The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Semiconductor Nanowire Fabrication by Bottom-Up and Top-Down Paradigms
Open accessAbstract
Semiconductor nanowires have been the subject of intensive research investment over the past few decades. Their physical properties afford them applications in a vast network of active microelectronic research fields, including logic device scaling in very large scale integrated circuits, sensor devices, and energy harvesting. A range of routes to semiconductor nanowire production have opened up as a result of advances in nanowire fabrication techniques over the last number of decades. These nanowire fabrication routes can usually be categorized into one of two paradigms, bottom-up or top-down. Microelectronic systems typically rely on integrated device platforms, where each device and component thereof can be individually addressed. This requirement for precise addressability places significant demands on the mode of fabrication, specifically with regard to device definition, placement and density, which have typically been strengths of top-down fabrication processes. However, in recent years, advances in bottom-up fabrication processes have opened up the possibility of a synergy between bottom-up and top-down processes to achieve the benefits of both. This review article highlights the important considerations required for the continued advancement of semiconductor nanowire fabrication with a focus on the application of semiconductor nanowire fabrication for next-generation field-effect transistor devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chemistry and Properties of Nanocrystals of Different Shapes
Burda, C., Chen, X., Narayanan, R., & El-Sayed, M. A. (2005) · Chemical Reviews · doi:10.1021/cr030063a · Cited by 7,230
Enhanced thermoelectric performance of rough silicon nanowires
Hochbaum, A. I., Chen, R., Delgado, R. D., Liang, W., Garnett, E. C., Najarian, M., Majumdar, A., & Yang, P. (2008) · Nature · doi:10.1038/nature06381 · Cited by 4,109
Polymer brushes: surface-immobilized macromolecules
Zhao, B., & Brittain, W. J. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00012-5 · Cited by 1,628
Cited by
Nanowire Electronics: From Nanoscale to Macroscale
Jia, C., Lin, Z., Huang, Y., & Duan, X. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00164 · Cited by 373
Evolution in Lithography Techniques: Microlithography to Nanolithography
Sharma, E., Rathi, R., Misharwal, J., Sinhmar, B., Kumari, S., Dalal, J., & Kumar, A. (2022) · Nanomaterials · doi:10.3390/nano12162754 · Cited by 257
Mojarad, N., Hojeij, M., Wang, L., Gobrecht, J., & Ekinci, Y. (2015) · Nanoscale · doi:10.1039/c4nr07420c · Cited by 102
Lodha, J. K., Pollentier, I., Conard, T., Vallat, R., De Gendt, S., & Armini, S. (2022) · Applied Surface Science · doi:10.1016/j.apsusc.2022.154657 · Cited by 16
Metadata
- Authors
- Hobbs, R. G., Petkov, N., & Holmes, J. D.
- Venue
- Chemistry of Materials
- Publisher
- American Chemical Society (ACS)
- Published
- 2012-05-02
- Volume
- 24
- Issue
- 11
- Pages
- 1975-1991
- ISSN
- 0897-4756 (ISSN-L)
- 1520-5002
- OpenAlex
- W2028629374
- Cited by
- 320
- References
- 3
- FWCI
- 12.03
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.