelman, J., Chung, T., Mather, P. T., & Weder, C. (2008) · Journal of Materials Chemistry · doi:10.1039/b718445j · Cited by 241
Self-citationShi, J., Aguilar Suarez, L. E., Yoon, S.-J., Varghese, S., Serpa, C., Park, S. Y., Lüer, L., Roca-Sanjuán, D., Milián-Medina, B., & Gierschner, J. (2017) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.7b08060 · Cited by 217
Polymers and dyes: Developments and applications
Fleischmann, C., Lievenbrück, M., & Ritter, H. (2015) · Polymers · doi:10.3390/polym7040717 · Cited by 188
Tricolor fluorescence switching in a single component mechanochromic molecular material
Kim, H.-J., Gierschner, J., & Park, S. Y. (2020) · Journal of Materials Chemistry C · doi:10.1039/d0tc01032d · Cited by 36
Metadata
- Authors
- Crenshaw, B. R., & Weder, C.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2003-11-08
- Volume
- 15
- Issue
- 25
- Pages
- 4717-4724
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W1976138670
- Cited by
- 291
- References
- 16
- FWCI
- 2.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.