The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Hydrogen Production via Chemical Looping Redox Cycles Using Atomic Layer Deposition-Synthesized Iron Oxide and Cobalt Ferrites
Abstract
Iron oxide (γ-Fe 2 O 3 ) and cobalt ferrite (Co x Fe 3− x O 4 ) thin films were synthesized via atomic layer deposition (ALD) on high surface-area (50 m 2 g −1 ) m-ZrO 2 supports. The oxide films were grown by sequentially depositing iron oxide and cobalt oxide, adjusting the number of iron oxide to cobalt oxide cycles to achieve a desired stoichiometry. High resolution transmission electron microscopy and X-ray diffraction indicate that the films are crystalline and have a thickness of ∼2.5 nm. Raman spectroscopy was used to confirm the predominance of the spinel phase in the case of cobalt ferrite. Films were chemically reduced at 600 °C using mixtures of H 2, CO, and CO 2 . The evolution of oxide phases as a function of time during this reduction was observed using in situ X-ray diffraction, showing that γ-Fe 2 O 3 are reduced only to FeO, while Co x Fe 3− x O 4 are reduced all the way to a Co/Fe alloy. Subsequent water splitting measurements in a stagnation flow reactor yielded peak H 2 rates exceeding virtually all of those reported in the literature. Co 0.85 Fe 2.15 O 4 films were successfully cycled without deactivation and produced four times more H 2 than γ-Fe 2 O 3 films principally because of the deeper chemical reduction possible. Together, these results suggest a path to robust materials for chemical looping cycles and thermal gas splitting. They also indicate that ALD films can serve as an effective platform for probing the surface chemistry of these processes, since they maintain their reactivity at these temperatures, in contrast with oxide powders that are deactivated by sintering and grain growth.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Size-dependent structural transformations of hematite nanoparticles. 1. Phase transition
Chernyshova, I. V., Hochella Jr, M. F., & Madden, A. S. (2007) · Physical Chemistry Chemical Physics · doi:10.1039/b618790k · Cited by 463
Cited by
Catalyst Design with Atomic Layer Deposition
O’Neill, B. J., Jackson, D. H. K., Lee, J., Canlas, C., Stair, P. C., Marshall, C. L., Elam, J. W., Kuech, T. F., Dumesic, J. A., & Huber, G. W. (2015) · ACS Catalysis · doi:10.1021/cs501862h · Cited by 782
Carrillo, A. J., González-Aguilar, J., Romero, M., & Coronado, J. M. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00315 · Cited by 630
Atomic Layer Deposition of Nanostructured Materials for Energy and Environmental Applications
Marichy, C., Bechelany, M., & Pinna, N. (2012) · Advanced Materials · doi:10.1002/adma.201104129 · Cited by 591
Review of hydrogen production using chemical-looping technology
Luo, M., Yi, Y., Wang, S., Wang, Z., Du, M., Pan, J., & Wang, Q. (2018) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2017.07.007 · Cited by 528
Sr- and Mn-doped LaAlO3−δ for solar thermochemical H2 and CO production
McDaniel, A. H., Miller, E. C., Arifin, D., Ambrosini, A., Coker, E. N., O'Hayre, R., Chueh, W. C., & Tong, J. (2013) · Energy & Environmental Science · doi:10.1039/c3ee41372a · Cited by 383
Self-citation
Metadata
- Authors
- Scheffe, J. R., Allendorf, M. D., Coker, E. N., Jacobs, B. W., McDaniel, A. H., & Weimer, A. W.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2011-03-24
- Volume
- 23
- Issue
- 8
- Pages
- 2030-2038
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2330131004
- Cited by
- 176
- References
- 1
- FWCI
- 5.65
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.