The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Multifunctional Polyurea Aerogels from Isocyanates and Water. A Structure−Property Case Study
Abstract
It is well-known that isocyanates and water yield polyureas; however, that reaction is not generally associated with the synthesis of the latter, being used instead for environmental curing of films baring free NCO groups or for foaming polyurethanes. Here we report that careful control of the relative isocyanate/water/catalyst (Et 3 N) ratio in acetone, acetonitrile, or DMSO prevents precipitation, yielding instead polyurea (PUA) gels convertible to highly porous (up to 98.6% v/v) aerogels over a very wide density range (0.016−0.55 g cm −3 ). The method has been implemented successfully with several aliphatic and aromatic di and triisocyanates. PUA aerogels have been studied at the molecular level ( 13 C NMR, IR, XRD), the elementary nanoparticle level (SANS/USANS), and the microscopic level (SEM). Their porous structure has been probed with N 2 -sorption porosimetry. Despite that the nanomorphology varies with density from fibrous at the low density end to particulate at the high density end, all samples consist of similarly sized primary particles assembled differently, probably via a reaction-limited cluster−cluster aggregation mechanism at the low density end, which changes into diffusion-limited aggregation as the isocyanate concentration increases. Higher density PUA aerogels (>0.3 g cm −3 ) are mechanically strong enough to tolerate the capillary forces of evaporating low surface tension solvents (e.g., pentane) and can be dried under ambient pressure; under compression, they can absorb energy (up to 90 J g −1 at 0.55 g cm −3 ) at levels observed only with polyurea-cross-linked silica and vanadia aerogels (50−190 J g −1 at similar densities). At cryogenic temperatures (−173 °C) PUA aerogels remain relatively ductile, a fact attributed to sintering effects and their entangled fibrous nanomorphology. Upon pyrolysis (>500 °C, Ar), PUA aerogels from aromatic isocyanates are converted to carbon aerogels in high yields (∼60% w/w). Those properties, considered together with the simple synthetic protocol, render PUA aerogels attractive multifunctional materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Odian, G. (2004) · doi:10.1002/047147875x · Cited by 7,158
Chemistry of Aerogels and Their Applications
Pierre, A. C., & Pajonk, G. M. (2002) · Chemical Reviews · doi:10.1021/cr0101306 · Cited by 2,239
Carbon application in chemical power sources
Fialkov, A. S. (2000) · Russian Journal of Electrochemistry · doi:10.1007/bf02756940 · Cited by 47
Cited by
Biopolymer Aerogels and Foams: Chemistry, Properties, and Applications
Zhao, S., Malfait, W. J., Guerrero‐Alburquerque, N., Koebel, M. M., & Nyström, G. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201709014 · Cited by 755
Parale, V. G., Kim, T., Choi, H., Phadtare, V. D., Dhavale, R. P., Kanamori, K., & Park, H. (2024) · Advanced Materials · doi:10.1002/adma.202307772 · Cited by 146
Silica Centered Aerogels as Advanced Functional Material and Their Applications: A Review
Ahmad, S., Ahmad, S., & Sheikh, J. N. (2023) · Journal of Non-Crystalline Solids · doi:10.1016/j.jnoncrysol.2023.122322 · Cited by 97
Metadata
- Authors
- Leventis, N., Sotiriou-Leventis, C., Chandrasekaran, N., Mulik, S., Larimore, Z. J., Lu, H., Churu, G., & Mang, J. T.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2010-12-03
- Volume
- 22
- Issue
- 24
- Pages
- 6692-6710
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2313657728
- Cited by
- 191
- References
- 3
- FWCI
- 3.04
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Multifunctional Polyurea Aerogels from Isocyanates and Water. A Structure−Property Case Study. https://app.cochat.ai/papers/10.1021/cm102891d
- The paper
- Leventis, N., Sotiriou-Leventis, C., Chandrasekaran, N., Mulik, S., Larimore, Z. J., Lu, H., Churu, G., & Mang, J. T. (2010). Multifunctional Polyurea Aerogels from Isocyanates and Water. A Structure−Property Case Study. Chemistry of Materials. https://doi.org/10.1021/cm102891d
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.